• PS3 Hacks, Uncategorized , 30.03.2013

    The long awaited fix for Progskeet 1.2 is finally here, uf6667 confirms this should fix the write issues people were getting with 1.2

    uf6667 said he will get it on progskeet.com later on hopefully
    Enjoy!

     photo progskeet2_zps623d8848.jpg

    ProgSkeet_12_130330_1909.dat

    Source PS3 Dev Wiki

    Discuss in Forums (368)


  • 368 Comments

    1. Sarah1331
      03-30-2013
      02:31 PM
      1

      Hopefully it does work as my new adaptor can also work with it

    2. KopKaasDamp
      03-30-2013
      02:41 PM
      2

      [MENTION=269704]Progskeet_Release[/MENTION] , do you know a fix for the driver install error 43 on w7x64?
      I have the 1.21 version.

    3. Progskeet_Release
      03-30-2013
      02:44 PM
      3

      Originally Posted by KopKaasDamp
      [MENTION=269704]Progskeet_Release[/MENTION] , do you know a fix for the driver install error 43 on w7x64?
      I have the 1.21 version.
      Use a 32bit OS, Preferably Win XP 32b

    4. Metion
      03-30-2013
      02:50 PM
      4

      Still waiting for official f***ing nor clip

    5. Progskeet_Release
      03-30-2013
      02:50 PM
      5

      Why has the post gone back to the unedited one, I posted an updated link (sendspace one) which is the one linked on devwiki, please change post to the edited one if you can :P

    6. euss
      03-30-2013
      02:51 PM
      6

      note: this will make the 1.2/1.21 work like a 1.1w


      The long awaited fix for Progskeet 1.2 is finally here, I confirm this should fix the write issues people were getting with 1.2

      I will get it on progskeet.com later on hopefully to confirm its legit.
      Enjoy!

      ProgSkeet_12_130330_1909.dat

      http ://www .sendspace. com/file/ua6u2o
      -Updated link
      Remove the spaces, i need 15 posts to post links :P

      -uf6667
      Here you are uf6667

      The long awaited fix for Progskeet 1.2 is finally here, uf6667 confirms this should fix the write issues people were getting with 1.2

      uf6667 said he will get it on progskeet.com later on hopefully
      Enjoy!

      photo progskeet2_zps623d8848.jpg

      ProgSkeet_12_130330_1909.dat

      Source PS3 Dev Wiki
      Here you are not uf6667

      I am confused now :o

    7. Progskeet_Release
      03-30-2013
      02:53 PM
      7

      Originally Posted by Metion
      Still waiting for official f***ing nor clip
      Never promised any Nor clips or any official progskeet clip, that idea has been scrapped and QSB's are at final stage, stress tests are being done so please be patient some more.

    8. Simonbuck
      03-30-2013
      02:56 PM
      8

      Originally Posted by Progskeet_Release
      Why has the post gone back to the unedited one, I posted an updated link (sendspace one) which is the one linked on devwiki, please change post to the edited one if you can :P

      http://www.sendspace.com/file/ua6u2o

    9. Progskeet_Release
      03-30-2013
      02:57 PM
      9

      Originally Posted by euss
      note: this will make the 1.2/1.21 work like a 1.1w


      Here you are uf6667

      Here you are not uf6667

      I am confused now :o
      He told me to post as him because he cant get it on official progskeet site yet, I dont want people saying its a fake/virus etc.. this forum doesn't really give people an easy time :P

    10. euss
      03-30-2013
      03:00 PM
      10

      Originally Posted by Progskeet_Release
      He told me to post as him because he cant get it on official progskeet site yet, I dont want people saying its a fake/virus etc.. this site is a funny one :P
      I also had it posted already on both Progskeet pages in ps3devwiki.com (and I do not think I am easily mistaken for a fake :P)

      Eitherway, the "being uf6667 or not" was rather confusing, hence why greg asked me about it and I pointed to the wiki with already that bitstream on it

    11. Progskeet_Release
      03-30-2013
      03:02 PM
      11

      Originally Posted by euss
      I also had it posted already on both Progskeet pages in ps3devwiki.com (and I do not think I am easily mistaken for a fake :P)
      Ahh well, I've lurked on this forum a long while and some user here give others to much grief
      Nobody on this forum has the knowledge you have Sir eussNL :P

    12. GregoryRasputin
      03-30-2013
      03:08 PM
      12

      Originally Posted by Progskeet_Release
      and some user here give others to much grief
      Some users deserve the grief.

    13. Progskeet_Release
      03-30-2013
      03:12 PM
      13

      Originally Posted by GregoryRasputin
      Some users deserve the grief.
      I suppose :P
      [MENTION=131344]euss[/MENTION] I wasn't aware it was already on the wiki, uf6667 came to me with it today and just said post it pretending to be me xD. I haven't been on a computer for a couple weeks as i moved house so so havn't been informed on any news :P

    14. Metion
      03-30-2013
      03:15 PM
      14

      Originally Posted by Progskeet_Release
      Never promised any Nor clips or any official progskeet clip, that idea has been scrapped and QSB's are at final stage, stress tests are being done so please be patient some more.
      Nor/nand clips are not the best solution, i get it, but on the E3 flasher they work, not that great but they work and there are lots of dump checker to be 100% sure when flashing.. so i dont know why so many problems about clips..

    15. Sarah1331
      03-30-2013
      03:17 PM
      15

      Originally Posted by Metion
      Nor/nand clips are not the best solution, i get it, but on the E3 flasher they work, not that great but they work and there are lots of dump checker to be 100% sure when flashing.. so i dont know why so many problems about clips..
      Clips are crap my adaptors are great

    16. Progskeet_Release
      03-30-2013
      03:19 PM
      16

      Originally Posted by Metion
      Nor/nand clips are not the best solution, i get it, but on the E3 flasher they work, not that great but they work and there are lots of dump checker to be 100% sure when flashing.. so i dont know why so many problems about clips..
      Thats for the devs to decide on, I'm just passing on the news, They obviously think its just not worth it as there are clips available that work fine for nand and the nor testpoint are easy to solder to.

    17. Sarah1331
      03-30-2013
      03:22 PM
      17

      Maybe win skeet that flashes on NAND 2

    18. 4DoorITR
      03-30-2013
      03:42 PM
      18

      Originally Posted by Progskeet_Release
      Thats for the devs to decide on, I'm just passing on the news, They obviously think its just not worth it as there are clips available that work fine for nand and the nor testpoint are easy to solder to.
      Do you know if this bitstream fixes writing to NAND from both the A and B sides?

    19. Progskeet_Release
      03-30-2013
      03:44 PM
      19

      Originally Posted by Sarah1331
      Maybe win skeet that flashes on NAND 2
      Yes would be nice to have, Its not that much of a big deal to me though but I do think bmx should fix that :P

    20. Sarah1331
      03-30-2013
      03:45 PM
      20

      Originally Posted by 4DoorITR
      Do you know if this bitstream fixes writing to NAND from both the A and B sides?
      That's winskeet

    21. Progskeet_Release
      03-30-2013
      03:50 PM
      21

      Originally Posted by 4DoorITR
      Do you know if this bitstream fixes writing to NAND from both the A and B sides?
      You mean on the adapter?
      I think 1.2 addressed that problem but i think it needs new software for Nand tab 2 to work, not sure really.
      ************* [ - Post Merged - ] *************
      uf just said he will fix the software so Nand 2 works :D

    22. ModderFokker619
      03-30-2013
      04:13 PM
      22

      Finally. Gonna give this new bitsream a go. Thanks.

    23. Sarah1331
      03-30-2013
      04:22 PM
      23

      Originally Posted by Progskeet_Release
      You mean on the adapter?
      I think 1.2 addressed that problem but i think it needs new software for Nand tab 2 to work, not sure really.
      ************* [ - Post Merged - ] *************
      uf just said he will fix the software so Nand 2 works :D
      Wire to skeet 1.1 and NAND 1 reads and writes NAND 2 only reads

    24. Progskeet_Release
      03-30-2013
      04:41 PM
      24

      Originally Posted by Sarah1331
      Wire to skeet 1.1 and NAND 1 reads and writes NAND 2 only reads
      Ok I'll let him know

    25. Sarah1331
      03-30-2013
      04:51 PM
      25

      Originally Posted by Progskeet_Release
      Ok I'll let him know
      Ill be great full if progskeet 1.1 on retail or sl bitstream can read and write two NANDs

    26. Progskeet_Release
      03-30-2013
      04:56 PM
      26

      Originally Posted by Sarah1331
      Clips are crap my adaptors are great
      Its shame you priced them so high :P

      [21:10] <@bmx> this nand adapter looks like mine, except the price : 0.5euro
      [21:10] <uf6667> exactly!
      [21:10] <uf6667> not only that
      [21:10] <uf6667> yours even has 2 nand
      [21:10] <@bmx> or better, $0.5
      [21:10] <uf6667> and nor
      [21:10] <@bmx> yeah

      If they had realized people actually used these they would be free with Progskeet purchase xD

      Originally Posted by Sarah1331
      Ill be great full if progskeet 1.1 on retail or sl bitstream can read and write two NANDs
      We all would but if its solderless its not to much hassle to do 1 at a time, For wired bitstream yes, very needed :P

    27. Sarah1331
      03-30-2013
      05:00 PM
      27

      Originally Posted by Progskeet_Release
      Its shame you priced them so high :P

      [21:10] this nand adapter looks like mine, except the price : 0.5euro
      [21:10] exactly!
      [21:10] not only that
      [21:10] yours even has 2 nand
      [21:10] or better, $0.5
      [21:10] and nor
      [21:10] yeah

      If they had realized people actually used these they would be free with Progskeet purchase xD
      ************* [ - Post Merged - ] *************


      We all would but if its solderless its not to much hassle to do 1 at a time, For wired bitstream yes, very needed :P
      Why not give free then ???

      Make a free nor and NAND adaptor please

      And do you mean like my adaptor two NAND and nor

    28. Progskeet_Release
      03-30-2013
      05:04 PM
      28

      Originally Posted by Sarah1331
      Why not give free then ???

      Make a free nor and NAND adaptor please
      He said he never realized at the time that people would even use these adapters, Maybe he will soon or just sell them at next to nothing.

      He said 2 and a nor so maybe something like that adapter yes, never seen theirs though :P

    29. Sarah1331
      03-30-2013
      05:07 PM
      29

      Originally Posted by Progskeet_Release
      He said he never realized at the time that people would even use these adapters, Maybe he will soon or just sell them at next to nothing.
      Yes they could make production cost real cheaper than me

      But they need to fix NAND two read write for this kind of adaptor

    30. uf6667
      03-30-2013
      05:14 PM
      30

      fine, I'll add them for new sets for free
      but come on 30 quid for a 2 layer pcb? you and I know that's bollocks mate
      even in prototyping I get like what, 32 of those boards? for 200 quid I get 200+ of those boards

      but yeah, I didn't think those were useful because of the desoldering and resoldering, which defeats the purpose of "in-circuit-programming"

    31. Metion
      03-30-2013
      05:14 PM
      31

      Originally Posted by Sarah1331
      Clips are crap my adaptors are great
      never heard of them, then i saw your signature, whit those adaptors can i achieve a full solderless nand downgrade? nothing for nor?

    32. Brenza
      03-30-2013
      05:17 PM
      32

      c'mon, are you serios? why you started selling this chip MONTHS before you release the tools to use it?

    33. uf6667
      03-30-2013
      05:17 PM
      33

      what stumps me is that they're advertised as "solderless" but you need to desolder and resolder them at least 3x (6 soldering processes in total)

      lying much mate?
      ************* [ - Post Merged - ] *************

      Originally Posted by Brenza
      c'mon, are you serios? why you started selling this chip MONTHS before you release the tools to use it?
      I'm not the one that puts them into production, the chain of command is ****ed up, you don't want to know
      but to clear things up a bit: I've been having a lot of stuff to do these last months (right after I released the bitstream to at least make 1.2 work), lost like half my memory and I'm only getting back on track now
      on top of that, I have to study alot for exams

    34. Sarah1331
      03-30-2013
      05:37 PM
      34

      Originally Posted by uf6667
      what stumps me is that they're advertised as "solderless" but you need to desolder and resolder them at least 3x (6 soldering processes in total)

      lying much mate?
      ************* [ - Post Merged - ] *************


      I'm not the one that puts them into production, the chain of command is ****ed up, you don't want to know
      but to clear things up a bit: I've been having a lot of stuff to do these last months (right after I released the bitstream to at least make 1.2 work), lost like half my memory and I'm only getting back on track now
      on top of that, I have to study alot for exams
      You see it will also use a clip
      without the purchase of the injectus to reprogram it
      the bull**** is that you made adaptor and made people swap bitstream when you could have made same as me for cheaper

      And it's not £30 it's £20.99

      Postage costs me £9 internationally and you can buy 10000 connectors I cannot thus my margin is greater and everything costs me 10 x more

      Get the feeling you don't like people fixing your bull **** products

      Come on where was the joke really

      Edit : I am glad to hear you will sell the NAND adaptor

      Ps can you please sell a nor adaptor aswell

      When you do this I will stop I only made one for myself and everyone started to ask me for it

    35. baileyscream
      03-30-2013
      08:34 PM
      35

      shame progskeet carnt answer questions in there own "support" threads.

      also a shame progskeet kept on selling a product without its advertised features when they could have pulled the 1.2 from the shelves and re-produced the 1.1 untill this fix was done.

      do you run squirt in the same way?

      and if you looked in the progskeet "support" threads you would have seen [MENTION=245343]Sarah1331[/MENTION] 's adaptor boards have been mentioned. so it wouldnt have been much of a supprise to know ppl are using these.

    36. M8nTrap
      03-31-2013
      04:09 AM
      36

      I'm too lazy to connect this ****ing flash device! to try this ****ing bitstream! it's been so long...

      merci pour cette fabuleuse longue attente silencieuse et merdique UF!

    37. 3absiso
      03-31-2013
      04:33 AM
      37

      Originally Posted by baileyscream
      shame progskeet carnt answer questions in there own "support" threads.

      also a shame progskeet kept on selling a product without its advertised features when they could have pulled the 1.2 from the shelves and re-produced the 1.1 untill this fix was done.

      do you run squirt in the same way?

      and if you looked in the progskeet "support" threads you would have seen [MENTION=245343]Sarah1331[/MENTION] 's adaptor boards have been mentioned. so it wouldnt have been much of a supprise to know ppl are using these.
      Threads are deleted and People get Banned for Nothing,

      But never the less good to have working Bitstream for 1.2. although i sent it to be mod to V1.1, have no regrets at all.
      Keep up the good work Andy, your Work is highly appreciated.

    38. haz367
      03-31-2013
      04:40 AM
      38

      tis bitsream makes it act as a 1.1 right? and that stuff ur putting out for free now..great for new buyers..what about us...to make up can u send us a 1.2.1...weird behaviour here...oh well i can't solder it anyway so wtf i'm crying about thx for the "late"update anyway..

    39. vb_encryption_vb
      03-31-2013
      04:44 AM
      39

      I have an e3 flasher, and a progskeet 1.2...The 1.2 to will still sit and collect dust.

    40. Haidarooz
      03-31-2013
      05:57 AM
      40

      FU*ING AT LAST! AFTER HALF YEAR!!!!!

    41. baileyscream
      03-31-2013
      06:14 AM
      41

      Originally Posted by uf6667
      fine, I'll add them for new sets for free
      but come on 30 quid for a 2 layer pcb? you and I know that's bollocks mate
      even in prototyping I get like what, 32 of those boards? for 200 quid I get 200+ of those boards

      but yeah, I didn't think those were useful because of the desoldering and resoldering, which defeats the purpose of "in-circuit-programming"
      wow your having ago about how much a fully working board costs!

      did you have the same feelings when the progskeet 1.2 was being sold?

      that board is a very expensive for what it did do. and very dissapointing for only doing "some" NAND and "no" NOR chips.

      it was even more bizzare that NAND was fixed first when NOR was the reason ppl bought this board

    42. guerrierodipace
      03-31-2013
      06:41 AM
      42

      I just remember to all that today is 1 April
      just in case

    43. sonyweb
      03-31-2013
      03:23 PM
      43

      Originally Posted by guerrierodipace
      I just remember to all that today is 1 April
      just in case

      And it's my birthday too.

      So I'm celebrating with my five v1.2 progskeets bought so far!!!

    44. 3absiso
      03-31-2013
      03:44 PM
      44

      Originally Posted by sonyweb
      And it's my birthday too.

      So I'm celebrating with my five v1.2 progskeets bought so far!!!
      And Why do you Have Five V1.2, so we can say SONYWEB Has 5 PRogSkeets like the one with 3 or 23 PS3s
      still banned over Dayton Forum?

    45. sonyweb
      03-31-2013
      04:17 PM
      45

      Originally Posted by 3absiso
      And Why do you Have Five V1.2, so we can say SONYWEB Has 5 PRogSkeets like the one with 3 or 23 PS3s
      still banned over Dayton Forum?
      Nope!!!
      I can now happily resell them with a working bitstream.
      E3 flasher is now my ultimate choice.

    46. Progskeet_Release
      03-31-2013
      07:18 PM
      46

      Originally Posted by haz367
      tis bitsream makes it act as a 1.1 right? and that stuff ur putting out for free now..great for new buyers..what about us...to make up can u send us a 1.2.1...weird behaviour here...oh well i can't solder it anyway so wtf i'm crying about thx for the "late"update anyway..
      Adapters are going to be supplied with new kits, If you already a 1.2 then uf said he might get them out to resellers and they will be dirt cheap.

      Originally Posted by guerrierodipace
      I just remember to all that today is 1 April
      just in case
      So?
      This was posted on the 31st, this release is no hoax.
      ************* [ - Post Merged - ] *************
      Would also like to hear some feedback if anyone has used this updated stream yet, If any problems I will let uf6667 know, I can't test this yet untill uf6667 has sent me 1 of his developer progskeets.

    47. 4DoorITR
      03-31-2013
      09:24 PM
      47

      Would also like to hear some feedback if anyone has used this updated stream yet, If any problems I will let uf6667 know, I can't test this yet untill uf6667 has sent me 1 of his developer progskeets.
      I can say it didn't break NAND. I will test a NOR soon.

    48. Sarah1331
      04-01-2013
      01:43 AM
      48

      Originally Posted by Progskeet_Release
      Adapters are going to be supplied with new kits, If you already a 1.2 then uf said he might get them out to resellers and they will be dirt cheap.
      might ... Lol might they work or is it a we might have to fix it in 6 month or might have to wait for some one man band to fix it for us or will it just say migh work might not or might it just not find its way to production or might there be another poor production line fault

      So?
      This was posted on the 31st, this release is no hoax.
      take a joke no doubt you might be uf

      ************* [ - Post Merged - ] *************
      Would also like to hear some feedback if anyone has used this updated stream yet, If any problems I will let uf6667 know, I can't test this yet untill uf6667 has sent me 1 of his developer progskeets.
      The reason no one has left feedback might be because everyone have purchased a better flasher that works or they might have paid to get there console downgraded or they might have just got sick of waiting
      Or they might think F U never again
      I personally hope progskeet sell nothing again but then again they might bring a 1.3 out ea?

      I cannot believe a team has took 6 month to fix a sold product

      And winskeet don't work on NAND 2 even tho the history says it does

      And skeet 1.1 don't work on it own adaptor board NAND b

      Then again it might one day

      Does uf just not like someone thinking of a good solution and taking a taste of the pie

      Then again I guess he already thought of all these in the past
      Ps where's the NAND qsb
      The nor qsb only surfaced after Andy made and proved it working
      [MENTION=192300]uf6667[/MENTION]
      If you make same as my NAND adaptor please make nor as this is next from me
      Oh And please make it for retail bitstream (NAND I mean)
      And maybe put my name under a thanks for the idea

      (Points for finding the hidden might)

    49. M8nTrap
      04-01-2013
      02:44 AM
      49

      this bitstream is not working again...
      i cannot flash "Nor memory" with this latest version...lol

      i just stop to play the guinea pig for this company...I prefer write a nice letter to a french consumer defense group for denounce all the positive comments and false descriptions about progskeet products on french webshops in the last 5 months...

    50. Sarah1331
      04-01-2013
      02:49 AM
      50

      Originally Posted by M8nTrap
      this bitstream is not working again...
      i cannot flash "Nor memory" with this latest version...lol

      i just stop to play the guinea pig for this company...I prefer write a nice letter to a french consumer defense group for denounce all the positive comments and false descriptions about progskeet products on french webshops in the last 5 months...
      Serious or are you just having a joke

    51. M8nTrap
      04-01-2013
      02:59 AM
      51

      i'm serious! i have rebuild the ps1.2 in original configuration, to test the bitstream and it didn't work for me...I cannot put my hand on UF but I can make trouble to the french webshops...

    52. Sarah1331
      04-01-2013
      03:00 AM
      52

      Originally Posted by M8nTrap
      i'm serious! i have rebuild the ps1.2 in original configuration, to test the bitstream and it didn't work for me...I cannot put my hand on UF but I can make trouble to the french webshops...
      Are the caps all bridged or is that not a problem ??

      Maybe they will fix in 6 month

    53. M8nTrap
      04-01-2013
      03:11 AM
      53

      the bitstream is charged correctly in the ps1.2 via the injectus board,

      I removed the r8 switch mod and with or without "ready or tristate" points connected, I have no result...or maybe in six month.. yes!!!

    54. Progskeet_Release
      04-01-2013
      03:22 AM
      54

      Originally Posted by M8nTrap
      this bitstream is not working again...
      i cannot flash "Nor memory" with this latest version...lol

      i just stop to play the guinea pig for this company...I prefer write a nice letter to a french consumer defense group for denounce all the positive comments and false descriptions about progskeet products on french webshops in the last 5 months...

      And what NOR Flash memory do you have?
      I'm sure this stream will work for NOR, Try slowpoke and flash at 8bytes max if its Spansion, or refer to the wiki for the Datasheets for your flash.
      Like uf said, He has a life to plus exams.
      I should have the 1.2 uf is sending to me next week so i'll get to work on testing it on NOR models.


      [MENTION=245343]Sarah1331[/MENTION], Theres no need to keep saying NAND 2 Tab doesn't work, I heard you the 1st, 2nd and 3rd time.
      uf6667 didn't even know it was bugged untill I told him 2 days ago, He said he would fix the software.
      Why should he put his future on hold for a scene that sucks the life out of itself, I admit it could have been handled better but I'd choose my future over the PS3 scene anyday..

    55. Sarah1331
      04-01-2013
      03:31 AM
      55

      Originally Posted by Progskeet_Release
      And what NOR Flash memory do you have?
      I'm sure this stream will work for NOR, Try slowpoke and flash at 8bytes max if its Spansion, or refer to the wiki for the Datasheets for your flash.
      I should have the 1.2 uf is sending to me next week so i'll get to work on testing it on NOR models.


      [MENTION=245343]Sarah1331[/MENTION], Theres no need to keep saying NAND 2 Tab doesn't work, I heard you the 1st, 2nd and 3rd time.
      uf6667 didn't even know it was bugged untill I told him 2 days ago, He said he would fix the software.
      Like uf said, He has a life to plus exams.
      Why should he put his future on hold for a scene that sucks the life out of itself, I admit it could have been handled better but I'd choose my future over the PS3 scene anyday...
      Why put his life on hold ...
      Why sell **** and scam everyone we all have lives oh and NAND 2 has been mentioned in progskeet forums and here for donkeys I find it hard to believe he didn't know

      Maybe he didn't know the 1.2 didn't work until two days ago

    56. Progskeet_Release
      04-01-2013
      03:40 AM
      56

      Originally Posted by Sarah1331
      Why put his life on hold ...
      Why sell **** and scam everyone we all have lives oh and NAND 2 has been mentioned in progskeet forums and here for donkeys I find it hard to believe he didn't know

      Maybe he didn't know the 1.2 didn't work until two days ago
      Your making it sound like he purposely tried to screw people over, that just isn't the case. Can't people just move on and be happy that they can actually use what they paid for, sure it took a while but why hold grudges lol.

    57. ModderFokker619
      04-01-2013
      03:45 AM
      57

      I'm one of the many that got scammed by the Progskeet 1.2 and I must say I'm very dissapointed how the "P" team handled themselves.

      No apologies followed with excuses. You don't think we have a life too? Of course we do, how else we gonna pay for your product that didn't deliver on any level advertised.

      Anyways got my Teensy2.0++ and my 1.2 is just a workbench decor now

    58. Sarah1331
      04-01-2013
      03:53 AM
      58

      Originally Posted by Progskeet_Release
      Your making it sound like he purposely tried to screw people over, that just isn't the case. Can't people just move on and be happy that they can actually use what they paid for, sure it took a while but why hold grudges lol.
      Are you serious why not stop selling it after finding out its poo poo am not saying he purposely did it am in fact gratefully for everything so far I really am but why are you backing him when in fact everyone was screwed overs for 6 month why not offer everyone the chance to return oh that's right he was living it up on profit

      It did not take 6 month to fix if he had exams ect why not rsalease source code for somebody elce to fix why not say it won't do jack for nor flash

      Am guessing your uf6667

      I personally didn't buy a 1.2 so it only angers me that you ****ed over so many customers not a sorry or anything regardless of what has took so long it shouldn't have been sold and 1.21 realeased and still it didn't work and when 1.2 was found not to work it was removed from progskeet.com but your saying we shouldn't hold a grudge come on lad wake up

    59. Progskeet_Release
      04-01-2013
      03:55 AM
      59

      Originally Posted by ModderFokker619
      I'm one of the many that got scammed by the Progskeet 1.2 and I must say I'm very dissapointed how the "P" team handled themselves.

      No apologies followed with excuses. You don't think we have a life too? Of course we do, how else we gonna pay for your product that didn't deliver on any level advertised.

      Anyways got my Teensy2.0++ and my 1.2 is just a workbench decor now
      Well, 1.2 worked fine on NAND flash so it did work, you could read NOR it was just the writing, When 1.2 got to resellers uf6667 was under the impression it would work as intended from the start, lets not forget uf has developer progskeet boards with the right components on it so it worked fine for him, Manufacturers made alot of fkups which then led to the stream needing to be halved in size for it to work as it should with NOR flash.

    60. Sarah1331
      04-01-2013
      03:58 AM
      60

      Originally Posted by Progskeet_Release
      Well, 1.2 worked fine on NAND flash so it did work, you could read NOR it was just the writing, When 1.2 got to resellers uf6667 was under the impression it would work as intended from the start, lets not forget uf has developer progskeet boards with the right components on it so it worked fine for him, Manufacturers made alot of fkups which then led to the stream needing to be halved in size for it to work as it should with NOR flash.
      We know the excuse but it only did NAND after a update then bye bye uf 6 month later ...

    61. 3absiso
      04-01-2013
      03:59 AM
      61

      For Me I was on e of the lucky people to buy one of the last peaces of ProgSkeet V1.1. and i am a proud owner of this peace of Hardware it is my first choice of downgrade because it never fails me.
      When The ProgSkeet V1.2 i bought it immediately without thinking, and since then put it on the Shelf after reading the reviews about it.
      off coarse UF did not do it on purpose, but he should tested it before release and people bought it for the reputation of V1.1. i did.
      and here again ProgSkeet did wrong, they did not make anything official regarding the issue and they could back to V1.1 till a fix is done but they kept advertising V1.2.
      the Reputation of ProgSkeet is as much Low as it goes now, and the team should do something to get back into track.
      after the failure of ProgSkeet V1.2 i went and bought a Teensy, so people are now moving away from ProgSkeet. although some talented people here tried to fix it and convert it to V1.1 and made additions (QSBs, Adaptors) they deserve respect.
      Bottom Line: we would like to see ProgSkeet to shine again but it would take a lot of effort to do it again

    62. sonyweb
      04-01-2013
      04:00 AM
      62

      Originally Posted by Progskeet_Release
      Your making it sound like he purposely tried to screw people over, that just isn't the case. Can't people just move on and be happy that they can actually use what they paid for, sure it took a while but why hold grudges lol.
      Have u used the ps v1.2 to flash any nor ps3 before?

    63. Sarah1331
      04-01-2013
      04:02 AM
      63

      Originally Posted by sonyweb
      Have u used the ps v1.2 to flash any nor ps3 before?
      No he's waiting on a free one lol

      Progskeet have a lot of trust building to do
      I just cannot wait for the adaptors

      Maybe a free tester would be nice
      But am guessing am on the **** list

    64. Progskeet_Release
      04-01-2013
      04:03 AM
      64

      Originally Posted by Sarah1331
      Are you serious why not stop selling it after finding out its poo poo am not saying he purposely did it am in fact gratefully for everything so far I really am but why are you backing him when in fact everyone was screwed overs for 6 month why not offer everyone the chance to return oh that's right he was living it up on profit

      It did not take 6 month to fix if he had exams ect why not rsalease source code for somebody elce to fix why not say it won't do jack for nor flash

      Am guessing your uf6667

      I personally didn't buy a 1.2 so it only angers me that you ****ed over so many customers not a sorry or anything regardless of what has took so long it shouldn't have been sold and 1.21 realeased and still it didn't work and when 1.2 was found not to work it was removed from progskeet.com but your saying we shouldn't hold a grudge come on lad wake up
      I'm not uf6667 lol, and like i said above, uf6667 was under the impression it would work as it should from the start, because he has the right components on his dev boards and the 2121 stream would have worked fine on them.
      And once they hit resellers then it was most likely out of his hands i guess.
      I back him because i appreciate what he's given me, My 1.0, 1.1 have never failed me and I'm patient enough to wait for updates.
      He's even sending me a signed 1.2 green tar edition to complete my collection.
      He really is a nice guy if you get to know him, sure he made mistakes but doesn't everyone?
      ************* [ - Post Merged - ] *************
      Originally Posted by sonyweb
      Have u used the ps v1.2 to flash any nor ps3 before?
      Not 1.2, 1.0 and 1.1 yes
      uf is sending me a 1.2 green tar edition to test this stream, Its a dev board but i will load the retail bitstream on it.

    65. Sarah1331
      04-01-2013
      04:07 AM
      65

      Originally Posted by Progskeet_Release
      I'm not uf6667 lol, and like i said above, uf6667 was under the impression it would work as it should from the start, because he has the right components on his dev boards and the 2121 stream would have worked fine on them.
      And once they hit resellers then it was most likely out of his hands i guess.
      I back him because i appreciate what he's given me, My 1.0, 1.1 have never failed me and I'm patient enough to wait for updates.
      He's even sending me a signed 1.2 green tar edition to complete my collection.
      He really is a nice guy if you get to know him, sure he made mistakes but doesn't everyone?
      ************* [ - Post Merged - ] *************

      Not 1.2, 1.0 and 1.1 yes
      uf is sending me a 1.2 green tar edition to test this stream
      Look I suppose what's done is done

      But maybe a sorry from him wouldn't go amiss

      And not to jump on people like me trying to improve things let's be fair customer relations isn't exactly his strong point

    66. Progskeet_Release
      04-01-2013
      04:13 AM
      66

      Originally Posted by Sarah1331
      Look I suppose what's done is done

      But maybe a sorry from him wouldn't go amiss

      And not to jump on people like me trying to improve things let's be fair customer relations isn't exactly his strong point
      He did say he was sorry in the irc, I did tell him to make a post on here explaining but i guess he's a busy man, its a rare sight when you see uf6667 / uf6668 on the irc :P
      Progskeet is a small team and providing customer relations to the 1000s isn't really doable if hes always busy, #progskeet-support channel has some of the devs in and we do give alot of support there.

    67. Sarah1331
      04-01-2013
      04:19 AM
      67

      Originally Posted by Progskeet_Release
      He did say he was sorry in the irc, I did tell him to make a post on here explaining but i guess he's a busy man, its a rare sight when you see uf6667 / uf6668 on the irc :P
      Progskeet is a small team and providing customer relations to the 1000s isn't really doable if hes always busy, #progskeet-support channel has some of the devs in and we do give alot of support there.
      Will there be a nor adaptor Same as my NAND ??

      Save me the job?

    68. Progskeet_Release
      04-01-2013
      04:34 AM
      68

      Originally Posted by Sarah1331
      Will there be a nor adaptor Same as my NAND ??

      Save me the job?
      Well bmx said he already has the adapter for the skeet with nor on and dual nand its just they didn't realize people would actually use since it involves desoldering and soldering the tsop and not many people have the confidence to do that with there consoles, Now they know people want this kind of thing and they have said they will include it in future kits.
      He also said he would think about getting adapters out to resellers on there own for those who have already purchased 1.2 but they will only be a few dollars but he isn't to sure on this yet.

    69. Sarah1331
      04-01-2013
      04:40 AM
      69

      Originally Posted by Progskeet_Release
      Well bmx said he already has the adapter for the skeet with nor on and dual nand its just they didn't realize people would actually use since it involves desoldering and soldering the tsop and not many people have the confidence to do that with there consoles, Now they know people want this kind of thing and they have said they will include it in future kits.
      He also said he would think about getting adapters out to resellers on there own for those who have already purchased 1.2 but they will only be a few dollars but he isn't to sure on this yet.
      Yes I have made my own like this but if they have this how did they not know NAND 2 didn't work ?
      Did they just never test it?

      I hope it's not £11 like the y adaptor

    70. Progskeet_Release
      04-01-2013
      05:00 AM
      70

      Originally Posted by Sarah1331
      Yes I have made my own like this but if they have this how did they not know NAND 2 didn't work ?
      Did they just never test it?

      I hope it's not £11 like the y adaptor
      Not sure really.. I think they knew NAND 2 didn't work in previous winskeets but maybe they thought they got it fixed in the latest version as you can read with it, maybe they didn't try writing, I doubt it will be £11 though.
      Even if it is around that price it will be more useful than the y adapter
      But since they said they would include it in the kit for free then it cant be that expensive, the kit price would stay the same i think.

      Edit: Btw i dont think uf6667 is slating you for making this, Its just the price tag you put on it :P
      But if you say you cant get them made cheap then i wont argue with that lol, Its a solution for the time being

    71. M8nTrap
      04-01-2013
      05:11 AM
      71

      you can say to UF I paid 66€ to receive a full kit ps1.2 + 12€ for pin header and homemade mobo to seat the device, I read all documents available, i do many thing to get this working onto an NOR SPANSION "N"...

      at this time I much progress in english writing!!! more than your device can write into a "Nor chip" ,maybe i buy this crap to learn english...

      I'm not alone in this case, i'm not the best user of this device but other users are better than me on the flash tricks/skills...and they have no more results.

      why you came here with this non tested bitstream...??? do you have some ps3 in the team???

    72. sonyweb
      04-01-2013
      05:14 AM
      72

      Originally Posted by Progskeet_Release
      Well, 1.2 worked fine on NAND flash so it did work, you could read NOR it was just the writing, When 1.2 got to resellers uf6667 was under the impression it would work as intended from the start, lets not forget uf has developer progskeet boards with the right components on it so it worked fine for him, Manufacturers made alot of fkups which then led to the stream needing to be halved in size for it to work as it should with NOR flash.
      Unprofessional explanation you are giving.

    73. guerrierodipace
      04-01-2013
      05:16 AM
      73

      I bought 1.2 and still now under the dust...and will stay there.
      I am very very happy with my Teensy++. It works great and without problem with OPEN and FREE code from Judges and Effleurage.
      With full support NOR and DOUBLE NAND.
      So no need to try again new bitstream, lost of time and money.

    74. Progskeet_Release
      04-01-2013
      05:26 AM
      74

      Originally Posted by M8nTrap
      you can say to UF I paid 66€ to receive a full kit ps1.2 + 12€ for pin header and homemade mobo to seat the device, I read all documents available, i do many thing to get this working onto an NOR SPANSION "N"...

      at this time I much progress in english writing!!! more than your device can write into a "Nor chip" ,maybe i buy this crap to learn english...

      I'm not alone in this case, i'm not the best user of this device but other users are better than me on the flash tricks/skills...and they have no more results.

      why you came here with this non tested bitstream...??? do you have some ps3 in the team???
      You have spansion... this requires a much slower write process...
      Buffered write 8 bytes Slowpoke most commonly used for Spansion Spansion S29GL128P90TFIR2 and Spansion S29GL128N90TFIR2
      http://ps3devwiki.com/wiki/Talk:Hard...st_safe_method
      http://ps3devwiki.com/wiki/Talk:Hard...lained_further

      I can't test the stream untill i receive a 1.2 from uf6667, Im just posting the release :/
      Its your own fault you cant read the wiki and use slowpoke method...
      Originally Posted by sonyweb
      Unprofessional explanation you are giving.
      How is it 'unprofessional'
      uf6667 has 'DEVELOPER' boards, ofcourse the 2121 bitstream will work on them because it has the right components, if you can't understand that then you shouldn't even be flashing hardware lol
      There is a difference between the 1.2 'Dev' board and the 'Retail' 1.2 Boards :/

      Originally Posted by guerrierodipace
      I bought 1.2 and still now under the dust...and will stay there.
      I am very very happy with my Teensy++. It works great and without problem with OPEN and FREE code from Judges and Effleurage.
      With full support NOR and DOUBLE NAND.
      So no need to try again new bitstream, lost of time and money.
      K then, I own a Teensy to but whatever, Not forcing you to use Progskeet am I lol...

    75. M8nTrap
      04-01-2013
      05:34 AM
      75

      [QUOTE=Progskeet_Release;569498]You have spansion... this requires a much slower write process...
      Buffered write 8 bytes Slowpoke most commonly used for Spansion Spansion S29GL128P90TFIR2 and Spansion S29GL128N90TFIR2
      http://ps3devwiki.com/wiki/Talk:Hard...st_safe_method

      I can't test the stream untill i receive a 1.2 from uf6667, Im just posting the release :/
      Its not our fault you cant read the wiki and use slowpoke method...

      Ok! when I am more calm maybe I test that...I used all my patience in the last 5 month...

    76. baileyscream
      04-01-2013
      05:40 AM
      76

      Originally Posted by Progskeet_Release
      Your making it sound like he purposely tried to screw people over, that just isn't the case. Can't people just move on and be happy that they can actually use what they paid for, sure it took a while but why hold grudges lol.
      they knew there was a problem.


      still cannot use this for the functions that we paid for:-


      any other company would have removed the faulty item from stock then re-called all the faulty boards back in from customers.

      the 1.1 should have been re-stocked as it was the last working product.

      but no they carried on sending them to more and more re-sellers.

      they knew there were false advertising the progskeet but ignored the legality of this.

      1. it was advertised to read / write to NAND = false it only does "some" NAND

      2. it was advertised to do dual NAND = false it will not do 2 at a time.

      3 it was advertised read / write NOR = false it will only read NOR

      4 it was advertised to dual boot = false the board that 2 NANDS or a NOR will be soldered to has been said in THIS thread that it was not going to be made.

      it will be the same board that [MENTION=245343]Sarah1331[/MENTION] makes and [MENTION=192300]uf6667[/MENTION] has said he didnt think there was a need for it. well how the hell do you do the advertised dual boot with out it??

      so still miss leading its customers and false advertiseng the progskeet

      how long are they planning to abuse the legal system like this??

      and finaly when the NAND and NOR boards are made then everyone who has bought a 1.2 progskeet should recive one free off charge as we bought the 1.2 with the dual boot feature.

      these boards SHOULD have been with it in the first place. and now we have found out that parts were missing in our purchases.

      thats another illegal act!!!!!!!

    77. 3absiso
      04-01-2013
      05:42 AM
      77

      Originally Posted by M8nTrap
      Ok! when I am more calm maybe I test that...I used all my patience in the last 5 month...
      as [MENTION=269704]Progskeet_Release[/MENTION] said Spansions needs slower write speed,
      i usually use zadig as usblib0 and use older winskeet start at 64 byte if fail i go down till 8 byte.
      99% works

    78. Progskeet_Release
      04-01-2013
      05:45 AM
      78

      Originally Posted by baileyscream
      they knew there was a problem.


      still cannot use this for the functions that we paid for:-


      any other company would have removed the faulty item from stock then re-called all the faulty boards back in from customers.

      the 1.1 should have been re-stocked as it was the last working product.

      but no they carried on sending them to more and more re-sellers.

      they knew there were false advertising the progskeet but ignored the legality of this.

      1. it was advertised to read / write to NAND = false it only does "some" NAND

      2. it was advertised to do dual NAND = false it will not do 2 an a time.

      3 it was advertised read / write NOR = false it will only read NOR

      4 it was advertised to dual boot = false the board that 2 NANDS or a NOR will be soldered to has been said in THIS thread that it was not going to be made.

      it will be the same board that [MENTION=245343]Sarah1331[/MENTION] makes and [MENTION=192300]uf6667[/MENTION] has said he didnt think there was a need for it. well how the hell do you do the advertised dual boot with out it??

      so still miss leading its customers and false advertiseng the progskeet

      how long are they planning to abuse the legal system like this??
      At this comment 'well how the hell do you do the advertised dual boot with out it??'

      1.2 Supports dual nand, 1.1 was bugged on 1 side and couldn't support it thats why 1.2 was made, Its Winskeet that cant do dual nand because Nand 2 can't write back' So having this adapter board makes no difference because the Y adapter comes with the kit its just winskeet that needs fixing, you should know this since you claim to know so much.

    79. 3absiso
      04-01-2013
      05:50 AM
      79

      Originally Posted by Progskeet_Release
      At this comment 'well how the hell do you do the advertised dual boot with out it??'

      1.2 Supports dual nand, 1.1 was bugged on 1 side and couldn't support it thats why 1.2 was made, Its Winskeet that cant do dual nand because Nand 2 can't write back' So having this adapter board makes no difference because the Y adapter comes with the kit its just winskeet that needs fixing, you should know this since you claim to know so much.
      He Never claims anything, and he never said he is a developer or any thing from this kind.
      and did UF put you here to defend ProgSkeet,

    80. baileyscream
      04-01-2013
      05:56 AM
      80

      Originally Posted by Progskeet_Release
      At this comment 'well how the hell do you do the advertised dual boot with out it??'

      1.2 Supports dual nand, 1.1 was bugged on 1 side and couldn't support it thats why 1.2 was made, Its Winskeet that cant do dual nand because Nand 2 can't write back' So having this adapter board makes no difference because the Y adapter comes with the kit its just winskeet that needs fixing, you should know this since you claim to know so much.
      1st i do not "claim" anything.

      2nd thats my question. how are we supposed to do dual boot with out it??

      3rd it may be winskeet but wait thats the software that runs the progskeet... and that doesnt work. so faulty product (yes software is product when it is part of the whole)


      4th try reading my replies
      the adaptor i am talking about is not the "Y" adaptor its the board that you solder 2 NANDS to or 1 NOR to so you get dual boot.

      the boards uf6667 has said in this thread he didnt think there was a need for them.

      erm you cannot dual boot without them

    81. M8nTrap
      04-01-2013
      06:12 AM
      81

      Originally Posted by 3absiso
      as [MENTION=269704]Progskeet_Release[/MENTION] said Spansions needs slower write speed,
      i usually use zadig as usblib0 and use older winskeet start at 64 byte if fail i go down till 8 byte.
      99% works
      thank you! i've no desire to do this today... i prefer read comments today!

    82. 3absiso
      04-01-2013
      06:15 AM
      82

      Originally Posted by M8nTrap
      thank you! i've no desire to do this today... i prefer read comments today!
      This Thread is on Fire now

    83. Link2356
      04-01-2013
      06:43 AM
      83

      Reading/skimming through some of the comments is making me scared to ask "Is it safe to finally buy the progskeet 1.2 for downgrading my phat ps3 model:ceche01 on fw 4.30?"

    84. 3absiso
      04-01-2013
      06:47 AM
      84

      Originally Posted by Link2356
      Reading/skimming through some of the comments is making me scared to ask "Is it safe to finally buy the progskeet 1.2 for downgrading my phat ps3 model:ceche01 on fw 4.30?"
      Just wait till ones confirms it works on NOR, i say around a week,
      i sent my V1.2 to be phynixed by Andy

    85. Sarah1331
      04-01-2013
      06:58 AM
      85

      Originally Posted by Progskeet_Release
      At this comment 'well how the hell do you do the advertised dual boot with out it??'

      1.2 Supports dual nand, 1.1 was bugged on 1 side and couldn't support it thats why 1.2 was made, Its Winskeet that cant do dual nand because Nand 2 can't write back' So having this adapter board makes no difference because the Y adapter comes with the kit its just winskeet that needs fixing, you should know this since you claim to know so much.
      Only bugged when on solder less bit stream and using adaptor board might I add

    86. haz367
      04-01-2013
      06:59 AM
      86

      edit...nvm.......its all good

    87. Sarah1331
      04-02-2013
      04:38 AM
      87

      Anyone confirm it works???

      And the "issue" is fixed

    88. sonyweb
      04-02-2013
      05:13 AM
      88

      Originally Posted by Sarah1331
      Anyone confirm it works???

      And the "issue" is fixed
      I see how everyone is anxious.Its like this thread went into a paused state for sometime.
      Anyway, I will try one of my ps v1.2 on a nor machine in a short time(3hrs roughly).

    89. Sarah1331
      04-02-2013
      05:14 AM
      89

      Originally Posted by sonyweb
      I see how everyone is anxious.Its like this thread went into a paused state for sometime.
      Anyway, I will try one of my ps v1.2 on a nor machine in a short time(3hrs roughly).
      Thank you ...

    90. Progskeet_Release
      04-02-2013
      06:12 AM
      90

      uf6667 is posting me a 1.2 today so i should be able to try this out soon, Thats if he remembers :P

    91. Sarah1331
      04-02-2013
      06:15 AM
      91

      You said it was a developer board so it's going to work try getting a retail one

      For free obviously you don't seem to have paid for much so far

    92. Progskeet_Release
      04-02-2013
      06:24 AM
      92

      Originally Posted by Sarah1331
      You said it was a developer board so it's going to work try getting a retail one

      For free obviously you don't seem to have paid for much so far
      I'll be using the retail bitstream though, not the developer stream which is what he uses.
      I've paid for 2 1.0s a 1.1 and I have a 1.21 on order
      uf offered it to me for free.. i didn't ask, would be rude to say noo

    93. Sarah1331
      04-02-2013
      06:28 AM
      93

      Originally Posted by Progskeet_Release
      I'll be using the retail bitstream though, not the developer stream.
      I've paid for 2 1.0s a 1.1 and I have a 1.21 on order
      uf offered it to me for free.. i didn't ask, would be rude to say noo
      So you have two of every skeet as you say in another post he gave you all the others also

      Me smell some cow poo somewhere

      And no I wouldn't turn a freebe down maybe he should offer everyone who purchased a skeet 1.2 something free all that said its them who paid for your feebe

    94. KopKaasDamp
      04-02-2013
      06:38 AM
      94

      I have the 1.21 version but this piece of junk won't install me the usb driver today, yesterday i got it installed in 2 facking hours and testing one dump from nand top, today the drivers are gone en won't recognized it anymore.
      I want my money back.

    95. Progskeet_Release
      04-02-2013
      06:41 AM
      95

      Originally Posted by Sarah1331
      So you have two of every skeet as you say in another post he gave you all the others also

      Me smell some cow poo somewhere

      And no I wouldn't turn a freebe down maybe he should offer everyone who purchased a skeet 1.2 something free all that said its them who paid for your feebe
      Uhh what.. where did I say I have 2 of every skeet and that uf gave them all to me lol... and if i did say that I must have been stoned at the time xS The only one he is giving me is the 1.2 Dev board which I don't have yet
      You said I havn't paid for much when I have, I've spent over £100 on Progskeets.
      Its 'them' who paid for my freebie? These dev boards were made and paid for with uf's own money before Retail 1.2s went into production lol :/
      ************* [ - Post Merged - ] *************
      Originally Posted by KopKaasDamp
      I have the 1.21 version but this piece of junk won't install me the usb driver today, yesterday i got it installed in 2 facking hours and testing one dump from nand top, today the drivers are gone en won't recognized it anymore.
      I want my money back.
      It is not the Progskeet, Uninstall the device completely and install drivers manually and make sure your using 32bit OS.

    96. Sarah1331
      04-02-2013
      06:51 AM
      96

      Originally Posted by Progskeet_Release
      Its 'them' who paid for my freebie? These dev boards were made and paid for with uf's own money before Retail 1.2s went into production lol :/
      Oh sorry I didn't know uf paid out of his own pocket

      Am guessing any previous progskeet he donated the money and never made a penny

    97. baileyscream
      04-02-2013
      06:56 AM
      97

      [MENTION=269704]Progskeet_Release[/MENTION]
      how young are you?
      you really have no idea how a business is run do you?

      the price of the dev boards are taken out of the business. its "costs"

      dev & prototype boards are absorbed into the business. 1 member of that business doesnt pay for it from his own pocket

      and the business is paid for by customers


      and a business as big as squirt will have plenty of money from its customers

    98. Sarah1331
      04-02-2013
      07:08 AM
      98

      Originally Posted by baileyscream
      [MENTION=269704]Progskeet_Release[/MENTION]
      how young are you?
      you really have no idea how a business is run do you?

      the price of the dev boards are taken out of the business. its "costs"

      dev & prototype boards are absorbed into the business. 1 member of that business doesnt pay for it from his own pocket

      and the business is paid for by customers


      and a business as big as squirt will have plenty of money from its customers
      Ahhhh now I see progskeet is squirt answered loads of questions

      And it's the users that suck the blood from the scene??? Go get stoned kid

    99. Progskeet_Release
      04-02-2013
      07:24 AM
      99

      Originally Posted by baileyscream
      [MENTION=269704]Progskeet_Release[/MENTION]
      how young are you?
      you really have no idea how a business is run do you?

      the price of the dev boards are taken out of the business. its "costs"

      dev & prototype boards are absorbed into the business. 1 member of that business doesnt pay for it from his own pocket

      and the business is paid for by customers


      and a business as big as squirt will have plenty of money from its customers
      What i mean is the dev boards are obviously made before the retail boards, These had to be paid for, whether uf pays it or not is irrelevant.
      Sarah said I'm getting a freebie that was paid for by progskeet users when thats not the case at all, your trying to make me out to be a leech just because I didnt pay for a 1.2...
      Whats wrong with him giving me a free dev board ;s
      I don't care how buisness works, it doesn't interest me.

    100. Sarah1331
      04-02-2013
      07:28 AM
      100

      Originally Posted by Progskeet_Release
      What i mean is the dev boards are obviously made before the retail boards, These had to be paid for, whether uf pays it or not is irrelevant.
      Sarah said I'm getting a freebie that was paid for by progskeet users when thats not the case at all, your trying to make me out to be a leech just because I didnt pay for a 1.2...
      Whats wrong with him giving me a free dev board ;s
      I don't care how buisness works, it doesn't interest me.
      Nothing wrong with getting something for free but customers are paying in the end surly you see that

    101. Progskeet_Release
      04-02-2013
      07:40 AM
      101

      Originally Posted by Sarah1331
      Nothing wrong with getting something for free but customers are paying in the end surly you see that
      Yes I know what you mean and i would understand peoples frustation if he was giving me retail boards for free, but these are dev boards and he has the right to give them out for free to whoever he pleases lol.

    102. M8nTrap
      04-02-2013
      07:54 AM
      102

      Originally Posted by Progskeet_Release
      It is not the Progskeet, Uninstall the device completely and install drivers manually and make sure your using 32bit OS.
      when you buy the device, nobody mention nowhere than 32 bit OS is the only one compatible!!!... and I already hear this, only onto forums, but I never see this on the advertisings...

      If this is real,,, i can do nothing more with this crap, a really bad buying!

    103. baileyscream
      04-02-2013
      08:02 AM
      103

      Originally Posted by Sarah1331
      Ahhhh now I see progskeet is squirt answered loads of questions
      that wasnt common knowladge? woops
      ************* [ - Post Merged - ] *************
      Originally Posted by Progskeet_Release
      I don't care how buisness works, it doesn't interest me.
      that right there sums up the attitude in this thread and there threads on there "support" site
      (thats the thread not the site its self)

    104. KopKaasDamp
      04-02-2013
      08:08 AM
      104

      Originally Posted by M8nTrap
      when you buy the device, nobody mention nowhere than 32 bit OS is the only one compatible!!!... and I already hear this, only onto forums, but I never see this on the advertisings...
      First i was on w7x64, it won't work, then i formatted my second drive and installed xp home 32bit on it, after more then 2 hours frustrations the progskeet recognized the driver.
      Today after 3 hours totally nothing, the driver installation is gone and won't take it anymore, restart my pc etc. checked the connectors, another usb port, 3.3v on/off(atx power). Only the injectus works.
      I am done with it.

    105. 4DoorITR
      04-02-2013
      08:17 AM
      105

      What an epic f'ing mess.

    106. sonyweb
      04-02-2013
      08:19 AM
      106

      Originally Posted by Sarah1331
      Thank you ...
      [MENTION=245343]Sarah1331[/MENTION]

      Finished wiring the nor 'Samsung K8Q', and I can tell u this bitstream isn't working.Dumping CFI is invalid and the progskeet is not able to give a good dump.Whereas with the older bitstream u can get a good dump but cannot flash as usual.

      If u check Dayton360mods downloads section there is another bitstream up.

      Sure they never test the bit steams before releasing.

    107. 3absiso
      04-02-2013
      08:20 AM
      107

      Originally Posted by baileyscream
      that wasnt common knowladge? woops
      that right there sums up the attitude in this thread and there threads on there "support" site
      (thats the thread not the site its self)

      i really did not know that ProgSkeet are the same are squirt but lately

    108. M8nTrap
      04-02-2013
      08:20 AM
      108

      frustrations is the good word! it is often used...when speaking about ps1.2

    109. Sarah1331
      04-02-2013
      08:28 AM
      109

      Originally Posted by 3absiso

      i really did not know that ProgSkeet are the same are squirt but lately
      I like squirt for leaking rgh2 and xecuter said its not ready to say they haven't done **** all with rgh 2 it would have never been realeased

      But I hope the bitstream works so they can concentrate on there plan to put me out of my adaptor buisness lol

    110. ModderFokker619
      04-02-2013
      08:44 AM
      110

      What a joke this has been,sadly it's been on us who bought it. They certainly cashed in on last years holiday sales. Bailey and news on updating the guide with Teensy nand?

    111. baileyscream
      04-02-2013
      08:44 AM
      111

      Originally Posted by sonyweb
      [MENTION=245343]Sarah1331[/MENTION]

      Finished wiring the nor 'Samsung K8Q', and I can tell u this bitstream isn't working.Dumping CFI is invalid and the progskeet is not able to give a good dump.Whereas with the older bitstream u can get a good dump but cannot flash as usual.

      If u check Dayton360mods downloads section there is another bitstream up.

      Sure they never test the bit steams before releasing.
      while its still wired up can you put the old bitstream back on and see if it still gives a good dump.

      then we can tell if it is the bitstream or something else in this case

    112. Progskeet_Release
      04-02-2013
      08:45 AM
      112

      Originally Posted by baileyscream


      that right there sums up the attitude in this thread and there threads on there "support" site
      (thats the thread not the site its self)
      My attitude has nothing to do with Progskeet, I don't know if you have noticed but I have said I'm not uf6667, I'm not a part of the Progskeet team so why should i care how buisness works? If i did i would have done buisness studies at college, Im just another End-user :/
      uf came to me in the irc and said release it for him so I did, now i'm being slated because apparently it doesn't work and because i'm getting a free progskeet :s

    113. baileyscream
      04-02-2013
      08:46 AM
      113

      Originally Posted by ModderFokker619
      What a joke this has been,sadly it's been on us who bought it. They certainly cashed in on last years holiday sales. Bailey and news on updating the guide with Teensy nand?
      its comming this ps3 is in a bad way so its slow progress.

    114. Progskeet_Release
      04-02-2013
      08:48 AM
      114

      There is info on devwiki for Teensy Nand, Its not hard to follow lol

    115. baileyscream
      04-02-2013
      08:53 AM
      115

      Originally Posted by Progskeet_Release
      My attitude has nothing to do with Progskeet, I don't know if you have noticed but I have said I'm not uf6667, I'm not a part of the Progskeet team so why should i care how buisness works? If i did i would have done buisness studies at college.
      hmm putting words into my mouth there.

      i didnt say you are uf6667

      i said what you said sums up the attitude here

      how does that translate to you being uf6667?

      you are comming in and replying as a "spokes person" by using this user name.

      you got the "spokes person" title the moment you reliesed this and created this thread using this user name.

      really you should have posted the news then logged in with a different name.

      instead you hung around and engaged in this thread with an attitude that appears as if your trying to build up a flame thread.

    116. 3absiso
      04-02-2013
      08:59 AM
      116

      Originally Posted by Progskeet_Release
      Im just another End-user :/

      And what we are clowns in the circus.
      as for an end user you are treated with special treat. have no issue with out.
      but what about the rest off end users?

    117. ModderFokker619
      04-02-2013
      09:00 AM
      117

      Originally Posted by Progskeet_Release
      There is info on devwiki for Teensy Nand, Its not hard to follow lol

      Who said it was hard to follow...? lol

      I've been following the guides here as they are laid out better and straight forward. Plus comments and feed back can help each other out.

      SquirtSquirt

    118. Progskeet_Release
      04-02-2013
      09:04 AM
      118

      Originally Posted by baileyscream
      hmm putting words into my mouth there.

      i didnt say you are uf6667

      i said what you said sums up the attitude here

      how does that translate to you being uf6667?

      you are comming in and replying as a "spokes person" by using this user name.

      you got the "spokes person" title the moment you reliesed this and created this thread using this user name.

      really you should have posted the news then logged in with a different name.

      instead you hung around and engaged in this thread with an attitude that appears as if your trying to build up a flame thread.
      The people flaming me is sarah, you and the people who can't get the stream to work.. I stuck around to forward the feedback on to uf, like he asked me to :/
      Why would i make another user, isn't having multiple accounts against forum rules? ;s
      I never said you thought i was uf, i simply said 'If you havn't noticed im not uf6667' just to clear things up and have no part in progskeets team.

    119. Sarah1331
      04-02-2013
      09:17 AM
      119

      You are uf's ***** if he asked you to do this and he give end user free progskeet yea whatever

      Not surprised if you are uf or part of the team in some way

      Ill not am not bothered if it works or not my Phoenix II and my prototype adaptor downgrades consoles in 30 mins lol

      I feel for all the people you scammed selling the 1.2 sorry not you your the end user...

    120. sonyweb
      04-02-2013
      09:22 AM
      120

      Originally Posted by baileyscream
      while its still wired up can you put the old bitstream back on and see if it still gives a good dump.

      then we can tell if it is the bitstream or something else in this case
      I did exactly that,because it is the only way to eliminate any guess work.

    121. baileyscream
      04-02-2013
      09:35 AM
      121

      Originally Posted by Progskeet_Release
      The people flaming me is sarah, you and the people who can't get the stream to work.. I stuck around to forward the feedback on to uf, like he asked me to :/
      Why would i make another user, isn't having multiple accounts against forum rules? ;s
      I never said you thought i was uf, i simply said 'If you havn't noticed im not uf6667' just to clear things up and have no part in progskeets team.
      there are situations like leaking stuff or using a joint account to reliese a teams info / tools.

      and sticking around is 1 thing and enjoying getting peoples backs up is another.

      and why mention uf6667 then? i didnt so i see no need to have mentioned him.

      personaly i think the guy is great

      he stuck around trying to get this working when the rest of the team had there falling out and left

      uf667 even carried on over xmas / new year then finaly the rest of the team got back together.

      so uf6667 has alot of respect from me for that.

      but it is the team as a whole that have created this mess

      they knew about it and decided to argue amongst them selves and ditch the end user

      now there back and we should all bow down and give thanks for "sort of" fixing this

      oh and for planning on selling addon cards that will let the 1.2 dual boot even though the 1.2 is advertised as doing so and with that then we really should be getting them sent out to us as they were missing from the "kit"

    122. Progskeet_Release
      04-02-2013
      09:52 AM
      122

      Originally Posted by Sarah1331
      You are uf's ***** if he asked you to do this and he give end user free progskeet yea whatever

      Not surprised if you are uf or part of the team in some way

      Ill not am not bothered if it works or not my Phoenix II and my prototype adaptor downgrades consoles in 30 mins lol

      I feel for all the people you scammed selling the 1.2 sorry not you your the end user...
      I appreciate the devices progskeet has provided, Thats why i'm getting a free dev board, Show your appreciation and he might just do the same but you dont seem to appreciate any Progskeet since you just sh'it on the company.
      Maybe the team just hasn't had the time to sort out all the issues, he did say there was problems amongst them and he had alot of exams etc, I don't even know whos top of the chain within the team and who decides what.

      I'm his bit'ch for releasing a bitstream? So does that make everyone who posts releases the Authors bit'ch?
      Why say I'm a scammer in the post when you know i'm an end user and then say 'sorry not you your the end user...' Like you couldn't just simply delete the scammer part lol, thats just a shallow move :/

    123. Sarah1331
      04-02-2013
      10:01 AM
      123

      Originally Posted by Progskeet_Release
      I appreciate the devices progskeet has provided, Thats why i'm getting a free dev board, Show your appreciation and he might just do the same but you dont seem to appreciate any Progskeet since you just sh'it on the company.
      Maybe the team just hasn't had the time to sort out all the issues, he did say there was problems amongst them and he had alot of exams etc, I don't even know whos top of the chain within the team and who decides what.

      I'm his bit'ch for releasing a bitstream? So does that make everyone who posts releases the Authors bit'ch?
      Why say I'm a scammer in the post when you know i'm an end user and then say 'sorry not you your the end user...' Like you couldn't just simply delete the scammer part lol, thats just a shallow move :/
      Oh I love the progskeet look at my previous 1000 posts 60-70% will say get a progskeet

      There's not a progskeet 1.1 fanboy bigger than me can I have a free one now

      Your team is the scammers sorry not your team your just the end user

      Ps don't take it personal am just saying everything every 1.2 customer is thinking

    124. beatdowniidx
      04-02-2013
      10:22 AM
      124

      i feel like a sucker for buying the damn thing because i cant buy the nand clips anywhere and dont have the skill to solder to the legs.

      but whats strange i got the drivers installed on to my 64bit win7 home premium

    125. ModderFokker619
      04-02-2013
      10:26 AM
      125

      I haven't had an issue installing drivers on any 7 x64. Oddly enough I was getting nand read errors (Freezing) on xp x32

      So far one member saying new bitstream is a no go. Do I really want to wire this **** up again for it not to work? Thankfully one of my customers gave me a Prog 1.0 and have a teeny for backup. If I get some time today I will try this nor I have here at the shop.

    126. KopKaasDamp
      04-02-2013
      10:32 AM
      126

      Originally Posted by beatdowniidx
      i feel like a sucker for buying the damn thing because i cant buy the nand clips anywhere and dont have the skill to solder to the legs.

      but whats strange i got the drivers installed on to my 64bit win7 home premium
      Here i got the 360 nand clip.
      http://www.chipspain.com/product_inf...oducts_id=7106

    127. Progskeet_Release
      04-02-2013
      10:39 AM
      127

      Originally Posted by beatdowniidx
      i feel like a sucker for buying the damn thing because i cant buy the nand clips anywhere and dont have the skill to solder to the legs.

      but whats strange i got the drivers installed on to my 64bit win7 home premium
      Why are you a sucker for buying it lol?
      The clips arn't made by progskeet if you didn't know :P

    128. GregoryRasputin
      04-02-2013
      10:50 AM
      128

      [MENTION=269704]Progskeet_Release[/MENTION] how would you feel if i just decided to ban you for no reason and abuse your account ?

    129. haz367
      04-02-2013
      10:52 AM
      129

      PLEASE CAN ANYONE CONFIRM THIS...yeah i'm shouting a little...sorry for it


      the problem is i got nobody here to confirm, i found it weird that the Progskeet 1.2 when program any bitstream to it...when it erases it always show's FF's = no data?

      as when u check the Progskeet 1.2 PDF u can see in the images that it always contain other values, as also is the case with my
      Progskeet 1.0, never seen the FF/00's there below the ACTEL_SLOG_UROW




      anyone, can u confirm this, for example the latest bitstream programmed to it:

      ProgSkeet_12_130401_1824

      color=red]what should be shown when u click "Device info"?[/color]

      and after programming with Injectus, once complete, the blue led + blinking yellow/red, normal?



      Erase...

      ACTEL_SLOG_UROW =
      FF FF FF FF FF FF FF FF FF FF FF FF FF 00 FF FF

      Programming UROW...

      Programming FPGA Array...
      .
      .
      .
      .

      .
      .

      Verifying FPGA Array...
      .

      .
      .
      .
      .

      Programming Rlock...

      Programming SILSIG...


      Device info after programming

      ACTEL_SLOG_UROW =
      FF FF FF FF FF FF FF FF FF FF FF FF FF 00 FF FF

      User information:
      CYCLE COUNT: 00000003

      CHECKSUM =
      FF FF

      Design Name =
      FF FF FF FF FF FF FF FF FF

      ==================================================
      FSN: 03d4ebb0

      Security Setting :

      FlashROM Read protected by pass key.

      Encrypted FlashROM Programming Enabled.

      Encrypted FPGA Array Programming Enabled.
      thx!

    130. Progskeet_Release
      04-02-2013
      11:01 AM
      130

      Originally Posted by GregoryRasputin
      [MENTION=269704]Progskeet_Release[/MENTION] how would you feel if i just decided to ban you for no reason and abuse your account ?
      And what have I done to deserve that lol, And if you did do that then your a bad moderator :/

    131. GregoryRasputin
      04-02-2013
      11:06 AM
      131

      Originally Posted by Progskeet_Release
      And what have I done to deserve that lol, And if you did do that then your a bad moderator :/
      Well you haven't done anything to deserve that and yes that would make me a bad moderator, but:

      The people that invested in Progskeet, didn't deserve the problems with the device and the lack of support and help, or the abuse they received when asking for help.

      So if banning you would make me a bad moderator, what does it make the people involved in Progskeet for their absence in help and not acknowledging their device was faulty or apologising.

      End users who invested money in buying a device that didn't work as it should, are entitled to be p*ssed of, they are entitled to voice their distaste and annoyance.

      Also all these excuses about college and such are lame excuses, when you deal with people and profit from them, you should then work to see your product works successfully.

    132. Progskeet_Release
      04-02-2013
      11:13 AM
      132

      Originally Posted by GregoryRasputin
      Well you haven't done anything to deserve that and yes that would make me a bad moderator, but:

      The people that invested in Progskeet, didn't deserve the problems with the device and the lack of support and help, or the abuse they received when asking for help.
      I have seen no abuse towards anyone asking for help in #progskeet-support
      In #ps3downgrade yes, they do.. but thats not where people should be asking for Progskeet help
      So where has this abuse talk come from ;s
      I've never seen uf, bmx or any dev thats involved abuse someone because they needed help ;s

    133. baileyscream
      04-02-2013
      11:19 AM
      133

      BITSTREEM UPDATE

      it was updated yesterday but the first post here still has the old one

      ProgSkeet 1.2/1.21 BITSTREAM_12_130401_1824


      source
      http://forum.dayton360mods.com/showt...=2850#post2850

    134. Progskeet_Release
      04-02-2013
      11:24 AM
      134

      Originally Posted by baileyscream
      BITSTREEM UPDATE

      it was updated yesterday but the first post here still has the old one

      ProgSkeet 1.2/1.21 BITSTREAM_12_130401_1824


      source
      http://forum.dayton360mods.com/showt...=2850#post2850
      Will update 1st post

    135. GregoryRasputin
      04-02-2013
      11:30 AM
      135

      Originally Posted by Progskeet_Release
      I have seen no abuse towards anyone asking for help in #progskeet-support
      In #ps3downgrade yes, they do.. but thats not where people should be asking for Progskeet help
      So where has this abuse talk come from ;s
      I've never seen uf, bmx or any dev thats involved abuse someone because they needed help ;s
      I would call banning people from the forum asking for help, abuse.

      I would call not sorting the problem out sooner, abuse.

      I would call selling people faulty device, abuse.

      I could go on and on and on, but i think it will be pointless where you are concerned.

    136. baileyscream
      04-02-2013
      11:32 AM
      136

      Originally Posted by haz367
      PLEASE CAN ANYONE CONFIRM THIS...yeah i'm shouting a little...sorry for it


      the problem is i got nobody here to confirm, i found it weird that the Progskeet 1.2 when program any bitstream to it...when it erases it always show's FF's = no data?

      as when u check the Progskeet 1.2 PDF u can see in the images that it always contain other values, as also is the case with my
      Progskeet 1.0, never seen the FF/00's there below the ACTEL_SLOG_UROW




      anyone, can u confirm this, for example the latest bitstream programmed to it:

      ProgSkeet_12_130401_1824

      color=red]what should be shown when u click "Device info"?[/color]

      and after programming with Injectus, once complete, the blue led + blinking yellow/red, normal?





      thx!
      what is the out put if you update the previous bitstream?

      is it the same?
      ************* [ - Post Merged - ] *************
      Originally Posted by Progskeet_Release
      I have seen no abuse towards anyone asking for help in #progskeet-support
      In #ps3downgrade yes, they do.. but thats not where people should be asking for Progskeet help
      So where has this abuse talk come from ;s
      I've never seen uf, bmx or any dev thats involved abuse someone because they needed help ;s
      your missing progskeet's "support" forum

      where progskeet ignore its customers.

      juggerhaxor and myself have been trying to give support in there threads for months now

      yet we are not part of progskeet

      the mods that are part of progskeet never say a word in there. so silence is also abuse!

    137. haz367
      04-02-2013
      11:47 AM
      137

      ....................................

    138. baileyscream
      04-02-2013
      11:55 AM
      138

      [MENTION=138171]haz367[/MENTION]
      what version of windows are you running
      is it 32 or 64 bit also

    139. haz367
      04-02-2013
      11:57 AM
      139

      win7 32bit
      progskeet 1.0 is with values like it should right..each bitstream different data? atleast FF's are weird..each bitstream..

    140. baileyscream
      04-02-2013
      01:00 PM
      140

      Originally Posted by haz367
      win7 32bit
      progskeet 1.0 is with values like it should right..each bitstream different data? atleast FF's are weird..each bitstream..
      i have seen the FF FF FF before. i think its to do with the injectus not the bitstream.
      or atleast how the injectus is reading the bitstream data

      as far as i can tell it still transfers the bitstream over to the Actel chip just fine.
      but without the infectus group being active then i dont think there will be an answer to what the FF FF FF etc actually means (that is assuming ProgSkeet > squirt isnt infectus aswell )

      so just to clarify

      your on win7 32bit (home / starter / pro ??)

      using both bitstreams works?

      using both winsub & libsub works?

      you can dump CFI on all the above?

      you can dump NOR on all the above?

    141. haz367
      04-02-2013
      01:35 PM
      141

      nvm...............................

    142. baileyscream
      04-02-2013
      03:17 PM
      142

      BITSTREEM UPDATE

      another updated bitstream

      ProgSkeet 1.2/1.21 BITSTREAM_12_120402_1730


      source
      http://forum.dayton360mods.com/showt...=2850#post2850

      [MENTION=269704]Progskeet_Release[/MENTION]
      how is it that your really pally with uf6667 and he has you watching this thread to report issues that he doesnt give you the links for fixes?

    143. guerrierodipace
      04-02-2013
      04:01 PM
      143

      Originally Posted by baileyscream
      BITSTREEM UPDATE

      another updated bitstream

      ProgSkeet 1.2/1.21 BITSTREAM_12_120402_1730


      source
      http://forum.dayton360mods.com/showt...=2850#post2850

      [MENTION=269704]Progskeet_Release[/MENTION]
      how is it that your really pally with uf6667 and he has you watching this thread to report issues that he doesnt give you the links for fixes?
      LOL daily updates

      2 LOL is dated 2012

    144. sonyweb
      04-02-2013
      04:05 PM
      144

      Originally Posted by baileyscream
      BITSTREEM UPDATE

      another updated bitstream

      ProgSkeet 1.2/1.21 BITSTREAM_12_120402_1730


      source
      http://forum.dayton360mods.com/showt...=2850#post2850

      [MENTION=269704]Progskeet_Release[/MENTION]
      how is it that your really pally with uf6667 and he has you watching this thread to report issues that he doesnt give you the links for fixes?

      Thats 3 fixes released so far.Will try this last one soon.

    145. Sarah1331
      04-02-2013
      04:06 PM
      145

      So is it working ???


      Sent from my iPad using Tapatalk HD

    146. Progskeet_Release
      04-02-2013
      04:12 PM
      146

      Originally Posted by baileyscream
      BITSTREEM UPDATE

      another updated bitstream

      ProgSkeet 1.2/1.21 BITSTREAM_12_120402_1730


      source
      http://forum.dayton360mods.com/showt...=2850#post2850

      [MENTION=269704]Progskeet_Release[/MENTION]
      how is it that your really pally with uf6667 and he has you watching this thread to report issues that he doesnt give you the links for fixes?
      I havn't been on IRC today, I do have a social life...
      And you seem to have it covered, so I'll relax
      He doesn't have me watching this thread, he asked me to post the release of the 1st 1.2 fix and I said I'd tell him about any problems with the stream.

    147. baileyscream
      04-02-2013
      04:28 PM
      147

      Originally Posted by Progskeet_Release
      I havn't been on IRC today, I do have a social life...
      And you seem to have it covered, so I'll relax
      He doesn't have me watching this thread, he asked me to post the release of the 1st 1.2 fix and I said I'd tell him about any problems with the stream.
      a social life ... whats that?

      i spend all my time in p/m's and threads trying to help people with problems with the progskeet

      hell i have even been made mod on daytona now due to the support i give and the prog dev's not covering there "support" site.

      and my poor ps3 is just covered in dust due to it not being turned on for atleast 6 months.

      but yea dont worry i have it covered. you go play some more cake mania
      ************* [ - Post Merged - ] *************
      Originally Posted by sonyweb
      Thats 3 fixes released so far.Will try this last one soon.
      actually there are 4 public releases

      just 3 have active links

      ProgSkeet_12_130402_1730.dat

      + Added metastability to the DQ ports to filter out noise and glitches

      ProgSkeet_12_130401_2010.dat

      + Reduced timeout from 1.3ms down to 320ns per word

      ProgSkeet_12_130401_1824.dat

      + Added timeout for reads/writes (1ms), no more blocking

      + Fixed bug where it would read gpio from data pins rather than from gpio pins

      ProgSkeet_12_130330_1909.dat

      + Increased metastability of USB (should no longer disconnect)

      + Restored Samsung Q compatibility that was caused by dualboot pin allocation
      SOURCE

    148. Progskeet_Release
      04-02-2013
      04:36 PM
      148

      Originally Posted by baileyscream
      a social life ... whats that?

      i spend all my time in p/m's and threads trying to help people with problems with the progskeet

      hell i have even been made mod on daytona now due to the support i give and the prog dev's not covering there "support" site.

      and my poor ps3 is just covered in dust due to it not being turned on for atleast 6 months.

      but yea dont worry i have it covered. you go play some more cake mania
      You sound really proud of yourself


    149. Sarah1331
      04-02-2013
      04:46 PM
      149

      Originally Posted by Progskeet_Release
      You sound really proud of yourself


      Lol the laugh is on you or sorry your just end user...

    150. baileyscream
      04-02-2013
      04:56 PM
      150

      Originally Posted by Progskeet_Release
      You sound really proud of yourself


      why yes i am

      i remember just how hard it was getting help when i first came over to ps3 from wii (and psp / ps2 before that)

      i am proud that the users in this comunity can get friendly / helpfull and easy to understand help when they need it.

      not just links to what looks like math lessons or to threads that were not really linked to the actual problem that was asked.

      so yes i do get a buzz from helping others and more of a buzz when i see the ppl i have helped in the past doing the same
      ie
      [MENTION=245343]Sarah1331[/MENTION]
      [MENTION=207545]3absiso[/MENTION]
      [MENTION=204330]MJ999[/MENTION]
      [MENTION=236713]donkey-punch[/MENTION]

      to name a few

      and i feel proud towards them that have helped me

      ie
      [MENTION=223376]master737373[/MENTION]
      [MENTION=191587]gDrive[/MENTION]
      [MENTION=7773]GregoryRasputin[/MENTION]
      [MENTION=7151]Pockets69[/MENTION]
      [MENTION=1]Pirate[/MENTION]
      [MENTION=114939]BwE[/MENTION]


      and again to name just a few
      ************* [ - Post Merged - ] *************
      Originally Posted by haz367
      nvm...............................
      can you undo the edit on this post haz
      it was good info that you posted.

    151. Sarah1331
      04-02-2013
      05:16 PM
      151

      Originally Posted by baileyscream
      why yes i am

      i remember just how hard it was getting help when i first came over to ps3 from wii (and psp / ps2 before that)

      i am proud that the users in this comunity can get friendly / helpfull and easy to understand help when they need it.

      not just links to what looks like math lessons or to threads that were not really linked to the actual problem that was asked.

      so yes i do get a buzz from helping others and more of a buzz when i see the ppl i have helped in the past doing the same
      ie
      [MENTION=245343]Sarah1331[/MENTION]
      [MENTION=207545]3absiso[/MENTION]
      [MENTION=204330]MJ999[/MENTION]
      [MENTION=236713]donkey-punch[/MENTION]

      to name a few

      and i feel proud towards them that have helped me

      ie
      [MENTION=223376]master737373[/MENTION]
      [MENTION=191587]gDrive[/MENTION]
      [MENTION=7773]GregoryRasputin[/MENTION]
      [MENTION=7151]Pockets69[/MENTION]
      [MENTION=1]Pirate[/MENTION]
      [MENTION=114939]BwE[/MENTION]


      and again to name just a few
      ************* [ - Post Merged - ] *************


      can you undo the edit on this post haz
      it was good info that you posted.
      Helped spoon feed me when I came to ps3

      Thank you Scott for your time you helped even when you was busy

    152. 3absiso
      04-02-2013
      06:34 PM
      152

      Originally Posted by baileyscream
      why yes i am

      i remember just how hard it was getting help when i first came over to ps3 from wii (and psp / ps2 before that)

      i am proud that the users in this comunity can get friendly / helpfull and easy to understand help when they need it.

      not just links to what looks like math lessons or to threads that were not really linked to the actual problem that was asked.

      so yes i do get a buzz from helping others and more of a buzz when i see the ppl i have helped in the past doing the same
      ie
      Sarah1331
      3absiso
      MJ999
      donkey-punch

      to name a few

      and i feel proud towards them that have helped me

      ie
      master737373
      gDrive
      GregoryRasputin
      Pockets69
      Pirate
      BwE
      and again to name just a few
      You earned it my Dear Friend, We are all proud of you for what you did and still do.
      Thank you so much for the support you gave and still.

    153. BwE
      04-02-2013
      08:53 PM
      153

      i get a buzz from my morning oats

    154. zim804
      04-03-2013
      03:13 AM
      154

      pfft mine still can't even be seen by the injectus. I just get F's. Waste of money, but nothing else does NAND.

    155. k_shake
      04-03-2013
      03:22 AM
      155

      Originally Posted by baileyscream
      why yes i am

      i remember just how hard it was getting help when i first came over to ps3 from wii (and psp / ps2 before that)

      i am proud that the users in this comunity can get friendly / helpfull and easy to understand help when they need it.

      not just links to what looks like math lessons or to threads that were not really linked to the actual problem that was asked.

      so yes i do get a buzz from helping others and more of a buzz when i see the ppl i have helped in the past doing the same
      ie
      [MENTION=245343]Sarah1331[/MENTION]
      [MENTION=207545]3absiso[/MENTION]
      [MENTION=204330]MJ999[/MENTION]
      [MENTION=236713]donkey-punch[/MENTION]

      to name a few

      and i feel proud towards them that have helped me

      ie
      [MENTION=223376]master737373[/MENTION]
      [MENTION=191587]gDrive[/MENTION]
      [MENTION=7773]GregoryRasputin[/MENTION]
      [MENTION=7151]Pockets69[/MENTION]
      [MENTION=1]Pirate[/MENTION]
      [MENTION=114939]BwE[/MENTION]


      and again to name just a few
      ************* [ - Post Merged - ] *************


      can you undo the edit on this post haz
      it was good info that you posted.
      thanks for the help. Often without even communicate in the same language, have been a huge help. Without you this would not be possible. THANK YOU.

      It's not like the staff progskeet I spent my money on junk (1.2), and no one helps me.

      sorry for bad english but had this to say.

    156. guerrierodipace
      04-03-2013
      03:25 AM
      156

      Originally Posted by zim804
      pfft mine still can't even be seen by the injectus. I just get F's. Waste of money, but nothing else does NAND.
      NANDWay + Teensy++ does NAND !!!

    157. Sarah1331
      04-03-2013
      04:06 AM
      157

      My adaptor is price reduced and another adaptor coming shortly I bet you sell for same considering you sell your y adaptor for as much lol

    158. baileyscream
      04-03-2013
      06:09 AM
      158

      Originally Posted by zim804
      pfft mine still can't even be seen by the injectus. I just get F's. Waste of money, but nothing else does NAND.
      TEENSY++2.0 does NAND with NANDway

      but first can you post a full report

      what operating system do you have

      and 32x / 64x

      what bitstream are you trying

      do you have desktop or laptop pc
      (laptop is it plugged in to charger)

      did injectus work?

      did you see any fail n the injectus program while it was loading the bitstream?

    159. k_shake
      04-03-2013
      07:30 AM
      159

      appears to me too... FF FF FF 00 FF

      Code:
      ActID = 02a121cf
      ExpID = 03a121cf
      Initializing Target Device...
      Setting BSR Configurations...
      Reading Security...
      SILSIG: 
      E5 B1 00 0B 
      ACTEL_SLOG_UROW = 
      FF FF FF FF FF FF FF FF FF FF FF FF FF 00 FF FF 
      User information: 
      CYCLE COUNT: 00000003
      CHECKSUM = 
      FF FF 
      Design Name = 
      FF FF FF FF FF FF FF FF FF 
      ==================================================
      FSN: 050957d0
      Security Setting : 
      FlashROM Read protected by pass key.
      Encrypted FlashROM Programming Enabled.
      Encrypted FPGA Array Programming Enabled.
      ==================================================
      Win7 64 bit

      ProgSkeet_12_120402_1730

      desktop and laptop

      imageshack.us/photo/my-images/138/infectusk.png

    160. Progskeet_Release
      04-03-2013
      08:04 AM
      160

      What i find funny is, people buy progskeets with no idea how to use them...
      It is not down to ProgSkeet devs to sit there and spoonfeed users who have bought it, Your paying for a device, not support aswell.. It doesn't say anywhere you will be supported and spoonfed untill you have your console downgraded :/
      If you have no idea how to use Progskeet then don't buy it, Its as simple as that.

    161. sonyweb
      04-03-2013
      08:28 AM
      161

      Originally Posted by Progskeet_Release
      What i find funny is, people buy progskeets with no idea how to use them...
      It is not down to ProgSkeet devs to sit there and spoonfeed users who have bought it, Your paying for a device, not support aswell.. It doesn't say anywhere you will be supported and spoonfed untill you have your console downgraded :/
      If you have no idea how to use Progskeet then don't buy it, Its as simple as that.
      They always get help from this forum.
      You just don't get it.Progskeet v1.2/1.21 isn't working as advertised and we are the ones testing bitstreams for them now.

    162. Progskeet_Release
      04-03-2013
      08:55 AM
      162

      Originally Posted by sonyweb
      They always get help from this forum.
      You just don't get it.Progskeet v1.2/1.21 isn't working as advertised and we are the ones testing bitstreams for them now.
      You misunderstood my post, what i mean is Progskeet is a small team and people seem to demand support. Such a small team can't provide that support to the thousands thats why Its annoying to see people complain about the 'no support from them'.
      I'm not having a go, i help people out to it just amazes me that people are getting wound up because there not receiving support when the answers to there questipns are already available. (I'm not talking about the actual bitstream releases and support with that)

    163. Sarah1331
      04-03-2013
      09:14 AM
      163

      Originally Posted by Progskeet_Release
      What i find funny is, people buy progskeets with no idea how to use them...
      It is not down to ProgSkeet devs to sit there and spoonfeed users who have bought it, Your paying for a device, not support aswell.. It doesn't say anywhere you will be supported and spoonfed untill you have your console downgraded :/
      If you have no idea how to use Progskeet then don't buy it, Its as simple as that.
      Ass hole response why do they have support forum? For devs to brag how big there ****s are??

    164. baileyscream
      04-03-2013
      09:24 AM
      164

      Originally Posted by Progskeet_Release
      What i find funny is, people buy progskeets with no idea how to use them...
      It is not down to ProgSkeet devs to sit there and spoonfeed users who have bought it, Your paying for a device, not support aswell.. It doesn't say anywhere you will be supported and spoonfed untill you have your console downgraded :/
      If you have no idea how to use Progskeet then don't buy it, Its as simple as that.
      funny. sounds like your talking out of your ass again!
      oh wait you are
      progskeet do offer support.
      it is freely offered to.

      now stop talking bull !!!!!!!!!!!
      ************* [ - Post Merged - ] *************
      Originally Posted by Progskeet_Release
      You misunderstood my post, what i mean is Progskeet is a small team and people seem to demand support. Such a small team can't provide that support to the thousands thats why Its annoying to see people complain about the 'no support from them'.
      I'm not having a go, i help people out to it just amazes me that people are getting wound up because there not receiving support when the answers to there questipns are already available. (I'm not talking about the actual bitstream releases and support with that)
      progskeet have a support forum
      progskeet devs are mods there
      progskeet official suport forum http://forum.dayton360mods.com/forum...p?63-Progskeet

      answers to our questions are not available and are ignored
      http://forum.dayton360mods.com/showt...1-21-available


      so where is the support that this group is supposed to offer?
      ************* [ - Post Merged - ] *************
      i must be seeing things. i look at this page and i can see the words "support"

      looks like another "we build it you sort it amongst yourselves" slogan to me






      ************* [ - Post Merged - ] *************
      Originally Posted by k_shake
      appears to me too... FF FF FF 00 FF

      Code:
      ActID = 02a121cf
      ExpID = 03a121cf
      Initializing Target Device...
      Setting BSR Configurations...
      Reading Security...
      SILSIG: 
      E5 B1 00 0B 
      ACTEL_SLOG_UROW = 
      FF FF FF FF FF FF FF FF FF FF FF FF FF 00 FF FF 
      User information: 
      CYCLE COUNT: 00000003
      CHECKSUM = 
      FF FF 
      Design Name = 
      FF FF FF FF FF FF FF FF FF 
      ==================================================
      FSN: 050957d0
      Security Setting : 
      FlashROM Read protected by pass key.
      Encrypted FlashROM Programming Enabled.
      Encrypted FPGA Array Programming Enabled.
      ==================================================
      Win7 64 bit

      ProgSkeet_12_120402_1730

      desktop and laptop

      imageshack.us/photo/my-images/138/infectusk.png
      so yours hasnt failed

      can you now produce a dump?

    165. GregoryRasputin
      04-03-2013
      09:38 AM
      165

      Originally Posted by Progskeet_Release
      You misunderstood my post, what i mean is Progskeet is a small team and people seem to demand support. Such a small team can't provide that support to the thousands
      If they don't have the ability to support their customers, then they should close up shop and refund all the people that have been basically ripped off.


      Originally Posted by Progskeet_Release
      thats why Its annoying to see people complain about the 'no support from them'.
      What is really annoying is seeing you suck the Progskeet teams dick and lick their ass's at the same time, its sickening, nauseating and vile, its one thing defending someone when they have been wronged, but you are defending the ones in the wrong.

      Defending someone because they feed you free stuff and turning a blind eye to their wrong doings is wrong and lame.

      Don't get me wrong, i respect the Progskeet team, their original device was flawless, but they f*cked up with their newest product and haven't really had the balls to say sorry.

      Also they are a company, they MUST provide support, if they didn't want to help people, then they shouldn't have gotten into the business




      Originally Posted by Progskeet_Release
      I'm not having a go, i help people out to it just amazes me that people are getting wound up because there not receiving support
      People are wound up because they were ripped off/scammed/screwed etc, etc, etc....

    166. Progskeet_Release
      04-03-2013
      09:49 AM
      166

      Originally Posted by baileyscream
      funny. sounds like your talking out of your ass again!
      oh wait you are
      progskeet do offer support.
      it is freely offered to.

      now stop talking bull !!!!!!!!!!!
      ************* [ - Post Merged - ] *************


      progskeet have a support forum
      progskeet devs are mods there
      progskeet official suport forum http://forum.dayton360mods.com/forum...p?63-Progskeet

      answers to our questions are not available and are ignored
      http://forum.dayton360mods.com/showt...1-21-available


      so where is the support that this group is supposed to offer?
      When you buy a progskeet, where does it say you receive support with every little thing, ProgSkeet devs are not obliged to give support just because there is a support forum for it, maybe thats for other users to give support and whenever the devs are able to give their input then they will...
      And info on how to install bitstreams and everything else is on the wiki, you should check it out, maybe not for 1.2 but for 1.0/1.1 there is and its the same process ;s

    167. 3absiso
      04-03-2013
      10:07 AM
      167

      Originally Posted by Progskeet_Release
      What i find funny is, people buy progskeets with no idea how to use them...
      It is not down to ProgSkeet devs to sit there and spoonfeed users who have bought it, Your paying for a device, not support aswell.. It doesn't say anywhere you will be supported and spoonfed untill you have your console downgraded :/
      If you have no idea how to use Progskeet then don't buy it, Its as simple as that.
      What the Fuuuuuuck you are talking about.
      you are silly, stupid, and if you are a lawyer you will lose all your cases with your ****tttttty way of defending.
      or you can show us your magical way of working with V1.2 to get the work done.
      i rarely get pissed but you pissed me with your childish comments.
      did you see any one here posting about V1.1 not working, it is the V1.2 we are talking about if you forget,

    168. baileyscream
      04-03-2013
      10:07 AM
      168

      Originally Posted by Progskeet_Release
      When you buy a progskeet, where does it say you receive support with every little thing, ProgSkeet devs are not obliged to give support just because there is a support forum for it, maybe thats for other users to give support and whenever the devs are able to give their input then they will...
      And info on how to install bitstreams and everything else is on the wiki, you should check it out, maybe not for 1.2 but for 1.0/1.1 there is and its the same process ;s
      i want to know right now if that is there official view on this.


      can you get on the irc and ask for a member of the progskeet team to come in and verify that the statement you have just posted is progskeets view on this.



      -------------------------------------------------------------------
      and what is the point of looking at the wiki when you have just said it yourself that its for 1.1 nor 1.2
      if what was posted on the wiki had info on getting the 1.2 to work then this thread wouldnt be here.
      but this thread is here due to the fact that the 1.2 does not work.

      the dev boards all work just fine with this but that is due to the size of the actel chip being bigger on the dev boards.

      and there not testing on retail boards there testing on dev boards.

      this is why uf6667 has you giving feedback from this thread so he can make changes to the bitstream

    169. haz367
      04-03-2013
      10:09 AM
      169

      agreed a bit there..we can't expect help all the time, but what's easy for one isn't for another, lucky we got lots of help here cuse going by the off support forum, although good info to be found and like with the E3 it just needs alot of absorbing info...ok..i'm a little slow..no problem..stop being an ignorant f*ck pls tho....i already know the simple questions are not answerd because its to simple..right? again maybe simple for u...a little helping the noobs wont hurt huh..the simple ones....talking about simple/sad people..the l33ts...to bad it doesn't hurt much

      and while ur at it...instead of releasing beta bitstreams for people to test as it seems the first fixed didn't fix the write..atleast not for the ones that tested it, put it all together and this 1.2 is one piece of crap right....why was 1.1 pulled anyway?

      and liking the guy cuse ur licking balls and get stuff for free....1+2=3
      also grow up please and hopefully u can release a working bitstream for NAND/NOR, as it would be nice for the simple people right..atleast we can't blame the bitstream then...


      and i can't redo my edit, it gets ignored by them anyway....the shorts are simply a bug somewhere...they know..but just release sh*t so other test piggy's can test and report....sipmle people

    170. vb_encryption_vb
      04-03-2013
      10:35 AM
      170

      Can I get a refund.... I wouldn't even give my 1.2 away. Worthless.

    171. Progskeet_Release
      04-03-2013
      10:36 AM
      171

      Originally Posted by baileyscream
      i want to know right now if that is there official view on this.


      can you get on the irc and ask for a member of the progskeet team to come in and verify that the statement you have just posted is progskeets view on this.



      -------------------------------------------------------------------
      and what is the point of looking at the wiki when you have just said it yourself that its for 1.1 nor 1.2
      if what was posted on the wiki had info on getting the 1.2 to work then this thread wouldnt be here.
      but this thread is here due to the fact that the 1.2 does not work.

      the dev boards all work just fine with this but that is due to the size of the actel chip being bigger on the dev boards.

      and there not testing on retail boards there testing on dev boards.

      this is why uf6667 has you giving feedback from this thread so he can make changes to the bitstream
      Actually, no uf6667 is testing it on retail devices

      [16:00] <+_Skeet> so have you tested the stream on retails skeets
      [16:00] <+_Skeet> not your dev skeet
      [16:00] <[MENTION=192300]uf6667[/MENTION]> yes

      Hes been on irc most of the day helping people so he does help just not on the forums, when i told him people should receive gauranteed support with the purchase he lold, so i think that answers your question.
      I don't think he will come here but feel free to come on the irc lol

      And when i say 1.2 is the same process as 1.1 i mean its the same in winskeet to dump/write etc and there is enough info on installing bitstreams also available on the wiki which is what alot of people are having problems with atm which is also the same process as installing a bitstream on 1.0/1.1, Its just people cant seem to be able to with 1.2

      Heres some more of what uf said about the latest stream, he says it works on his retail 1.2

      [16:00] <[MENTION=192300]uf6667[/MENTION]> I wanna make a one click app
      [16:00] <[MENTION=192300]uf6667[/MENTION]> I mean so far
      [16:00] <[MENTION=192300]uf6667[/MENTION]> it's retard proof since yesterday
      [16:00] <[MENTION=192300]uf6667[/MENTION]> seriously
      [16:00] <[MENTION=192300]uf6667[/MENTION]> if you get bad blocks with yesterday's bitstream
      [16:00] <[MENTION=192300]uf6667[/MENTION]> then you have a loose clip
      [16:00] <[MENTION=192300]uf6667[/MENTION]> no question about it

      I told him people are still having problems with it so he will probably get another update out soon.

    172. vb_encryption_vb
      04-03-2013
      10:42 AM
      172

      Originally Posted by Progskeet_Release
      I told him people are still having problems with it so he will probably get another update out soon.


      So in what 6 - 12 months?

    173. Progskeet_Release
      04-03-2013
      10:47 AM
      173

      Originally Posted by vb_encryption_vb
      So in what 6 - 12 months?
      He's been rolling out several updates lately and is currently fixing the NAND2 tab in winskeet, The team had problems amongst themselves that they needed to sort out and it looks like uf is the only one stepping up to fix it and i think that is why it took a while to get these updates out.

      I'm not sucking nobodys dik, I've supported and defended progskeet alot longer than i've actually known or spoke to any of the devs, I've just never posted on this forum before.
      And if you saw sonywebs post you can see he got the bitstream installed on his 1.2, which people were having problems with before... things are slowly progressing, Isn't that a good thing atleast?

    174. vb_encryption_vb
      04-03-2013
      10:58 AM
      174

      Originally Posted by Progskeet_Release
      He's been rolling out several updates lately and is currently fixing the NAND2 tab in winskeet, The team had problems amongst themselves that they needed to sort out and it looks like uf is the only one stepping up to fix it and i think that is why it took a while to get these updates out.

      I'm not sucking nobodys dik, I've supported and defended progskeet alot longer than i've actually known or spoke to any of the devs, I've just never posted on this forum before.
      And if you saw sonywebs post you can see he got the bitstream installed on his 1.2, which people were having problems with before... things are slowly progressing, Isn't that a good thing atleast?


      No, shyt should have been sorted out before 1.2 was sold to the market. Only reason I bought a progskeet was to avoid the e3, which I now have because 1.2 couldn't do a NOR. Had I known it couldn't do a NOR before hand I would have never wasted the money on it. I have no reason to use my 1.2 now. It sits and collects dust.

      It was bad business and I'll never buy anything progskeet related again.

    175. Sarah1331
      04-03-2013
      12:03 PM
      175

      Originally Posted by Progskeet_Release
      He's been rolling out several updates lately and is currently fixing the NAND2 tab in winskeet, The team had problems amongst themselves that they needed to sort out and it looks like uf is the only one stepping up to fix it and i think that is why it took a while to get these updates out.

      I'm not sucking nobodys dik, I've supported and defended progskeet alot longer than i've actually known or spoke to any of the devs, I've just never posted on this forum before.
      And if you saw sonywebs post you can see he got the bitstream installed on his 1.2, which people were having problems with before... things are slowly progressing, Isn't that a good thing atleast?
      Ask for an eta on the NAND 2 please or a guesstimate ?? Day week month 6

      No joke I'd love to know I use my own proto and would love to write NAND two

      Tell him it doesn't matter if they (NAND one and two) read write together just on there own is good enough

    176. Progskeet_Release
      04-03-2013
      12:37 PM
      176

      Originally Posted by Sarah1331
      Ask for an eta on the NAND 2 please or a guesstimate ?? Day week month 6

      No joke I'd love to know I use my own proto and would love to write NAND two

      Tell him it doesn't matter if they (NAND one and two) read write together just on there own is good enough
      I'll ask him when hes back, he is afk at the moment but my guess would be maybe a week, or less even.
      He also said he don't care about your adapter buisness, you carry on as you were xD
      And also tell underwurlde he could have just asked uf for the 1.1 schematics etc instead of doing it all himself, would have saved him some time :P

    177. GregoryRasputin
      04-03-2013
      12:41 PM
      177

      I think im going to ban someone, as they are irritating me..........

    178. Sarah1331
      04-03-2013
      12:42 PM
      178

      Originally Posted by Progskeet_Release
      I'll ask him when hes back, he is afk at the moment but my guess would be maybe a week, or less even.
      He also said he don't care about your adapter buisness, you carry on as you were xD
      And also tell underwurlde he could have just asked uf for the 1.1 schematics etc instead of doing it all himself, would have saved him some time :P
      Am not fussy if he knocks adaptors out saves me the job lol

      And me and Andy improved the 1.1 ten fold anyway lol so it wouldn't have saved that much extremely talented guy Andy and a week seems long if it worked for them already but hey we all got lives

    179. Sarah1331
      04-03-2013
      12:46 PM
      179

      Originally Posted by GregoryRasputin
      I think im going to ban someone, as they are irritating me..........
      It's the attutde of the youth of today

    180. Progskeet_Release
      04-03-2013
      12:52 PM
      180

      Originally Posted by Sarah1331
      Am not fussy if he knocks adaptors out saves me the job lol

      And me and Andy improved the 1.1 ten fold anyway lol so it wouldn't have saved that much extremely talented guy Andy and a week seems long if it worked for them already but hey we all got lives
      A week was just my guess, Could be much sooner but he hasn't replied yet.
      And does Andys come with the fpga already mounted, or do people send off there 1.2 and get the Phoenix back with it on?

    181. Sarah1331
      04-03-2013
      12:56 PM
      181

      Originally Posted by Progskeet_Release
      A week was just my guess, Could be much sooner but he hasn't replied yet.
      And does Andys come with the fpga already mounted, or do people send off there 1.2 and get the Phoenix back with it on?
      We need your 1.2 as we cannot source the fpga

      Some wonder if uf has fixed because others are about to take some of the pie fixing the **** progskeet left

    182. Progskeet_Release
      04-03-2013
      01:03 PM
      182

      Originally Posted by Sarah1331
      We need your 1.2 as we cannot source the fpga

      Some wonder if uf has fixed because others are about to take some of the pie fixing the **** progskeet left
      People are wondering if uf has fixed the bitstream?
      I'm still not able to test it, I've actually ordered my own 1.2 today since i was being moaned at yesterday for getting a free dev board lol
      uf has said it should be working on retails, he tested on that.
      But I'll try as soon as I get it in the mail.

    183. KopKaasDamp
      04-03-2013
      01:39 PM
      183

      Yo progskeet team just say sorry to your buyers for the problems on your latest 1.2 and 1.21 products and work on a solution and refund your costumers if you can't fix it.

    184. Progskeet_Release
      04-03-2013
      02:08 PM
      184

      [MENTION=245343]Sarah1331[/MENTION]

      [20:04] <Skeet> Are you able to provide an eta for nand tab 2 by any chance?
      [20:06] <uf6668> yeah tomorrow
      [20:06] <uf6668> well, rather tomorrow evening
      [20:06] <uf6668> or maybe the day after
      [20:06] <uf6668> I'm going home tomorrow, so lots of travel
      [20:06] <Skeet>

      And also about the latest bitstream, he just tested it again on Retail 1.2
      [20:17] <uf6668> braj
      [20:17] <uf6668> it's working
      [20:18] <uf6668> the latest one I made
      [20:18] <uf6668> the 130402_1730

    185. Sarah1331
      04-03-2013
      02:28 PM
      185

      Originally Posted by Progskeet_Release
      [MENTION=245343]Sarah1331[/MENTION]

      [20:04] <Skeet> Are you able to provide an eta for nand tab 2 by any chance?
      [20:06] <uf6668> yeah tomorrow
      [20:06] <uf6668> well, rather tomorrow evening
      [20:06] <uf6668> or maybe the day after
      [20:06] <uf6668> I'm going home tomorrow, so lots of travel
      [20:06] <Skeet>

      And also about the latest bitstream, he just tested it again on Retail 1.2
      [20:17] <uf6668> braj
      [20:17] <uf6668> it's working
      [20:18] <uf6668> the latest one I made
      [20:18] <uf6668> the 130402_1730
      ****ing superb *****

    186. 3absiso
      04-03-2013
      02:28 PM
      186

      Originally Posted by Progskeet_Release
      [MENTION=245343]Sarah1331[/MENTION]

      [20:04] <Skeet> Are you able to provide an eta for nand tab 2 by any chance?
      [20:06] <uf6668> yeah tomorrow
      [20:06] <uf6668> well, rather tomorrow evening
      [20:06] <uf6668> or maybe the day after
      [20:06] <uf6668> I'm going home tomorrow, so lots of travel
      [20:06] <Skeet>

      And also about the latest bitstream, he just tested it again on Retail 1.2
      [20:17] <uf6668> braj
      [20:17] <uf6668> it's working
      [20:18] <uf6668> the latest one I made
      [20:18] <uf6668> the 130402_1730
      This is good no doubt
      hope someone can confirm it guys, i know you are frustrated with the V1.2, can someone remove the dust on it and test it.
      i can not since mine is being Phinxed

    187. Sarah1331
      04-03-2013
      02:36 PM
      187

      Originally Posted by 3absiso
      This is good no doubt
      hope someone can confirm it guys, i know you are frustrated with the V1.2, can someone remove the dust on it and test it.
      i can not since mine is being Phinxed
      You will not regret it

    188. 3absiso
      04-03-2013
      02:47 PM
      188

      Originally Posted by Sarah1331
      You will not regret it
      not even 0.0000000001% regret

    189. sonyweb
      04-03-2013
      02:55 PM
      189

      Originally Posted by 3absiso
      This is good no doubt
      hope someone can confirm it guys, i know you are frustrated with the V1.2, can someone remove the dust on it and test it.
      i can not since mine is being Phinxed
      Check the Progskeet 1.2/1.21 bitstream thread at dayton360mods in the progskeet release news section.
      Latest bitstream still not working.

    190. underwurlde
      04-03-2013
      03:03 PM
      190

      Evening all.

      And hello to [MENTION=269704]Progskeet_Release[/MENTION]: After reading through this thread you seem to have put up with a lot of perhaps incorrect assumptions and resultant flack about who you are and regardless have stuck around. Brave man. Respect for that.

      I am a trusting fellow, so I will assume that what you say is the truth, deal?

      Some things you posted made me sit bolt upright and really take note...

      Post#60:

      Originally Posted by Progskeet_Release
      Well, 1.2 worked fine on NAND flash so it did work, you could read NOR it was just the writing, When 1.2 got to resellers uf6667 was under the impression it would work as intended from the start, lets not forget uf has developer progskeet boards with the right components on it so it worked fine for him, Manufacturers made a lot of fkups which then led to the stream needing to be halved in size for it to work as it should with NOR flash.
      Reiterated in Post#65 when you went on to say:
      Originally Posted by Progskeet_Release
      uf6667 was under the impression it would work as it should from the start, because he has the right components on his dev boards and the 2121 stream would have worked fine on them.
      And once they hit resellers then it was most likely out of his hands i guess
      INTERESTING!!!

      I wonder what dev boards this chap uses. Is it really a simple matter of using 'the right components' to make the 2121 BitStream work on a v1.2????

      My obvious question therefore to this is: what are the wrong components and what should they be?

      Thank you,

      Andy

      PS
      It is good to see that the problems with the v1.2 are now hopefully being addressed at last to the relief of many. Yes, I was one of those who got a v1.2 only to find it did not work. But after realizing that the v1.1 did work and that the FPGA on the the v1.2 was the same I went about recreating the v1.1 PCB and hence the Phoenix I & II was born out of necessity.

      Originally Posted by Progskeet_Release
      And also tell UnderWurlde he could have just asked uf for the 1.1 schematics etc instead of doing it all himself, would have saved him some time :P
      Ha! Never mind, only took me 20mins to reverse engineer each ProgSkeet version as they are only break-out boards for the pins of the FPGA with some obvious glue components around it.

      Recreating the PCBs took a bit longer (due to drawing of the component footprints) but can bash a PCB out like that in under 4 hours as [MENTION=245343]Sarah1331[/MENTION] will confirm.

    191. vb_encryption_vb
      04-03-2013
      03:09 PM
      191

      Originally Posted by 3absiso
      This is good no doubt
      hope someone can confirm it guys, i know you are frustrated with the V1.2, can someone remove the dust on it and test it.
      i can not since mine is being Phinxed
      Not removing dust, would rather get it Phinxed as well but I'm already pissed about the 60 I already put in to the garbage.

    192. Mistawes
      04-03-2013
      03:10 PM
      192

      Originally Posted by underwurlde
      what are the wrong components and what should they be?
      They fitted an A3P125 when they should have used an A3P250..

      Welcome back!

    193. Sarah1331
      04-03-2013
      03:21 PM
      193

      Originally Posted by Mistawes
      They fitted an A3P125 when they should have used an A3P250..

      Welcome back!
      But all bitstreams realeased were for the smaller 125 they never realeased a 250 bit stream

      So somebody knew quite eairly makes me wonder if this was just an excuse

    194. underwurlde
      04-03-2013
      04:05 PM
      194

      The basic difference between the '125 and the '250 FPGA (everything else of interest being equal I assume) is that the '250 has twice as many 'System Gates' and D-FlipFlop 'VersaTiles'.

      So, IF a '250 should've been fitted instead of the '125 then the dev's will have only half the resources to make any BitStream work and as a result a potential massive headache if the original BitStream developed requires more gates / tiles than the '125 supports.

      Gunna wait for confirmation on what component(s) is/are incorrect before I make further assumptions, but I guess they unfortunately did not do a pre-production run of the v1.2 before releasing it to full production.

      Andy

    195. guerrierodipace
      04-03-2013
      04:52 PM
      195

      130402_1730
      130403_1731
      130404_1732
      130405_1733
      130406_1734
      130407_1735
      ..................
      191231_6666

    196. 3absiso
      04-04-2013
      03:52 AM
      196

      Originally Posted by guerrierodipace
      130402_1730
      130403_1731
      130404_1732
      130405_1733
      130406_1734
      130407_1735
      ..................
      191231_6666

      Good One

    197. Sarah1331
      04-05-2013
      03:00 AM
      197

      Still nobody test??

    198. sonyweb
      04-05-2013
      03:26 AM
      198

      Originally Posted by Sarah1331
      Still nobody test??
      All the released v1.2/1.21 bitstream fixes don't work. I've tried all and none of them is able to dump CFI(always invalid).

      Now waiting for someone else to confirm this.

    199. beatdowniidx
      04-05-2013
      06:55 AM
      199

      Originally Posted by sonyweb
      All the released v1.2/1.21 bitstream fixes don't work. I've tried all and none of them is able to dump CFI(always invalid).

      Now waiting for someone else to confirm this.
      not surprised by this at all

    200. Sarah1331
      04-05-2013
      07:55 AM
      200

      Originally Posted by beatdowniidx
      not surprised by this at all
      I am a little but hey at least he is trying

    201. M8nTrap
      04-05-2013
      10:20 AM
      201

      I confirm! if you wait a functional bitstream, you can collect dust like a progskeet...

    202. beatdowniidx
      04-05-2013
      05:55 PM
      202

      Originally Posted by Progskeet_Release
      Why are you a sucker for buying it lol?
      The clips arn't made by progskeet if you didn't know :P
      well maybe they should make clips that work or is that asking to much

    203. Sarah1331
      04-06-2013
      01:17 AM
      203

      Originally Posted by beatdowniidx
      well maybe they should make clips that work or is that asking to much
      The ones out there work

      They won't make them as there unreliable

    204. digiprog
      04-06-2013
      02:33 AM
      204

      lety me say something.. the guy has balls to come here and defend progskeet.

      i respect that too, but wait how come the progskeet had a ap125 while the dev board had 250 FPGA ?? and the bitstream was same in size as the 125 i assume ?

      and howcome the progskeet team kept selling the 1.2 while there was no working bitstream ?

    205. Sarah1331
      04-06-2013
      02:37 AM
      205

      Originally Posted by digiprog
      lety me say something.. the guy has balls to come here and defend progskeet.

      i respect that too, but wait how come the progskeet had a ap125 while the dev board had 250 FPGA ?? and the bitstream was same in size as the 125 i assume ?

      and howcome the progskeet team kept selling the 1.2 while there was no working bitstream ?
      Been asked so many times but no answer sorry

    206. digiprog
      04-06-2013
      02:39 AM
      206

      haha that's what i've been expecting .. thnx sarah

    207. beatdowniidx
      04-06-2013
      04:26 PM
      207

      Originally Posted by Sarah1331
      The ones out there work

      They won't make them as there unreliable
      i deffo think there is a need for a nand clip for the COK-002 rather butchering the clip to make it fit

    208. Sarah1331
      04-06-2013
      04:41 PM
      208

      Originally Posted by beatdowniidx
      i deffo think there is a need for a nand clip for the COK-002 rather butchering the clip to make it fit
      Have you seen my adaptor??

    209. beatdowniidx
      04-06-2013
      05:38 PM
      209

      Originally Posted by Sarah1331
      Have you seen my adaptor??
      yeah its a kick ass bit of work but was under the impression that you had to remove the nand from the motherboard which is way out of my comfort zone

    210. Sarah1331
      04-07-2013
      03:54 AM
      210

      Well [MENTION=255678]ProgSkeet[/MENTION]_realease
      I suppose the 2-3 days is one of those cow pat lines again but what did I expect really lol I suppose exam is to blame and having a life I know it's been reported for some time the NAND 2 not working suppose we will wait the 6 month for that to not be fixed also

    211. underwurlde
      04-07-2013
      05:24 AM
      211

      I wonder why they don't just release the code. Be shot of it. Let someone else have a crack at getting it right at last. If I was in their shoes (and I'm glad I'm not), I would. But I bear in mind that it might actually be an impossible task if indeed a '250 FPGA really does need to be fitted instead of the '125.

      Andy

    212. Progskeet_Release
      04-07-2013
      09:36 AM
      212

      Originally Posted by underwurlde
      I wonder why they don't just release the code. Be shot of it. Let someone else have a crack at getting it right at last. If I was in their shoes (and I'm glad I'm not), I would. But I bear in mind that it might actually be an impossible task if indeed a '250 FPGA really does need to be fitted instead of the '125.

      Andy
      The 1st bitstream was for the 250fpga
      You can't but a 250fpga on, you're right.
      Not been able to speak to uf yet [MENTION=245343]Sarah1331[/MENTION] ;/

    213. sonyweb
      04-07-2013
      11:11 AM
      213

      Originally Posted by Progskeet_Release
      The 1st bitstream was for the 250fpga
      You can't but a 250fpga on, you're right.
      Not been able to speak to uf yet [MENTION=245343]Sarah1331[/MENTION] ;/

      What a waste of our time and money.
      If Uf or Progskeet Team needs help they should'nt feel shy and contact people who are ever on the ready,in fixing their 1.2/1.21 bitstream issue.We all want them to be on track.
      So Progskeet Team,Uf grow up and fix this issue as soon as possible.

    214. underwurlde
      04-07-2013
      04:00 PM
      214

      [MENTION=269704]Progskeet_Release[/MENTION], do you know what development board UF666 uses to develop the BitStreams?

      Thanks again,

      Andy

    215. sonyweb
      04-07-2013
      05:09 PM
      215

      Originally Posted by underwurlde
      [MENTION=269704]Progskeet_Release[/MENTION], do you know what development board UF666 uses to develop the BitStreams?

      Thanks again,

      Andy
      Yessss,Andy!!!!!!

    216. Sarah1331
      04-08-2013
      03:29 AM
      216

      [MENTION=269704]Progskeet_Release[/MENTION] where can we buy 125 fpga



      Sent from my iPhone 5 using Tapatalk 2

    217. baileyscream
      04-08-2013
      03:08 PM
      217

      need help to aquire the following
      i will spoiler up the ones i get as i get them
      thanks


      PROGSKEET DRIVERS:-

      drivers_110726

      [spoiler=i have this one]drivers_110812 (libsub0)[/spoiler]

      drivers_a110812

      [spoiler=i have these]drivers_111121 (winusb)

      zadig[/spoiler]


      WINSKEET :-

      [spoiler=i have these]ProgSkeet_110802

      ProgSkeet_110803

      ProgSkeet_110807

      ProgSkeet_110808

      ProgSkeet_110811

      ProgSkeet_110811-A

      ProgSkeet_110811-B

      ProgSkeet_110811-C

      ProgSkeet_110811-D

      ProgSkeet_110812-A

      ProgSkeet_110813

      ProgSkeet_110815

      ProgSkeet_110816

      ProgSkeet_110819[/spoiler]

      ------------------------------------------------

      PROGSKEET BITSTREEM'S :-

      [spoiler=i have these]ProgSkeet_Bitstreams_111106

      ProgSkeet_Bitstreams_111126[/spoiler]

      -------------------------------------------------
      111004/8:-
      [spoiler=i have this one]WinSkeet40000_111004 (libusb) [/spoiler]

      YASkeet_20111008

      iSkeet_20111008

      --------------------------------------------------
      111120:-
      [spoiler=i have this one]Winskeet111120 (WinUSB) [/spoiler]

      YASkeet_20111120

      iSkeet_20111120

      -------------------------------------------------
      111205:-
      [spoiler=i have this one]Winskeet111205(WinUSB)[/spoiler]


      thank you [MENTION=207545]3absiso[/MENTION] for the files

    218. underwurlde
      04-08-2013
      04:44 PM
      218

      ^ Just a little teeny-weeny bit of a hijack there then!

      Andy

    219. baileyscream
      04-08-2013
      04:59 PM
      219

      Originally Posted by underwurlde
      ^ Just a little teeny-weeny bit of a hijack there then!

      Andy
      just a tiny bit

      actually i'm going through everything to see if i can get this prog 1.2 working with ALL currently available programs and bitstreams.

      i did have them but i have just re-installed my lappy to rule out secondary programs interfering with winskeet etc and deleted them all.

      so its still about getting the prog 1.2 working

    220. Progskeet_Release
      04-09-2013
      05:46 AM
      220

      Just a little update on NAND 2 TAB and new bitstream release on its way

      [11:34] <Skeet> Hi uf6667
      [11:34] <Skeet> Any news on nand 2 tab fix :D
      [11:35] <uf6667> yes but still testing
      [11:35] <uf6667> currently trying to figure out if teh soldering is ****ed
      [11:35] <uf6667> or the software
      [11:35] <uf6667> or the bitstream
      [11:35] <uf6667> (samsung Q)
      [11:36] <Skeet> Ok :P
      [11:37] <Skeet> Are you able to dump\write with 1.2 then, nand and nor
      [11:37] <Skeet> Noones been able to so far with latest releases
      [11:37] <Skeet>
      [11:41] <uf6667> really? I've heard a great deal of reports that went good with the one rlsd on 02/04
      [11:42] <uf6667> but winskeet does make a difference
      [11:42] <Skeet> Hmm
      [11:42] <Skeet> It could be nthe version there using
      [11:43] <Skeet> Or the people testing it out are new to all this
      [11:43] <uf6667> yeah
      [11:43] <uf6667> I just made a new bitstream
      [11:43] <Skeet> Sweet
      [11:43] <uf6667> about to test it with samsung q... yet again
      [11:43] <uf6667> if it doesn't work
      [11:43] <Skeet>
      [11:44] <uf6667> then I'll try replacing the voltage regulator
      [11:44] <uf6667> cause I have neither logic analyzer nor spectrum analyzer nor oscope :/

      Try the latest b\streams with different winskeets for now, uf has had alot of success reports with the 02\04 release

      [MENTION=245343]Sarah1331[/MENTION]
      I googled a while back and a wholesaler came up that was selling 125fpga's, I Tried googling just but doesn't seem to come up anymore and i don't think uf will give you his supplier xD

    221. 3absiso
      04-09-2013
      05:49 AM
      221


      nothing certain still,
      Thanx though

    222. Progskeet_Release
      04-09-2013
      05:52 AM
      222

      Originally Posted by 3absiso

      nothing certain still,
      Thanx though
      Ye nothing certain but he seems to be the only dev trying to sort it out, I have faith in him :P

    223. baileyscream
      04-11-2013
      05:12 AM
      223

      [MENTION=207545]3absiso[/MENTION]
      [MENTION=269704]Progskeet_Release[/MENTION]
      [MENTION=245343]Sarah1331[/MENTION]
      [MENTION=251171]underwurlde[/MENTION]
      [MENTION=10135]sonyweb[/MENTION]

      first comfirmed NOR downgrade with the 1.2 that i have personaly heard of

      Originally Posted by Monteirodjk
      Originally Posted by baileyscream
      Originally Posted by Monteirodjk
      hi man just quick question i received today progskeet 1.2 today with nor clip. motherboard is DIA-001 how do give 3.3V into motherboard. u help me last year with dual nands ..thank you
      just power up the ps3 and it will power up the nor
      & connect tristate to gnd first to stop the syscon taking control of the NOR
      hi brother bail me again how you doing?just let u know ps3 nor dowgrade went all good no trouble atall after u give another Tip thank you again... listen i received another ps3 today bricked the guy still got multiman nand dump lucky. so ask you how do i interleave into 2 files to flash backup back?... thanks
      i have asked [MENTION=152653]Monteirodjk[/MENTION] to come into this thread and post what bitstream and winskeet version he used to get this success

      (no point in not flooding the thread. i dont think he's comming in)

    224. 3absiso
      04-11-2013
      05:45 AM
      224

      Good for any one with ProgSkeet V1.2,

    225. baileyscream
      04-11-2013
      03:33 PM
      225

      ok so appart from this 1 case what is everyone's problem with the progskeet 1.2

      mine is that the pc simply wont detect the prog after updating any bitstream

    226. Progskeet_Release
      04-11-2013
      03:53 PM
      226

      Originally Posted by baileyscream
      ok so appart from this 1 case what is everyone's problem with the progskeet 1.2

      mine is that the pc simply wont detect the prog after updating any bitstream
      Will ask uf when he gets on about that

    227. Sarah1331
      04-11-2013
      04:24 PM
      227

      Originally Posted by baileyscream
      [MENTION=207545]3absiso[/MENTION]
      [MENTION=269704]Progskeet_Release[/MENTION]
      [MENTION=245343]Sarah1331[/MENTION]
      [MENTION=251171]underwurlde[/MENTION]
      [MENTION=10135]sonyweb[/MENTION]

      first comfirmed NOR downgrade with the 1.2 that i have personaly heard of



      i have asked [MENTION=152653]Monteirodjk[/MENTION] to come into this thread and post what bitstream and winskeet version he used to get this success
      so please dont flood this thread. give him a chance to post after this reply so his post can be found easly as this is important to all that have the 1.2
      thanks guy's
      Not surprised if he is uf lol I think someone may call bs on the 12 post member


      Sent from my iPad using Tapatalk HD

    228. baileyscream
      04-11-2013
      05:02 PM
      228

      Originally Posted by Sarah1331
      Not surprised if he is uf lol I think someone may call bs on the 12 post member


      Sent from my iPad using Tapatalk HD
      na i have been in p/m with him for a while now.
      i thought he was first talking about a 1.1 so i helped him to get it working.
      but when i realised he was on about 1.2 it was a shock

      its a shame this 1.2 is so hit and miss hardware wise

      1. bad caps

      2. if not detected by injectus then there is a short below the U3 volt reg (i have checked that btw)

      3. not detected by pc after programming
      ---------------------------------------------------------------------------------

      [MENTION=269704]Progskeet_Release[/MENTION] you may want to mention this to him

      while programing via injectus the first time (and it hasnt happened since)
      i had

      Erase
      .
      .
      ACTEL_SLOG_UROW =
      8F 30 FE 28 FD C5 79 B8 99 F5 47 E7 6B 00 8B 71




      NOW I GET




      Erase
      .
      .
      ACTEL_SLOG_UROW =
      FF FF FF FF FF FF FF FF FF FF FF FF FF 00 FF FF
      ************* [ - Post Merged - ] *************
      [MENTION=245343]Sarah1331[/MENTION]
      you have a 1.2 dont you?
      have you programed a bitstream to the prog and had it detect the prog when connected to slave board?

    229. Progskeet_Release
      04-11-2013
      05:54 PM
      229

      Originally Posted by baileyscream
      na i have been in p/m with him for a while now.
      i thought he was first talking about a 1.1 so i helped him to get it working.
      but when i realised he was on about 1.2 it was a shock

      its a shame this 1.2 is so hit and miss hardware wise

      1. bad caps

      2. if not detected by injectus then there is a short below the U3 volt reg (i have checked that btw)

      3. not detected by pc after programming
      ---------------------------------------------------------------------------------

      [MENTION=269704]Progskeet_Release[/MENTION] you may want to mention this to him

      while programing via injectus the first time (and it hasnt happened since)
      i had

      Erase
      .
      .
      ACTEL_SLOG_UROW =
      8F 30 FE 28 FD C5 79 B8 99 F5 47 E7 6B 00 8B 71




      NOW I GET




      Erase
      .
      .
      ACTEL_SLOG_UROW =
      FF FF FF FF FF FF FF FF FF FF FF FF FF 00 FF FF
      ************* [ - Post Merged - ] *************
      [MENTION=245343]Sarah1331[/MENTION]
      you have a 1.2 dont you?
      have you programed a bitstream to the prog and had it detect the prog when connected to slave board?
      Ok he will be on tomorrow morning, i'll talk to him then.

    230. johnscrub
      04-11-2013
      05:57 PM
      230

      Try the latest b\streams with different winskeets for now, uf has had alot of success reports with the 02\04 release

      could u please link me to the release that ur speaking of??or anybody?

    231. baileyscream
      04-11-2013
      06:10 PM
      231

      Originally Posted by johnscrub
      Try the latest b\streams with different winskeets for now, uf has had alot of success reports with the 02\04 release

      could u please link me to the release that ur speaking of??or anybody?
      i have all 5 bitstreams and all the winskeets

      i will upload to hax what it doesnt have and post links to them all in about 10 - 15 min if you will hang on.

    232. johnscrub
      04-11-2013
      06:50 PM
      232

      Originally Posted by baileyscream
      i have all 5 bitstreams and all the winskeets

      i will upload to hax what it doesnt have and post links to them all in about 10 - 15 min if you will hang on.
      thanks!!i have tried and i cannot even get it to register the nand..what a pain in the A$$!!

    233. baileyscream
      04-11-2013
      07:01 PM
      233

      Originally Posted by johnscrub
      thanks!!i have tried and i cannot even get it to register the nand..what a pain in the A$$!!
      for some reason i cannot upload to the site
      i have even deleted the other bitstreams from the "other" section and it still wont let me upload any files

      i wonder if [MENTION=7773]GregoryRasputin[/MENTION] can see why i cannot upload tomorrow when he's about and i will put up these 5 bitstreams and all the winskeet programs that i have.

      or if he can make a progskeet download section then i have 1.1 bitstreams as well that i can upload

      failing all that i will just stick them in my git and post the links in here

    234. johnscrub
      04-11-2013
      07:03 PM
      234

      Thank you!!Ill keep checking back here or if u do could you please pm me a link for them as im gonna have a free weekend and come hell or high water im going to get it or smash it!!

    235. baileyscream
      04-11-2013
      07:19 PM
      235

      Originally Posted by johnscrub
      Thank you!!Ill keep checking back here or if u do could you please pm me a link for them as im gonna have a free weekend and come hell or high water im going to get it or smash it!!
      ok will do

    236. Sarah1331
      04-12-2013
      01:59 AM
      236

      No I have purchased a
      1.1 blue
      Y adaptor
      3 clips

      Now my 1.1 has been a resurrected 1.1 lol and now a Phoenix II
      Hopefully to be a Phoenix III or v2 or whatever he's calling it lol

      Ps my stuff works like s charm


      Sent from my iPhone 5 using Tapatalk 2

    237. haz367
      04-12-2013
      02:12 AM
      237

      < lurks along..., curious what bitstream was used on that NOR console, bitstream from 02/04..ProgSkeet_12_120402_1730?

      Code:
      All known? released Progskeet 1.2 Bitstreams
      http://rghost.net/45225092
      ProgSkeet_12_121018_0031
      ProgSkeet_12_121101_1223
      ProgSkeet_12_121106_2121
      ProgSkeet_12_130401_2010
      [converts_to_works_as_1.1]ProgSkeet_Bitsream_12_130330_1909
      ProgSkeet_12_120402_1730
      ProgSkeet_12_130401_1824
      Winskeets/Yaskeet/Progskeet:
      http://rghost.net/45225199
      ProgSkeet_110807
      YASkeet_20111120
      WinSkeet40000_111004
      WinSkeet40000_manual_test
      Winskeet111120
      Winskeet111205

    238. Progskeet_Release
      04-12-2013
      03:08 AM
      238

      It should be the 120402 release but should say 130402, typo I think lol xD

    239. Sarah1331
      04-12-2013
      03:27 AM
      239

      Originally Posted by Progskeet_Release
      It should be the 120402 release but should say 130402, typo I think lol xD
      NAND 2 tab???


      Sent from my iPhone 5 using Tapatalk 2

    240. Progskeet_Release
      04-12-2013
      03:43 AM
      240

      Originally Posted by Sarah1331
      NAND 2 tab???


      Sent from my iPhone 5 using Tapatalk 2
      Still fixing it

    241. Abkarino
      04-12-2013
      03:57 AM
      241

      Originally Posted by Sarah1331
      NAND 2 tab???


      Sent from my iPhone 5 using Tapatalk 2
      It is a bug in Winskeet it self not in progskeet [MENTION=245343]Sarah1331[/MENTION].
      WinSkeet have a bug in handling two threads that dump 2 NANDs at the same time and Ago who maintain WinSkeet had left it for a long time, but now someone else will do it.

    242. s25s
      04-12-2013
      04:04 AM
      242

      thxxxxxxxx

    243. baileyscream
      04-12-2013
      04:52 AM
      243

      Originally Posted by haz367
      < lurks along..., curious what bitstream was used on that NOR console, bitstream from 02/04..ProgSkeet_12_120402_1730?

      Code:
      All known? released Progskeet 1.2 Bitstreams
      http://rghost.net/45225092
      ProgSkeet_12_121018_0031
      ProgSkeet_12_121101_1223
      ProgSkeet_12_121106_2121
      ProgSkeet_12_130401_2010
      [converts_to_works_as_1.1]ProgSkeet_Bitsream_12_130330_1909
      ProgSkeet_12_120402_1730
      ProgSkeet_12_130401_1824
      Winskeets/Yaskeet/Progskeet:
      http://rghost.net/45225199
      ProgSkeet_110807
      YASkeet_20111120
      WinSkeet40000_111004
      WinSkeet40000_manual_test
      Winskeet111120
      Winskeet111205
      thanks haz. i have 1 bitstream that you dont have.
      Code:
      ProgSkeet_10_11_121101_1505.dat
      -------------------------------
      Initial release
      yet you have 3 before this first one ???
      does anyone have a change log for the release's so i can see what order they should be in [MENTION=269704]Progskeet_Release[/MENTION] maybe?so there are 8 bitstreams all together

      i also have 1 extra winskeet to you (WinSkeet40000_111002_2)

      yaskeet i have 1 more (YASkeet_20111008)

      aswell as other stuff

      if i can upload here then i will link them

      otherwise i will put them in my git and link them

    244. Sarah1331
      04-12-2013
      05:49 AM
      244

      Originally Posted by Abkarino
      It is a bug in Winskeet it self not in progskeet [MENTION=245343]Sarah1331[/MENTION].
      WinSkeet have a bug in handling two threads that dump 2 NANDs at the same time and Ago who maintain WinSkeet had left it for a long time, but now someone else will do it.
      Yes I know that

      Am not fussy if they don't work together just one at a time will sort me


      Sent from my iPhone 5 using Tapatalk 2

    245. haz367
      04-12-2013
      07:18 AM
      245

      Originally Posted by Progskeet_Release
      It should be the 120402 release but should say 130402, typo I think lol xD
      seen it posted..thx for confirm

      here's the checksums of them 1.2/1.21 bitstreams just incase in proper order?:


      Code:
      ProgSkeet_12_121018_0031
      MD5: 7f43d4cf5c40b4f1436fa910cb30bfb6
      ProgSkeet_12_121101_1223
      MD5: 815a965a927d5568ea65e8c7fe278d71
      ProgSkeet_12_121106_2121
      MD5: dbf030c19ce008716d6e5219814270ce
      fixed ( write NOR) bitstreams:
      [converts_to_works_as_1.1]ProgSkeet_Bitsream_12_130330_1909
      MD5: b3a6c21aaa23d44ba03b4e90085f1c1a
      ProgSkeet_12_130401_1824
      MD5: 49a8709c0dad599cce1ebb8d48cfa450
      ProgSkeet_12_130401_2010
      MD5: a146f8977fc954c2208ecf204609ff3a
      ProgSkeet_12_120402_1730 >> typo > should be > ProgSkeet_12_130402_1730
      MD5: 9d6d54c3871d99d86caf21196b624f6b

      Originally Posted by baileyscream
      i have 1 bitstream that you dont have.

      ProgSkeet_10_11_121101_1505.dat


      Initial release ^

      yet you have 3 before this first one ???
      thx bailey, pls do up um all if u want ( bitstreams/winskeets) complete collection whores we are

      7 bitstreams online or missing 1?

      the ProgSkeet_Bitsream_12_130330_1909 as first "fixed write nor" 1.2 bitstream released

      isn't this missing one for the 1.0/1.1 skeet? hence the progskeet_10_11xxxx.dat

      latest + solderless/solder support - only RY/BY required )
      ProgSkeet.1.0_1.1_Bitstreams_111106 ?

      Code:
      ProgSkeet.1.0_1.1_Bitstreams_111106.rar MD5:
      MD5: b9a269dd5deb83a0b74aa051bd549ccd
      the other one, ]ProgSkeet_10_11_121101_1505.dat does require "bridge" ry/by>gp04? but looks newer 121101 haha

      thx in advance for completing the pack baileyscream..

    246. Progskeet_Release
      04-12-2013
      12:04 PM
      246

      [MENTION=177623]baileyscream[/MENTION]
      No sorry I don't have the changelogs myself but when uf gets on I'll see if he has the time to upload to pastebin.

    247. baileyscream
      04-12-2013
      12:42 PM
      247

      Originally Posted by haz367
      isn't this missing one for the 1.0/1.1 skeet? hence the progskeet_10_11xxxx.dat
      that one was the one uf6667 released allong with the 1.1 to 1.2 conversion diagram.
      with this change log :-
      ProgSkeet 1.2 "Lite"
      --------------------

      You can now convert your old 1.0 (Limited White Edition) and 1.1 (Crystal Blue Edition) to 1.2 "Lite".
      "Lite" basically means that once the new architecture is implemented, it will lack the ability to run autonomously, because it lacks the serial flash.
      This can of course be added, but it won't be supported. Generating bitstreams for individual boards costs a lot of time which may very well be used in better areas (software and so on).


      1.2 "Lite" enables you to use dualboot. This is achieved by soldering a switch and an optional LED.
      The other feature is that you no longer need to switch between solderless bitstreams for NAND/NOR clips (these are not officially supported. If you have problems with these, please contact the 360 Clip team).
      There is nothing more to it. You do not get extra features.


      Setup
      -----
      so i will have to check it again as it is possible that it is for the 1.1 after it is converted

      this also would explain why when i update the 1.2 with this bitstream that i get a different fault:-

      no green light on the slave board (switch in either position) and not detected at all on pc

      the other bitstreams:-

      green light works on slave board (switch towards 15 pin zif socket) and not detected at all on pc.

      i have another laptop comming tonight / tomorrow so i will see if its my laptop or not. i hope it is my laptop.
      ************* [ - Post Merged - ] *************
      ok the progskeets that i now have + the known change logs

      Changelog
      ---------

      ProgSkeet_10_11_121101_1505.dat
      -------------------------------
      Initial release


      ProgSkeet_12_121018_0031.dat
      -------------------------------
      to be added


      ProgSkeet_12_121101_1223.dat
      -------------------------------
      to be added


      ProgSkeet_12_121106_2121.dat
      -------------------------------
      to be added



      ProgSkeet_12_130330_1909.dat
      ----------------------------
      + Increased metastability of USB (should no longer disconnect)

      + Restored Samsung Q compatibility that was caused by dualboot pin allocation


      ProgSkeet_12_130401_1824.dat
      ----------------------------
      + Added timeout for reads/writes (1ms), no more blocking

      + Fixed bug where it would read gpio from data pins rather than from gpio pins


      ProgSkeet_12_130401_2010.dat
      ----------------------------
      + Reduced timeout from 1.3ms down to 320ns per word


      ProgSkeet_12_130402_1730.dat
      ----------------------------
      + Added metastability to the DQ ports to filter out noise and glitches
      i am in the download section now so i will see if i can add these
      ************* [ - Post Merged - ] *************
      still cannot upload to the download section

      i get this:-

      Error 404 - Not Found





      The information you are looking for cannot be found. Please use the box below to assist in finding what you are looking for.


      -----------------------------------------------------------------------------
      all the bitstreams are here:-
      http://forum.dayton360mods.com/downl...hp?do=cat&id=6

      if someone can see if they can uplaoad these into the "other" download catagory as i cannot for some reason

    248. stuckintheskull
      04-12-2013
      01:13 PM
      248

      How about using Linux? Seems like it would help to do this manually rather than a windows program. Just trying to help. I have very little knowledge about this stuff but have been following this thread cause I'm getting a progskeet 1.2 today. If there's anything I can do to help I will.

      Sent from my Galaxy Nexus using Tapatalk 2

    249. haz367
      04-12-2013
      01:30 PM
      249

      Originally Posted by baileyscream
      that one was the one uf6667 released allong with the 1.1 to 1.2 conversion diagram.
      with this change log :-

      so i will have to check it again as it is possible that it is for the 1.1 after it is converted

      this also would explain why when i update the 1.2 with this bitstream that i get a different fault:-

      no green light on the slave board (switch in either position) and not detected at all on pc
      ah ok for 1.0/1.1 progskeets to "1.2 Lite" so they can dual boot
      this bitstream however IF programmed and not used for dual boot needs a resistor as it seems..

      http://www.progskeet.com/forum/viewtopic.php?f=9&t=4139

      then this one was an update for the 1.0/1.1 converts and also 1.2's ?
      ProgSkeet 1.2 Bitstream [121101.1223]
      http://www.progskeet.com/forum/viewtopic.php?f=9&t=4138

      dual boot, not so important, this shiiiiit however is confusing at times
      needs checking or..yep..brainfarts..

    250. sonyweb
      04-12-2013
      04:04 PM
      250

      Guys u wouldn't believe this,but I have to make it known;
      After trying the released bitstreams so far my PS v1.2 no longer dumps correctly.There will be lots of verification errors when dumping even when you revert back to the 2121 bitstream.So be warned.Don't ever write or flash any PS3 with these bitstreams.It is the duty of Progskeet Team to try their bitstreams before it is released.Two PS v1.2's are behaving like this so I can't be wrong.
      Been told not to flood this thread,but I have to make this observation known to everyone.Thanks

    251. Progskeet_Release
      04-12-2013
      04:09 PM
      251

      Originally Posted by sonyweb
      Guys u wouldn't believe this,but I have to make it known;
      After trying the released bitstreams so far my PS v1.2 no longer dumps correctly.There will be lots of verification errors when dumping even when you revert back to the 2121 bitstream.So be warned.Don't ever write or flash any PS3 with these bitstreams.It is the duty of Progskeet Team to try their bitstreams before it is released.Two PS v1.2's are behaving like this so I can't be wrong.
      Been told not to flood this thread,but I have to make this observation known to everyone.Thanks
      Or it could be your clip if your using one, powering fault or bad wiring.

    252. Sarah1331
      04-12-2013
      04:11 PM
      252

      Originally Posted by Progskeet_Release
      Or it could be your clip if your using one, powering fault or bad wiring.
      Oh yea not the skeet how did he dare insult the perfect product you come on here week ago releasing this **** and its done **** all and uf doesn't seem to have fixed **** all either why not pack it in now and all progskeet team fix up or **** off


      Sent from my iPhone 5 using Tapatalk 2

    253. sonyweb
      04-12-2013
      04:18 PM
      253

      Originally Posted by Progskeet_Release
      Or it could be your clip if your using one, powering fault or bad wiring.
      I don't use clips and its not powering or bad wiring.If u may want to know,I am a modder with 450+ nor PS3's downgrading experience so I know what I am saying.I am not sure u've tried these bitstreams before.

    254. baileyscream
      04-12-2013
      04:35 PM
      254

      Originally Posted by sonyweb
      Guys u wouldn't believe this,but I have to make it known;
      After trying the released bitstreams so far my PS v1.2 no longer dumps correctly.There will be lots of verification errors when dumping even when you revert back to the 2121 bitstream.So be warned.Don't ever write or flash any PS3 with these bitstreams.It is the duty of Progskeet Team to try their bitstreams before it is released.Two PS v1.2's are behaving like this so I can't be wrong.
      Been told not to flood this thread,but I have to make this observation known to everyone.Thanks
      you need to be sure about what is faulty.
      when you flash a bitstream injectus wipes the previous one first so there is no left over code.
      so if 1 bitstream acted in 1 way the first time it was installed then it should act in the same way the next time it is installed.

      so you need to re-check everything eg

      re-wire (if nor)

      check the clip (if nand) remember if its a nor clip then the clip needs a pin removing

      different usb cable

      if you have one then a different 15 pin ffc cable

      just need to be sure where the fault is.

      it is highly possible that the prog 1.2 is the problem.
      but dont just assume that others have the same / simuliar fault that they have checked propperly. you need to check everything

      alot of ppl have the same faults using the 1.1 but from expirience of using the 1.1 we can fault find better

      nobody has real expirience with the 1.2 yet.

      btw do you recall what bitstream you had installed when this fault started. this "may" be the pattern but i have a feeling its the 15 pin ffc. take alook at both ends does it look like the contacts are damaged with clipping / re-clipping?
      ************* [ - Post Merged - ] *************
      Originally Posted by sonyweb
      I don't use clips and its not powering or bad wiring.If u may want to know,I am a modder with 450+ nor PS3's downgrading experience so I know what I am saying.I am not sure u've tried these bitstreams before.
      geeze!! your as bad as sarah1331

      where do you guy's find time to do so many consoles?

    255. sonyweb
      04-12-2013
      05:04 PM
      255

      [MENTION=177623]baileyscream[/MENTION]
      I took every precaution when trying the bitstreams and have changed the 15 pin cable several times since I have five of them.Tried all bitstreams by wiring the skeet up and just flash the ps3 to verify whether they work as we were told to believe.I have a good dump of the ps3 using a E3 flasher and the ps v1.2 when it was on the 2121 bitstream.
      Now i can't get the progskeet to dump correctly anymore even as I have flashed the good dump back with the E3 flasher and the progskeet back on 2121 bitstream.
      ************* [ - Post Merged - ] *************
      I'm suspecting the flash or writing the ps3 with these bitstreams as the cause.

    256. baileyscream
      04-12-2013
      06:33 PM
      256

      Originally Posted by sonyweb
      [MENTION=177623]baileyscream[/MENTION]
      I took every precaution when trying the bitstreams and have changed the 15 pin cable several times since I have five of them.Tried all bitstreams by wiring the skeet up and just flash the ps3 to verify whether they work as we were told to believe.I have a good dump of the ps3 using a E3 flasher and the ps v1.2 when it was on the 2121 bitstream.
      Now i can't get the progskeet to dump correctly anymore even as I have flashed the good dump back with the E3 flasher and the progskeet back on 2121 bitstream.
      ************* [ - Post Merged - ] *************
      I'm suspecting the flash or writing the ps3 with these bitstreams as the cause.
      for me i used the pin headder board that comes with the nor clip.
      i soldered wires from that to the ps3 then connected the pin headder to prog 1.1 via the ffc and did a dump. checked it ect.
      my plan here was to swap prog 1.1 with 1.2 and do a new dump.
      this way i know it isnt bad soldering or loose wires as if i got a bad dump i could just put 1.1 back on to re-dump to test.

      are you doing the same sort of thing?

      thisis so annoying with mine not even being detected. i simply cannot give my best help with this


      ----------------------------------------------------------------
      if anyone in the uk is following this thread and has a prog 1.2 would you mind lending me the slave board and 15 pin ribbon.
      would really like to know if its just one of them thats faulty on mine

    257. baileyscream
      04-13-2013
      05:07 AM
      257

      [MENTION=269704]Progskeet_Release[/MENTION]
      my brother has dropped off his laptop and it detects the progskeet 1.2
      now as his laptop is for his job i cannot go any further with this on his.

      so just to round this up

      eeepc with winxp 32 x wont detect the progskeet 1.2. it will work with progskeet 1.1

      acer 5763 windows 64x will detect progskeet 1.2

      i wiped and did a full freash install on the eeepc as it wouldnt detect the injectus before.

      so this has to be a pc fault somewhere

      i will spend this weekend putting win 7 on it and then i can see if that works.

      if it doesnt then it must be a hardware issue

      could you see if uf6667 needs any info from this pc before i wipe it and put win 7 on.

      [MENTION=10135]sonyweb[/MENTION] or anyone else

      are you using the same pc that you have the prog 1.1 installed to?
      also are you using the same usb port?

      just trying to rule out that it isnt the driver for prog 1.1 that is interfeering with the prog 1.2

    258. haz367
      04-13-2013
      05:13 AM
      258

      Originally Posted by Progskeet_Release
      Or it could be your clip if your using one, powering fault or bad wiring.
      or it could be ... or this...or that...wait lemme switch USB cables, that must be it


      yeah what a joke right

      1.1 conversion and forgetting this mess


      have fun..

    259. Progskeet_Release
      04-13-2013
      05:41 AM
      259

      [MENTION=177623]baileyscream[/MENTION]
      Been trying to get in touch with him through irc but he hasn't been on and sent him emails but no response atm.
      I'll just put everything you've found out so far into an email and hope he notices it

    260. 3absiso
      04-13-2013
      05:43 AM
      260

      Originally Posted by Progskeet_Release
      Been trying to get in touch with him through irc but he hasn't been on and sent him emails but no response atm.
      I'll just put everything you've found out so far into an email and hope he notices it
      Why did you put your self in this situation

    261. sonyweb
      04-13-2013
      05:50 AM
      261

      Originally Posted by baileyscream
      [MENTION=269704]Progskeet_Release[/MENTION]
      my brother has dropped off his laptop and it detects the progskeet 1.2
      now as his laptop is for his job i cannot go any further with this on his.

      so just to round this up

      eeepc with winxp 32 x wont detect the progskeet 1.2. it will work with progskeet 1.1

      acer 5763 windows 64x will detect progskeet 1.2

      i wiped and did a full freash install on the eeepc as it wouldnt detect the injectus before.

      so this has to be a pc fault somewhere

      i will spend this weekend putting win 7 on it and then i can see if that works.

      if it doesnt then it must be a hardware issue

      could you see if uf6667 needs any info from this pc before i wipe it and put win 7 on.

      [MENTION=10135]sonyweb[/MENTION] or anyone else

      are you using the same pc that you have the prog 1.1 installed to?
      also are you using the same usb port?

      just trying to rule out that it isnt the driver for prog 1.1 that is interfeering with the prog 1.2
      I use zadig to install winusb v6.1.7600.16385.Thinks that is what works for the ps v1.2.

    262. baileyscream
      04-13-2013
      05:53 AM
      262

      Originally Posted by Progskeet_Release
      [MENTION=177623]baileyscream[/MENTION]
      Been trying to get in touch with him through irc but he hasn't been on and sent him emails but no response atm.
      I'll just put everything you've found out so far into an email and hope he notices it
      ok thanks.

      i have been in irc but never seen him active in there.
      ************* [ - Post Merged - ] *************
      Originally Posted by sonyweb
      I use zadig to install winusb v6.1.7600.16385.Thinks that is what works for the ps v1.2.
      but you do have drivers for both your prog 1.1 and 1.2 installed?

      or dont you have 1.1 on the same pc as the 1.2?

    263. sonyweb
      04-13-2013
      06:07 AM
      263

      [MENTION=177623]baileyscream[/MENTION]
      WinUsb v6.1.7600... works for both progskeet versions.

    264. Progskeet_Release
      04-13-2013
      06:42 AM
      264

      Originally Posted by baileyscream
      ok thanks.

      i have been in irc but never seen him active in there.
      ************* [ - Post Merged - ] *************


      but you do have drivers for both your prog 1.1 and 1.2 installed?

      or dont you have 1.1 on the same pc as the 1.2?
      He is normally on around this time
      9am-4pm GMT

      @3abiso
      Put myself in what situation lol, I don't mind passing on info to him.

    265. 3absiso
      04-13-2013
      06:47 AM
      265

      Originally Posted by Progskeet_Release
      Put myself in what situation lol, I don't mind passing on info to him.
      I like your spirit
      we just wanted someone to throw our ProgSkeet V1.2 Anger, and you were in the front

    266. baileyscream
      04-14-2013
      05:35 AM
      266

      putting 2 threads together

      from here:-
      http://www.ps3hax.net/showthread.php...496#post577496

      Originally Posted by mudnewfie
      ok this cant be right. I had all the drivers installed for the injectus and progskeet the injectus works only I keep getting that ff ff ff ff ff ff ff 00 ff when programeing the progskeet . but for some reason every time I hook up the progskeet with the slave board I get this device has malfunctioned and the drivers are gone and I cant reinstall them. and winskeet don't see it wtf
      right your at the exact same point i am at now.
      i thought this was just me.
      now the first time i programed the prog 1.2 i had correct reading in slog
      then i thought i best start with the first bitstreem first and work my way up as i experiment to find the best way to get it working.

      when i programed the first initial release bitstreem i got the same as you in slog
      i tried to install the prog with slave and i get the same error as you in windows.

      also no matter what bitstreem i load it gives the same slog message (all FF FF etc)
      and same error when plugging it in to pc.

      if i plug the prog into my bro's pc it is detected propperly. (no drivers installed though. it just detects and then starts looking for driver)

      i have now removed win xp and re-installed win 7 32x
      updated it etc

      i put prog 1.2 in and it is detected
      i direct it to the driver and as it starts to install i get the message that the usb device has malfunctioned again.

      no matter what bitstreem i use (and it still gives the slog FF FF etc with all) it still wont work via slave.

      i am going to try erasing then updating the bitstreem
      i will let you know how i get on

    267. haz367
      04-14-2013
      05:48 AM
      267

      " ff ff ff ff ff ff ff 00 ff when programming the progskeet"

      it's normal right?! we all get it as posted earlier...although mine works/detects fine on Win7 32bit, only weird that it gives FF's instead of another value as on the 1.0 though, maybe that's the reason..thx for all tips on settings/drivers used

      the only thing on mine was that small switch on the slaveboard at first, fixed it and bright led again..

    268. baileyscream
      04-14-2013
      06:21 AM
      268

      first time i programed the 1.2 i had info in there not the FF FF FF etc in slog

    269. stuckintheskull
      04-14-2013
      11:06 AM
      269

      I just programmed my 1.2 progskeet using latest bitstream and all went fine. I was able to get drivers I stalled for my progskeet but as soon as I open winskeet to check for shorts I get "device not detected". Not sure where to go from here. I'm using windows 7 64bit
      Sent from my Galaxy Nexus using Tapatalk 2

    270. baileyscream
      04-14-2013
      12:15 PM
      270

      Originally Posted by stuckintheskull
      I just programmed my 1.2 progskeet using latest bitstream and all went fine. I was able to get drivers I stalled for my progskeet but as soon as I open winskeet to check for shorts I get "device not detected". Not sure where to go from here. I'm using windows 7 64bit
      Sent from my Galaxy Nexus using Tapatalk 2
      i dont suppose you noticed if you had the FF FF FF etc in slog while updating the bitstream with infectus did you?

      and un-plug the prog / re-start pc / replug in the prog

      it should connect propperly and get detected this was common with the prog 1.1

    271. haz367
      04-14-2013
      12:33 PM
      271

      Originally Posted by stuckintheskull
      as I open winskeet to check for shorts I get "device not detected".2
      this can also be the driver+winskeet version..

      libusb+WinSkeet40000_111004
      winusb+Winskeet111120/Winskeet111205

      libusb driver+Winskeet111205 = device not detected

    272. 4DoorITR
      04-14-2013
      12:42 PM
      272

      To all getting "device not detected" make sure the 1.2 is grounded and the 3.3v line is not connected to the PS3. 3.3v can't be wired to anything in order to program.

    273. sonyweb
      04-14-2013
      12:44 PM
      273

      Originally Posted by stuckintheskull
      I just programmed my 1.2 progskeet using latest bitstream and all went fine. I was able to get drivers I stalled for my progskeet but as soon as I open winskeet to check for shorts I get "device not detected". Not sure where to go from here. I'm using windows 7 64bit
      Sent from my Galaxy Nexus using Tapatalk 2
      Use the latest Winskeet111205 and install winusb(v6.1.7600.16385) with the zadig application.
      It works for me on win7 32bit but u can have a try at it.

    274. 4DoorITR
      04-14-2013
      12:44 PM
      274

      Originally Posted by baileyscream
      i dont suppose you noticed if you had the FF FF FF etc in slog while updating the bitstream with infectus did you?
      This is normal for mine.

    275. stuckintheskull
      04-14-2013
      01:05 PM
      275

      Originally Posted by haz367
      this can also be the driver+winskeet version..

      libusb+WinSkeet40000_111004
      winusb+Winskeet111120/Winskeet111205

      libusb driver+Winskeet111205 = device not detected
      I do have libusb+winskeet 40000_111004. I will try winusb in a bit. How should I go about getting winusb?

      Sent from my Galaxy Nexus using Tapatalk 2

    276. baileyscream
      04-14-2013
      01:19 PM
      276

      ok i give up
      my bro has let me try to install this on his
      it found the device started searching then it gave me this befor it installed anything



      so thats 2 computers and this prog wont work on either

    277. sonyweb
      04-14-2013
      01:49 PM
      277

      Originally Posted by baileyscream
      ok i give up
      my bro has let me try to install this on his
      it found the device started searching then it gave me this befor it installed anything



      so thats 2 computers and this prog wont work on either
      Maybe u have the batch of progskeet with the badly placed regulators.Check PS3dev wiki for more info on ur 1.2.

    278. haz367
      04-14-2013
      02:24 PM
      278

      Originally Posted by stuckintheskull
      I do have libusb+winskeet 40000_111004. I will try winusb in a bit. How should I go about getting winusb?

      Sent from my Galaxy Nexus using Tapatalk 2
      then it should get detected with that combo..
      winusb driver is used with latest winskeet


      use zadig.exe to switch the driver

      then it's what 4DoorITR posted = the 3.3v line if already wired up..
      ************* [ - Post Merged - ] *************










    279. underwurlde
      04-14-2013
      02:34 PM
      279

      Originally Posted by sonyweb
      Maybe u have the batch of progskeet with the badly placed regulators.Check PS3dev wiki for more info on ur 1.2.
      Have you got a link to that please? Can't seem to find that ref.

      TIA

      Andy

    280. baileyscream
      04-14-2013
      02:39 PM
      280

      Originally Posted by sonyweb
      Maybe u have the batch of progskeet with the badly placed regulators.Check PS3dev wiki for more info on ur 1.2.
      it gives exacly the same error if i plug in just the slave board
      can you plug in just your slave and see if it is still detected as progskeet

      and regulators?
      there is only one on the main prog board and the points under it i have checked and they were not shorting so unless its the same under the reg on the slave board then i have no idea.

      the capacitors that can be set wrong at factory are all ok. first thing i checked

      i'm just at a loss.

      if you can just see what happens by plugging in just the slave for me then i can go from there

    281. haz367
      04-14-2013
      02:45 PM
      281

      for detecting problems with injectus, it seems to be a U4 short problem


      http://www.ps3devwiki.com/wiki/Progs...off.29_Quality

    282. baileyscream
      04-14-2013
      02:50 PM
      282

      Originally Posted by haz367
      for detecting problems with injectus, it seems to be a U4 short problem


      http://www.ps3devwiki.com/wiki/Progs...off.29_Quality
      yep
      but its a problem of the progskeet its self not being detected by the pc via the slave board after bitstream update.

    283. underwurlde
      04-14-2013
      02:50 PM
      283

      ^ yes 1 regulator but the OPTION to fit either a high-powered one (SOT-223) or a smaller low powered one (SOT23-5). The PCB is designed such that the footprint of the smaller device sits inside the larger one (nothing wrong with that idea if one wants to save space but at the loss of potential heat-sinking). The idea I guess was cost reduction if the smaller one could be used.

      Andy

    284. stuckintheskull
      04-14-2013
      02:54 PM
      284

      Could someone post a zadig.exe file for me? Having trouble finding it for some reason. Its driving me nuts. Thanks

      Sent from my Galaxy Nexus using Tapatalk 2

    285. baileyscream
      04-14-2013
      03:01 PM
      285

      Originally Posted by underwurlde
      ^ yes 1 regulator but the OPTION to fit either a high-powered one (SOT-223) or a smaller low powered one (SOT23-5). The PCB is designed such that the footprint of the smaller device sits inside the larger one (nothing wrong with that idea if one wants to save space but at the loss of potential heat-sinking). The idea I guess was cost reduction if the smaller one could be used.

      Andy
      i understand that
      i dont get why they still soilder the pads though if there not going to use them as it looks like when they work the board the larger reg pushes the solder below it and they join the pads.

      i wonder if its the same on the slave board reg?

      just tries plugging it in again and it detected then started looking for a driver then once again changed to say "usb device malfunctioned"
      so i wonder if it is something happening as it starts to get hot?
      but everything feels cold.

      andy can you plug in just your slave board (not connected to progskeet) and see if its detected
      ************* [ - Post Merged - ] *************
      Originally Posted by underwurlde
      ^ yes 1 regulator but the OPTION to fit either a high-powered one (SOT-223) or a smaller low powered one (SOT23-5). The PCB is designed such that the footprint of the smaller device sits inside the larger one (nothing wrong with that idea if one wants to save space but at the loss of potential heat-sinking). The idea I guess was cost reduction if the smaller one could be used.

      Andy
      i understand that
      i dont get why they still soilder the pads though if there not going to use them as it looks like when they work the board the larger reg pushes the solder below it and they join the pads.

      i wonder if its the same on the slave board reg?

      just tried plugging it in again and it detected then started looking for a driver then once again changed to say "usb device malfunctioned"
      so i wonder if it is something happening as it starts to get hot?
      but everything feels cold.

      andy can you plug in just your slave board (not connected to progskeet) and see if its detected

    286. haz367
      04-14-2013
      03:16 PM
      286

      Originally Posted by stuckintheskull
      Could someone post a zadig.exe file for me? Having trouble finding it for some reason. Its driving me nuts. Thanks

      Sent from my Galaxy Nexus using Tapatalk 2
      zadig.exe
      MD5: b922c876f5485cf664f73c412e725b55
      http://rghost.net/45296905

      [MENTION=177623]baileyscream[/MENTION]

      ofcourse only "slaveboard" isnt reconised if connected without progskeet =
      unknown device+no gr led on switch slaveboard...tested

    287. baileyscream
      04-14-2013
      03:26 PM
      287

      Originally Posted by haz367
      zadig.exe
      MD5: b922c876f5485cf664f73c412e725b55
      http://rghost.net/45296905

      [MENTION=177623]baileyscream[/MENTION]

      ofcourse only "slaveboard" isnt reconised if connected without progskeet =
      unknown device+no gr led on switch slaveboard...tested
      thats what i wanted to know.

      so the prob is the main board and i dont need to mess about with the slave board.

      the slave led comes on when connected to the prog btw

    288. 4DoorITR
      04-14-2013
      04:37 PM
      288

      Did you try grounding it as I said in a previous post?

    289. underwurlde
      04-14-2013
      05:31 PM
      289

      Originally Posted by baileyscream
      i understand that
      I don't get why they still solder the pads though if there not going to use them as it looks like when they work the board the larger reg pushes the solder below it and they join the pads.
      Therein lies another design fault with this PCB (apart from the bank of decoupling capacitors having been placed too close to one another).
      The boards are machine populated. The solder is placed on a panel of PCBs using a solder paste. This paste is placed (a bit like silk screen printing) using a solder paste mask - a very thin sheet of metal with holes chemically etched into it. The mask is placed over the panel of PCBs and the solder paste wiped over it. Thus everything that is exposed gets solder.

      As you have seen, their 'mistake' was to not use TWO paste masks instead of one. Hence if the larger SOT-223 regulator is placed it will squidge down the solder placed for the SOT23-5 device potentially creating shorts. Ooops.

      i wonder if its the same on the slave board reg?
      Yes

      so i wonder if it is something happening as it starts to get hot?
      The regulator? And not wired to a PS3 etc? Should NOT get 'hot', warm perhaps, but not hot. Does the 3.3V reg on the slave board get hot too? (Should do). Test using a meter. Do you get 3.3V and 1.8V (reg on the ProgSkeet).

      the slave led comes on when connected to the prog btw
      Now that's interesting. Says to me things are working. The switch on the slave board goes (via the ribbon cable) to a pin on the FPGA. Like-wise another pin on the FPGA goes (again, via the ribbon cable) to the green LED on the slave board. Therefore you must have a working FPGA with a working BitStream on it to be able to turn that Green LED on & off using the switch on the Slave board...

      Hmmm. Food for thought?

      Andy

    290. stuckintheskull
      04-14-2013
      07:44 PM
      290

      Well I'm still having problems with winskeet detecting my device. Tried installing drivers and two different winskeets and nothing. Everything else seemed to go fine up until this point. Any suggestions? Maybe solder the wires manually?

      Sent from my Galaxy Nexus using Tapatalk 2

    291. Sarah1331
      04-15-2013
      06:35 AM
      291

      Can someone confirm a working butstream for the 1.2 that works for nands not bothered about nor just NAND please


      Sent from my iPhone 5 using Tapatalk 2

    292. lcmj7416
      04-15-2013
      07:30 AM
      292

      Originally Posted by Sarah1331
      Can someone confirm a working butstream for the 1.2 that works for nands not bothered about nor just NAND please


      Sent from my iPhone 5 using Tapatalk 2
      I tested all those new bitstreams with 2 boards, 2 nand each. None works...
      I cant even get one single dump, winskeet detects nand type but dump wont go further than block 0

    293. Sarah1331
      04-15-2013
      07:35 AM
      293

      Originally Posted by lcmj7416
      I tested all those new bitstreams with 2 boards, 2 nand each. None works...
      I cant even get one single dump, winskeet detects nand type but dump wont go further than block 0
      What about prior to these realease


      Sent from my iPhone 5 using Tapatalk 2

    294. lcmj7416
      04-15-2013
      07:43 AM
      294

      Originally Posted by Sarah1331
      What about prior to these realease


      Sent from my iPhone 5 using Tapatalk 2
      with bitstream 2121 I could get valid dumps, not anymore even if I get back to 2121...strange isnt it?

    295. baileyscream
      04-15-2013
      09:05 AM
      295

      Originally Posted by 4DoorITR
      Did you try grounding it as I said in a previous post?
      nope i missed that post somehow
      what did you suggest to ground?
      ************* [ - Post Merged - ] *************
      Originally Posted by underwurlde
      Therein lies another design fault with this PCB (apart from the bank of decoupling capacitors having been placed too close to one another).
      The boards are machine populated. The solder is placed on a panel of PCBs using a solder paste. This paste is placed (a bit like silk screen printing) using a solder paste mask - a very thin sheet of metal with holes chemically etched into it. The mask is placed over the panel of PCBs and the solder paste wiped over it. Thus everything that is exposed gets solder.
      so a stencil then. just like when you reball a bga

      As you have seen, their 'mistake' was to not use TWO paste masks instead of one. Hence if the larger SOT-223 regulator is placed it will squidge down the solder placed for the SOT23-5 device potentially creating shorts. Ooops.
      yep real pain now to fault find as i need to check "possible" fault that i cannot see lol

      The regulator? And not wired to a PS3 etc? Should NOT get 'hot', warm perhaps, but not hot. Does the 3.3V reg on the slave board get hot too? (Should do). Test using a meter. Do you get 3.3V and 1.8V (reg on the ProgSkeet).
      hmm change getting hot to warming up. i have noticed that if left plugged in the under side (below the actel chip) gets warm but the chip its self feels cold. so not sure if there is something between the layers that is not connected right making resistance and heat. but if its just tracks then this wont be the reason.

      slave board = 5.06v leg / 3.283v leg / gnd leg .... then the top tag = 3.283v

      main board = 3.238v leg / 1.563v leg / gnd leg .... then the top tag = 1.563

      (done with a FLUKE meter)

      Now that's interesting. Says to me things are working. The switch on the slave board goes (via the ribbon cable) to a pin on the FPGA. Like-wise another pin on the FPGA goes (again, via the ribbon cable) to the green LED on the slave board. Therefore you must have a working FPGA with a working BitStream on it to be able to turn that Green LED on & off using the switch on the Slave board...

      Hmmm. Food for thought?

      Andy
      the ProgSkeet_12_130411_1041.dat bitstream installed i get the same error but no led. dont know what he changed though.
      i take it you picked that one up last night?
      if you did you could see if the led works on yours or not.

      btw if i plug in just the slave board it takes 3 seconds to get detected as "usb malfunctioned"

      if i plug in the slave board while its connected to the main board it takes 30 seconds

      if i plug it in using a dubble usb to single mini usb then it takes 5 seconds

    296. Sarah1331
      04-15-2013
      10:37 AM
      296

      [MENTION=269704]Progskeet_Release[/MENTION]

      Guess NAND 2 will never flash on its own or as a batch

      Got to admit its a bit of a let down


      Sent from my iPhone 5 using Tapatalk 2

    297. 4DoorITR
      04-15-2013
      01:18 PM
      297

      Originally Posted by Sarah1331
      Can someone confirm a working butstream for the 1.2 that works for nands not bothered about nor just NAND please


      Sent from my iPhone 5 using Tapatalk 2
      I've been using 121018.31 with no issues. Just make sure you have the switch on the slave board in the correct position.

    298. baileyscream
      04-15-2013
      02:08 PM
      298

      [MENTION=269704]Progskeet_Release[/MENTION]
      new link for your main post
      http://www.ps3hax.net/downloads.php?do=file&id=799

      <uf6667>: nand and nor
      <uf6667>: nor CONFIRMED working perfect
      <uf6667>: if someone's eager to test nand, this is the one

    299. 3absiso
      04-15-2013
      02:25 PM
      299

      Originally Posted by baileyscream
      <uf6667>: https://dl.dropboxusercontent.com/u/...30415_2058.rar
      <uf6667>: nand and nor
      <uf6667>: nor CONFIRMED working perfect
      <uf6667>: if someone's eager to test nand, this is the one
      So is it confirmed Baily to work on Nor, or what

    300. baileyscream
      04-15-2013
      02:39 PM
      300

      Originally Posted by 3absiso
      So is it confirmed Baily to work on Nor, or what
      not by me
      i carnt even confirm the progskeat 1.2 will install on a pc

      i have sat in irc most of the day today and i have seen no one else post about it.
      so where ever this confirmation is i ave no idea.

      but that is not to say it isnt true.

      i think the guy's on here will soon tell us if its working or not

      [MENTION=10135]sonyweb[/MENTION] perhaps?

    301. Sarah1331
      04-15-2013
      02:44 PM
      301

      I could test in seconds if I had one with my adaptor
      100% as there's no wires or power issues to mix in just
      Progskeet 50way FPC and a nor chip

      If anyone wants to donate for testing you shal get it back


      Sent from my iPhone 5 using Tapatalk 2

    302. sonyweb
      04-15-2013
      04:38 PM
      302

      Originally Posted by baileyscream
      not by me
      i carnt even confirm the progskeat 1.2 will install on a pc

      i have sat in irc most of the day today and i have seen no one else post about it.
      so where ever this confirmation is i ave no idea.

      but that is not to say it isnt true.

      i think the guy's on here will soon tell us if its working or not

      [MENTION=10135]sonyweb[/MENTION] perhaps?
      Will try but not until there is official confirmation through video proof this time.
      Have lost 2 through this piggy testing.They no longer dump correctly.

    303. Sarah1331
      04-15-2013
      04:44 PM
      303

      Originally Posted by sonyweb
      Will try but not until there is official confirmation through video proof this time.
      Have lost 2 through this piggy testing.They no longer dump correctly.
      Are you uk maybe I can help


      Sent from my iPhone 5 using Tapatalk 2

    304. sonyweb
      04-15-2013
      04:48 PM
      304

      Originally Posted by Sarah1331
      Are you uk maybe I can help


      Sent from my iPhone 5 using Tapatalk 2
      Nope,I'm too far from uk anyway.

    305. baileyscream
      04-15-2013
      07:07 PM
      305

      the new bitsream is split into 2
      one for nand
      one for nor
      the nor should now detect cfi
      the nand has improved read / write via clip

      uf6667 will be keeping them as 2 bitstreams after i suggested it will be better like that and he's going to add dual nand back into the bitstream seeing as keeping them seperate allows more room.

      hopefully this will also allow more improvements to the nor bitstream.

      now my prog is comfirmed faulty so i will try to help the best i can but i am at a stand still untill i get a replacement.
      then i really can start testing and getting everyone what they want. a guide to successfully use the bleeding thing

    306. 4DoorITR
      04-15-2013
      10:24 PM
      306

      Originally Posted by baileyscream
      nope i missed that post somehow
      what did you suggest to ground?
      Progskeet to PS3 board and/or common GND of power mains.

      I'll test this bitstream on a NOR tomorrow.

    307. underwurlde
      04-16-2013
      03:04 AM
      307

      [MENTION=177623]baileyscream[/MENTION]:

      slave board = 5.06v leg / 3.283v leg / gnd leg .... then the top tag = 3.283v
      main board = 3.238v leg / 1.563v leg / gnd leg .... then the top tag = 1.563
      5V in and 3.3V out, voltage measurements are good.
      However, for the regulator on the ProgSkeet, 3.3V and 1.563V out seems a little on the low side to me, should be 1.8V and hence as you suspect, *something* may be dragging this line down resulting in a warm spot.

      As to WHY this is an entirely different matter. This has got me scratching my head. It cannot be a direct short on the PCB causing this. I wonder if a 'bad' BitStream could damage the FPGA. But if were possible and the FPGA damaged as a result then IT would get hot and not the PCB as you've mentioned.

      Weirdness abounds!

      Andy

    308. sonyweb
      04-16-2013
      03:21 AM
      308

      Originally Posted by baileyscream
      the new bitsream is split into 2
      one for nand
      one for nor
      the nor should now detect cfi
      the nand has improved read / write via clip

      uf6667 will be keeping them as 2 bitstreams after i suggested it will be better like that and he's going to add dual nand back into the bitstream seeing as keeping them seperate allows more room.

      hopefully this will also allow more improvements to the nor bitstream.

      now my prog is comfirmed faulty so i will try to help the best i can but i am at a stand still untill i get a replacement.
      then i really can start testing and getting everyone what they want. a guide to successfully use the bleeding thing


      CFI dumps correctly with this bitstream.Here one from a DYN-001 samsung Q;

      [2013-04-16T07:59:05] Decoding CFI
      [2013-04-16T07:59:05] - VCC = 2.7V - 3.6V
      [2013-04-16T07:59:05] - VPP = NA
      [2013-04-16T07:59:05] - Timeout per word program = 8us
      [2013-04-16T07:59:05] - Timeout for minimum buffer write = NA
      [2013-04-16T07:59:05] - Timeout per individual block erase = 512ms
      [2013-04-16T07:59:05] - Timeout for full chip erase = NA
      [2013-04-16T07:59:05] - Maximum timeout per word program = 128us
      [2013-04-16T07:59:05] - Maximum timeout for write buffer = NA
      [2013-04-16T07:59:05] - Maximum timeout per block erase = 8s
      [2013-04-16T07:59:05] - Maximum timeout for full chip erase = NA
      [2013-04-16T07:59:05] - Device size = 8MiB (8388608)
      [2013-04-16T07:59:05] - Maximum number of bytes for buffered write = 1
      [2013-04-16T07:59:05] - Flash device interface code description = 16bits only
      [2013-04-16T07:59:05] - Number of erase block regions = 3
      [2013-04-16T07:59:05] - Region 1
      [2013-04-16T07:59:05] - Region 1 number of erase blocks = 8
      [2013-04-16T07:59:05] - Region 1 block size = 8Kbyte
      [2013-04-16T07:59:05] - Region 2
      [2013-04-16T07:59:05] - Region 2 number of erase blocks = 126
      [2013-04-16T07:59:05] - Region 2 block size = 64Kbyte
      [2013-04-16T07:59:05] - Region 3
      [2013-04-16T07:59:05] - Region 3 number of erase blocks = 8
      [2013-04-16T07:59:05] - Region 3 block size = 8Kbyte
      [2013-04-16T07:59:05] Finished

      Thanks.

    309. Sarah1331
      04-16-2013
      03:41 AM
      309

      2 bitstreams lol Andy the Phoenix lives


      Sent from my iPhone 5 using Tapatalk 2

    310. baileyscream
      04-16-2013
      04:37 AM
      310

      Originally Posted by Sarah1331
      2 bitstreams lol Andy the Phoenix lives


      Sent from my iPhone 5 using Tapatalk 2
      is the phoenix the 1.2 - 1.1 conversion?

      i'm lost with all these boards poor andy keeps making for someone

    311. baileyscream
      04-16-2013
      07:31 AM
      311

      update and info
      http://progskeet.com/forum/viewtopic.php?f=13&t=109417

    312. underwurlde
      04-16-2013
      07:53 AM
      312

      Originally Posted by Sarah1331
      2 bitstreams lol Andy the Phoenix lives
      Mwwah-hah-hah-haaarrr!

      Originally Posted by BaileyScream
      is the phoenix the 1.2 - 1.1 conversion?
      The Phoenix II is, yes.

    313. zeruel85
      04-16-2013
      08:12 AM
      313

      I tested my ProgSkeet 1.2 with zif socket nand. Bitstream: 130415-2019 (only for nand).

      It works very good.

      Time to dump (without verify enabled) --> 02:53 (minutes:seconds)
      Time to flash (without verify enabled) --> 06:16

      Obviously, even if the verify was disabled, I compared my dumps each others, and also I redumped after flashing, to verify that all the files were the same.

      It is 3 seconds faster than the 121101-1223 for dumping, and 5 seconds faster for flashing.

    314. baileyscream
      04-16-2013
      04:39 PM
      314

      <uf6667>: WinSkeet40000_130416_2305 <- in case anyone wants to try

    315. 4DoorITR
      04-16-2013
      07:25 PM
      315

      I can confirm it dumps CFI now also.


      [2013-04-16T21:52:00] Decoding CFI
      [2013-04-16T21:52:00] - VCC = 2.7V - 3.6V
      [2013-04-16T21:52:00] - VPP = NA
      [2013-04-16T21:52:00] - Timeout per word program = 128us
      [2013-04-16T21:52:00] - Timeout for minimum buffer write = 128us
      [2013-04-16T21:52:00] - Timeout per individual block erase = 1024ms
      [2013-04-16T21:52:00] - Timeout for full chip erase = NA
      [2013-04-16T21:52:00] - Maximum timeout per word program = 1024us
      [2013-04-16T21:52:00] - Maximum timeout for write buffer = 4096us
      [2013-04-16T21:52:00] - Maximum timeout per block erase = 16s
      [2013-04-16T21:52:00] - Maximum timeout for full chip erase = NA
      [2013-04-16T21:52:00] - Device size = 16MiB (16777216)
      [2013-04-16T21:52:00] - Maximum number of bytes for buffered write = 32
      [2013-04-16T21:52:00] - Flash device interface code description = 8bits/16bits
      [2013-04-16T21:52:00] - Number of erase block regions = 1
      [2013-04-16T21:52:00] - Region 1
      [2013-04-16T21:52:00] - Region 1 number of erase blocks = 128
      [2013-04-16T21:52:00] - Region 1 block size = 128Kbyte
      [2013-04-16T21:52:00] Finished

    316. sonyweb
      04-17-2013
      01:43 AM
      316

      [MENTION=234602]4DoorITR[/MENTION],have flashed ur nor with this bitstream yet?
      I'm afraid to go ahead with mine,since I have two progskeets behaving weirdly after several write operations with the previous bitstreams.

    317. uf6667
      04-17-2013
      02:35 AM
      317

      Originally Posted by sonyweb
      [MENTION=234602]4DoorITR[/MENTION],have flashed ur nor with this bitstream yet?
      I'm afraid to go ahead with mine,since I have two progskeets behaving weirdly after several write operations with the previous bitstreams.
      really? there's nothing to lose, seeing as the bitstream can never permanently change anything

    318. 3absiso
      04-17-2013
      03:45 AM
      318

      Originally Posted by uf6667
      really? there's nothing to lose, seeing as the bitstream can never permanently change anything
      Good to see you post here,
      i think this means one thing.
      ProgSkeet V1.2 is a bout to be fully working. 2nshalah
      i do not know what happened with you along the way and how things missed up for you.but you should made a public statement for all ProgSkeet customers (me among them) to clear the issue.
      but glad you are back on track,
      hope more conformations on the way,

    319. sonyweb
      04-17-2013
      03:53 AM
      319

      Originally Posted by uf6667
      really? there's nothing to lose, seeing as the bitstream can never permanently change anything
      Sure????
      I do nor downgrading a lot so just want to be sure the v1.2 can stand enough write operations,otherwise will sell the rest three I have.
      Losing a flasher after a just a few usage should be of concern to any modder.
      ************* [ - Post Merged - ] *************
      Originally Posted by 3absiso
      Good to see you post here,
      i think this means one thing.
      ProgSkeet V1.2 is a bout to be fully working. 2nshalah
      i do not know what happened with you along the way and how things missed up for you.but you should made a public statement for all ProgSkeet customers (me among them) to clear the issue.
      but glad you are back on track,
      hope more conformations on the way,
      He's always around monitoring ps v1.2 threads everywhere but does'nt want to show up and face our anger at their progskeet issue.
      Anyway,happy he is back and should'nt 'vanish' again when there is problem with any product from them.

    320. baileyscream
      04-17-2013
      05:55 AM
      320

      Originally Posted by sonyweb
      Sure????
      I do nor downgrading a lot so just want to be sure the v1.2 can stand enough write operations,otherwise will sell the rest three I have.
      Losing a flasher after a just a few usage should be of concern to any modder.
      ************* [ - Post Merged - ] *************


      He's always around monitoring ps v1.2 threads everywhere but does'nt want to show up and face our anger at their progskeet issue.
      Anyway,happy he is back and should'nt 'vanish' again when there is problem with any product from them.
      you have a good dump so you need to write it back with the v1.2. this is the only way to see if its working propperly now.
      if it does then do it again on another ps3.
      your in a good position to really work the v1.2 out propperly.
      the same with anyone else that does alot of downgrading.

      uf6667 will look into advice and feedback from them that do alot of downgrades more seriously then the one off downgrader as you will have more expirience to know more about how to use the flasher than the new guy.
      and with that it will be less likely to be a user fault (ie bad wiring)

      also if the flasher only lasts a few read / write commands then you really need that issue sorting out asap. so get using it work that sucker out

    321. sonyweb
      04-17-2013
      10:58 AM
      321

      Originally Posted by baileyscream
      you have a good dump so you need to write it back with the v1.2. this is the only way to see if its working propperly now.
      if it does then do it again on another ps3.
      your in a good position to really work the v1.2 out propperly.
      the same with anyone else that does alot of downgrading.

      uf6667 will look into advice and feedback from them that do alot of downgrades more seriously then the one off downgrader as you will have more expirience to know more about how to use the flasher than the new guy.
      and with that it will be less likely to be a user fault (ie bad wiring)

      also if the flasher only lasts a few read / write commands then you really need that issue sorting out asap. so get using it work that sucker out

      Have wired up a third ps v1.2(i.e solder wire to skeet pins),but would like to know if anyone has been able to downgrade nor with the latest bitstream(the one that could dump the nor CFI correctly) ?

    322. baileyscream
      04-17-2013
      11:23 AM
      322

      Originally Posted by sonyweb
      Have wired up a third ps v1.2(i.e solder wire to skeet pins),but would like to know if anyone has been able to downgrade nor with the latest bitstream(the one that could dump the nor CFI correctly) ?
      i know off 3 ppl that have said they have.
      but to be honest you have other flashers so if you fail with the 1.2 then you can simply use the other flashers to re-flash with.

      you have nothing to loose aslong as you have a good dump in the first place

    323. sonyweb
      04-17-2013
      12:39 PM
      323

      Originally Posted by baileyscream
      i know off 3 ppl that have said they have.
      but to be honest you have other flashers so if you fail with the 1.2 then you can simply use the other flashers to re-flash with.

      you have nothing to loose aslong as you have a good dump in the first place
      Will do as you say in the next 2 days.
      About the 3ppl, are they on this forum or?

      Anyway,[MENTION=234602]4DoorITR[/MENTION] can I get confirmation on flashing success from u?

    324. 4DoorITR
      04-17-2013
      01:02 PM
      324

      Originally Posted by sonyweb
      Will do as you say in the next 2 days.
      About the 3ppl, are they on this forum or?

      Anyway,[MENTION=234602]4DoorITR[/MENTION] can I get confirmation on flashing success from u?
      I am having issue with powering the NOR, so no unfortunately no writing as of yet. Just CFI confirmation.

    325. sonyweb
      04-17-2013
      01:17 PM
      325

      Originally Posted by 4DoorITR
      I am having issue with powering the NOR, so no unfortunately no writing as of yet. Just CFI confirmation.
      O.K.
      In 2days time will start own extensive testing.
      Thanks.

    326. baileyscream
      04-17-2013
      01:22 PM
      326

      Originally Posted by sonyweb
      Will do as you say in the next 2 days.
      About the 3ppl, are they on this forum or?

      Anyway,[MENTION=234602]4DoorITR[/MENTION] can I get confirmation on flashing success from u?
      there from irc
      they could be on this site i dont know.
      but with so many ppl that have this flasher 3 is a tiny number to go by.
      we need trusted downgraders like yourself to comfirm it works or post the issues.
      like 4door just has.

      i may know off 3 but there not from the trusted guys we all know.

      its bizzar how "unknowns" or random noobs are reporting it works yet ppl everyone knows are reporting failures

      it should be the other way around by now

    327. 4DoorITR
      04-18-2013
      12:33 AM
      327

      Trying to inject 3.3v from an ATX to a DIA-001 that is a true YLOD (GPU connection). I get garbage. But if I fire up the console with the PS3 power supply I can quickly dump CFI before it shuts off. I can also dump the first few blocks and they are valid. So my question is why is the ATX not working. It is supplying 3.28v when measured.

    328. Sarah1331
      04-18-2013
      02:14 AM
      328

      Originally Posted by 4DoorITR
      Trying to inject 3.3v from an ATX to a DIA-001 that is a true YLOD (GPU connection). I get garbage. But if I fire up the console with the PS3 power supply I can quickly dump CFI before it shuts off. I can also dump the first few blocks and they are valid. So my question is why is the ATX not working. It is supplying 3.28v when measured.
      How many amps


      Sent from my iPhone 5 using Tapatalk 2

    329. uf6667
      04-18-2013
      04:05 AM
      329

      Originally Posted by 4DoorITR
      Trying to inject 3.3v from an ATX to a DIA-001 that is a true YLOD (GPU connection). I get garbage. But if I fire up the console with the PS3 power supply I can quickly dump CFI before it shuts off. I can also dump the first few blocks and they are valid. So my question is why is the ATX not working. It is supplying 3.28v when measured.
      1) click dump
      2) enter filename
      3) connect progskeet
      4) click save
      5) turn on console

      now it's on and you can do whatever you please

    330. 3absiso
      04-18-2013
      04:19 AM
      330

      Originally Posted by uf6667
      1) click dump
      2) enter filename
      3) connect progskeet
      4) click save
      5) turn on console

      now it's on and you can do whatever you please
      You mean the PS3 will halt? it is GPU YLOD not Flash YLOD
      or on using ATX?

    331. uf6667
      04-18-2013
      04:28 AM
      331

      Originally Posted by 3absiso
      You mean the PS3 will halt? it is GPU YLOD not Flash YLOD
      or on using ATX?
      oh it will definitely turn off if it's a YLOD problem but I assumed it's a bad flash, sorry for the confusion

    332. 3absiso
      04-18-2013
      04:33 AM
      332

      Originally Posted by uf6667
      oh it will definitely turn off if it's a YLOD problem but I assumed it's a bad flash, sorry for the confusion
      So if i wanna power the Nor Via ATX,
      where should i wire the 3.3V point,
      to the Nor Leg?
      since the 3.3v test point will not work

    333. uf6667
      04-18-2013
      06:32 AM
      333

      Originally Posted by 3absiso
      So if i wanna power the Nor Via ATX,
      where should i wire the 3.3V point,
      to the Nor Leg?
      since the 3.3v test point will not work
      What people don't understand... you are doing this "in-circuit", meaning that the nor power supply is also connected to other components requiring 3.3V power supply.

      why isn't the 3.3V test point not working? logically (physically) it doesn't make sense to me... the test point's just a wire that goes to the 3.3V rail...

    334. 4DoorITR
      04-18-2013
      02:00 PM
      334

      Originally Posted by uf6667
      1) click dump
      2) enter filename
      3) connect progskeet
      4) click save
      5) turn on console

      now it's on and you can do whatever you please
      That works but I get verification errors on the first few blocks. I've already dumped this console before. I had to use 26 awg wire back then. I'm testing 30 awg because I've been told numerous times that it will work although I'm not having much success.

      Multi stranded 26 awg is too stiff. Maybe some single core 26 awg would be more flexible.

    335. uf6667
      04-18-2013
      02:02 PM
      335

      Originally Posted by 4DoorITR
      That works but I get verification errors on the first few blocks. I've already dumped this console before. I had to use 26 awg wire back then. I'm testing 30 awg because I've been told numerous times that it will work although I'm not having much success.
      I suspect your grounding is not well enough, perhaps try more ground wires and all wires shorter overall

    336. 4DoorITR
      04-18-2013
      02:10 PM
      336

      Originally Posted by uf6667
      I suspect your grounding is not well enough, perhaps try more ground wires and all wires shorter overall
      I will try that but it seems to only do it during the time the PS3 is cycling on and then off, therefore during the time the voltage is varying on the circuit.

    337. 4DoorITR
      04-18-2013
      11:01 PM
      337

      [MENTION=192300]uf6667[/MENTION] A great feature to add to Winskeet if possible would be the ability to do several consecutive dumps.

    338. shepdog
      04-19-2013
      03:12 AM
      338

      Just ordered my 1.2 with Injectus. Feeling a bit like an idiot now, having not read all of this first. I guess I figured that since the 1.0 and 1.1 were solid, the new revision would only add features and not take them away. I realize that there is not currently a way to flash the NOR, but will I be able to safely/consistently flash a PS3 with a NAND? I've read posts from few people that have said that they cannot flash either.

    339. 4DoorITR
      04-19-2013
      02:46 PM
      339

      Originally Posted by shepdog
      Just ordered my 1.2 with Injectus. Feeling a bit like an idiot now, having not read all of this first. I guess I figured that since the 1.0 and 1.1 were solid, the new revision would only add features and not take them away. I realize that there is not currently a way to flash the NOR, but will I be able to safely/consistently flash a PS3 with a NAND? I've read posts from few people that have said that they cannot flash either.
      Yes NANDs can definitely be done.

    340. underwurlde
      04-19-2013
      03:18 PM
      340

      Originally Posted by uf6667
      What people don't understand... you are doing this "in-circuit", meaning that the nor power supply is also connected to other components requiring 3.3V power supply.

      why isn't the 3.3V test point not working? logically (physically) it doesn't make sense to me... the test point's just a wire that goes to the 3.3V rail...
      There appears to be a mass of confusion out there with regards to the powering.

      We have:
      1) USB Power -> ProgSkeet Power -> Isolated PS3 PCB. This does not work because not enough power can be derived through this chain.

      2) USB Power -> ProgSkeet -> Connected to (but no 3V3 connection) self-powered PS3. This usually results in confusion over ground connections due to problems arising from ground loops (earthing connection of both the PCB and the PS3 being commoned).

      3) as the result of 1) above. ATX (or similar) power supply -> Powers isolated PS3 -> connected to and powering Progskeet -> connected to (but 3.3V regulator link removed) USB. This results in the most confusion as is apparent here.

      4) For completeness, a NAND / NOR desoldered and removed from the PS3 mainboard and soldered to an adapter / solderless PCB. Mass confusion resulting from the fact that 3.3 does NOT come down the 50 way cable.

      ^ Cross pollenate that lot and what results is a mass confusion of confused masses. LOL Oh and people yapping on about wire-guage sizes to add to the mix.

      Andy

    341. Sarah1331
      04-19-2013
      03:34 PM
      341

      Originally Posted by underwurlde
      There appears to be a mass of confusion out there with regards to the powering.

      We have:
      1) USB Power -> ProgSkeet Power -> Isolated PS3 PCB. This does not work because not enough power can be derived through this chain.

      2) USB Power -> ProgSkeet -> Connected to (but no 3V3 connection) self-powered PS3. This usually results in confusion over ground connections due to problems arising from ground loops (earthing connection of both the PCB and the PS3 being commoned).

      3) as the result of 1) above. ATX (or similar) power supply -> Powers isolated PS3 -> connected to and powering Progskeet -> connected to (but 3.3V regulator link removed) USB. This results in the most confusion as is apparent here.

      4) For completeness, a NAND / NOR desoldered and removed from the PS3 mainboard and soldered to an adapter / solderless PCB. Mass confusion resulting from the fact that 3.3 does NOT come down the 50 way cable.

      ^ Cross pollenate that lot and what results is a mass confusion of confused masses. LOL Oh and people yapping on about wire-guage sizes to add to the mix.

      Andy
      It comes down my 60way


      Sent from my iPhone 5 using Tapatalk 2

    342. underwurlde
      04-19-2013
      03:48 PM
      342

      Yeah, but not UP the 50way from the ProgSkeet!

    343. 3absiso
      04-19-2013
      03:51 PM
      343

      Originally Posted by underwurlde
      There appears to be a mass of confusion out there with regards to the powering.

      We have:
      1) USB Power -> ProgSkeet Power -> Isolated PS3 PCB. This does not work because not enough power can be derived through this chain.

      2) USB Power -> ProgSkeet -> Connected to (but no 3V3 connection) self-powered PS3. This usually results in confusion over ground connections due to problems arising from ground loops (earthing connection of both the PCB and the PS3 being commoned).

      3) as the result of 1) above. ATX (or similar) power supply -> Powers isolated PS3 -> connected to and powering Progskeet -> connected to (but 3.3V regulator link removed) USB. This results in the most confusion as is apparent here.

      4) For completeness, a NAND / NOR desoldered and removed from the PS3 mainboard and soldered to an adapter / solderless PCB. Mass confusion resulting from the fact that 3.3 does NOT come down the 50 way cable.

      ^ Cross pollenate that lot and what results is a mass confusion of confused masses. LOL Oh and people yapping on about wire-guage sizes to add to the mix.

      Andy
      The only confusion for me, is this:
      For Nor PS3 i want to power the Board by ATX, where on the motherboard should i wire the ATX to be able to read/write the dump?

    344. underwurlde
      04-19-2013
      03:56 PM
      344

      GND and 3.3V test pads? surely there are images on the net of this out there?

      Andy

    345. Sarah1331
      04-19-2013
      04:09 PM
      345

      Originally Posted by underwurlde
      GND and 3.3V test pads? surely there are images on the net of this out there?

      Andy
      Yes and only connect gnd to progskeet and power progskeet using USB


      Sent from my iPhone 5 using Tapatalk 2

    346. 3absiso
      04-19-2013
      04:12 PM
      346

      Originally Posted by underwurlde
      GND and 3.3V test pads? surely there are images on the net of this out there?

      Andy
      it does not work

    347. underwurlde
      04-19-2013
      04:22 PM
      347

      what doesn't work??

    348. 3absiso
      04-19-2013
      04:29 PM
      348

      Originally Posted by underwurlde
      what doesn't work??
      When i power the 3V3 test point by ATX, i can noy make the dump.
      if you have any Mobo Diagram.the Point 3V3 test point, when i solder to it ATX source i can not dump

    349. underwurlde
      04-19-2013
      04:43 PM
      349

      You will be getting adapter boards soon!

    350. 3absiso
      04-19-2013
      04:49 PM
      350

      Originally Posted by underwurlde
      You will be getting adapter boards soon!
      Can you post some pics.
      if i like it, to send it with my order

    351. Raiden13
      04-19-2013
      04:51 PM
      351

      LOL (i need 15 posts to upload a link)

    352. 4DoorITR
      04-20-2013
      05:19 PM
      352

      Well I'm having no luck using an ATX to power a NOR. I think it wants less than 3.3v. Maybe around 2.7v.

    353. digiprog
      04-20-2013
      05:35 PM
      353

      hii guys i was reading the whole thread :P soo :P testing is incoming tomorrow morning im gonna solder my progskeet and give it a try on my ps3 I HOPE I DONT BRICK IT.. :P btw i will make a backup anyway so no danger .. i hate to see my progskeet as "useless" :P
      ************* [ - Post Merged - ] *************
      btw we must find some way to power the NOR.. [MENTION=114939]BwE[/MENTION] might help us here .. it would really 50% easier to power the NOR externally .. without assembling the ps3 ..

    354. 4DoorITR
      04-20-2013
      09:21 PM
      354

      I agree. Not to derail this thread, but has anyone downgraded a NOR using a Progskeet 1.1 AND an ATX for powering the NOR? I have a 1.1 now and would like to know before I waste my time wiring to this YLOD GPU board. Thanks!

    355. shepdog
      04-20-2013
      11:05 PM
      355

      Originally Posted by 4DoorITR
      Well I'm having no luck using an ATX to power a NOR. I think it wants less than 3.3v. Maybe around 2.7v.
      Where did you get the 2.7v figure from?

    356. haz367
      04-21-2013
      02:40 AM
      356

      Originally Posted by 4DoorITR
      I agree. Not to derail this thread, but has anyone downgraded a NOR using a Progskeet 1.1 AND an ATX for powering the NOR? I have a 1.1 now and would like to know before I waste my time wiring to this YLOD GPU board. Thanks!

      lol...why u posted previously that it worked?!..wasting time on this nor+atx..

      here's that quote again... something with lowering power trick..

      Note: Injecting 3.3v on a PS3 Slim CECH2503, with Teensy 2.0++. Didn't dump. South Bridge will hold (one of) RESET, CE or OE high until later in the Boot sequence / other hardware is initialized. // subnote: tristate was most likely not used to prevent further booting, nor was lowering power injection trick used as it is impossible for a southbridge that is not powered to pull any lines up.

    357. 4DoorITR
      04-21-2013
      03:52 AM
      357

      Originally Posted by haz367
      lol...why u posted previously that it worked?!..wasting time on this nor+atx..
      I posted that dumping CFI worked. If I try to dump the NOR using the PS3 power supply then I get random verification errors. I dumped this same console months ago using 26 awg wire, but if you also look back you'll see I was testing 30 awg + ATX + the new bitstream for writing.

    358. digiprog
      04-21-2013
      05:12 AM
      358

      hii all .. today i tried the new bitstream Progskeet 1.2 is still a ****.. it didn't even dump the cfi .. but maybe my progskeet is damged i dunno ..

    359. haz367
      04-21-2013
      02:20 PM
      359

      this is becoming a x-file

      care to explain..someone? thx in advance from all of us trying to dump NOR with ATX
      normally can read between the lines but this is one of those misty wiki quotes, wel lthe first part >>>

      nor was lowering power injection trick used as it is impossible for a southbridge that is not powered to pull any lines up.


      lower voltage or lower in circuit

      oh **** my sate is burning...runs away...

    360. shepdog
      04-21-2013
      04:11 PM
      360

      Originally Posted by haz367
      this is becoming a x-file

      care to explain..someone? thx in advance from all of us trying to dump NOR with ATX
      normally can read between the lines but this is one of those misty wiki quotes, wel lthe first part >>>

      nor was lowering power injection trick used as it is impossible for a southbridge that is not powered to pull any lines up.


      lower voltage or lower in circuit

      oh **** my sate is burning...runs away...
      It sounds to me that hes saying that the trick is to inject just enough voltage to power the nor, but not enough to power up the southbridge.

    361. Orion218
      04-28-2013
      11:28 AM
      361

      Sooo, anyone have any luck with new bitstream?
      Right now I'm trying to flash Spansion N NOR.

      My setup:
      Progskeet 1.2
      Bitstream - ProgSkeet_12_NOR_130412_1647.dat
      Drivers - drivers_winusb_111121
      Soft - WinSkeet130416 OR Winskeet111205
      DIA-001 motherboard with blinking red light (empty NOR, thanks to previous bitstream)
      P5 (TRISTATE) connected to GND
      P2 & P7 (Primary/Secondary CE#) connected to the same point on motherboard
      Everything else connected as shown on diagram (including all GND and 3.3V points)
      On Progskeet motherboard - R7 Open, R8 Closed.

      What I'm doing:
      1)Open Winskeet
      2)Power on PS3
      3)Connect Progskeet to USB
      4)Dump,Flash, etc

      What i got so far:
      CFI,Dumping,Erasing - works flawlessly on any settings

      Flashing - I tried to flash at least first 128KiB. Result - on buffered write (32 bit) & USB transfer timing settings Progskeet flashes first 2-5 KiB without any errors (FACEOFF, DEADBEEF, asecure_loader, metldr etc.) and the rest filled with FF's. On other settings it's pretty much the same, but in addition data gets mixed with random FF patterns (like DATA FFFF DATA FFFF).

      Is there something I'm doing wrong? I already re-wired everything 2 times with same result.

    362. Sarah1331
      04-28-2013
      02:07 PM
      362

      Take the 1-2 days for NAND 2 tab was like the fix of the skeet 1.2 yea

      Can anyone even confirm working yet ?


      Sent from my iPhone 5 using Tapatalk 2

    363. 4DoorITR
      05-03-2013
      09:22 PM
      363

      Originally Posted by Sarah1331
      Take the 1-2 days for NAND 2 tab was like the fix of the skeet 1.2 yea

      Can anyone even confirm working yet ?


      Sent from my iPhone 5 using Tapatalk 2
      The newest Winskeet does allow dumping of both NANDs but I get verification errors. If I dump separately they finish with no errors.

      But it definitely does not fix writing to NAND B side.

    364. Orion218
      05-04-2013
      10:56 PM
      364

      Well, I desoldered all 3.3V wires, so Progskeet powered via USB and NOR powered by PS3.
      One word program + USB transfer timing = it works! But it takes about 2min 11s to flash single 128kib block. And sometimes Progskeet freezes (usually after 5-20 blocks), so you have to re-connect USB cable and start flashing from where you stopped (thank god for differential flash option!). So in total it took me about 6 hours to flash 16mib NOR Spansion N.

      In conclusion : it is possible to flash Spansion N NOR with Progskeet 1.2, but it takes way too much time.

    365. baileyscream
      05-08-2013
      01:07 PM
      365

      first time programing the progskeet v1.2 via InJeCtuS using InFeCtuS

      ActID = 02a121cf
      ExpID = 03a121cf

      Initializing Target Device...

      Setting BSR Configurations...

      Reading Security...

      Performing Data Authentication...
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .

      Erase...

      ACTEL_SLOG_UROW =
      8F 1C FE 28 FD C5 79 B8 99 F5 47 E7 6B 00 8B 71


      Programming UROW...

      Programming FPGA Array...
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .

      Verifying FPGA Array...
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .
      .

      Programming Rlock...

      Programming SILSIG...
      as you can see you DO get info in SLOG ..... I wasn't going mad after all.
      after this first time you then get FF FF FF FF FF etc

    366. sonyweb
      05-13-2013
      01:38 PM
      366

      Nor spansion P and Samsung Q successfully flashed with progskeet 1.2.Details will follow soon.

    367. sonyweb
      05-13-2013
      06:34 PM
      367

      These are my settings anyway,using last bitstream;
      For spansion p use,buffered write + USB transfer timing.
      Samsung Q just select from the common tab and don't alter anything(single word program + ready triggered timing.Flashing takes about 7min for both.

      Need to inform [MENTION=192300]uf6667[/MENTION] that ps v1.2 freezes on some USB ports during read and flash operations,so could check on that(maybe some mod on the last bitstream).Used a dell XPS Gx 620 without freezing after trying on three diff PCs.

    368. swensonb
      06-11-2013
      11:49 AM
      368

      bump this thread

      CFI does work
      but Dump has verification errors everytime...

      re-wired 3 times same problem...still no workaround solution ?

      regards
      swensonb