Objectives Suite and QAFLAG ?
 

Hello,
First sry for my english :embarassed:

Do you think, it's possible to active the QAFLAG with objectivesuite ?

I have a RSOD PS3 and i want to active the QAFLAG , anyone know the command and value ?

thanks for all

what does an RSOD ps3 have to do with QA-Flag?

also yes object suites might be able to modify your machine to QA flag it.

and btw if you have a rsod machine, you need to fix it, not QA flag it.

I know ...
I tried more thing but in fact my PS3 was in 3.73.
So i downgraded to 3.55 with my progskeet but i have always RSOD.
I tried to flag it for downgrade to 2.76 "factory firmware" by my recovery mode.

My log error by Ojective suite on syscon is :
DateTime : 2011/12/26 20:04:00
Product Serial : file://temp:prd_serial_01.new
Board ID : 3HG10177049A
status : 00000000
power_on_time : 3687595
bringup_count : 1185
shutdown_count : 915
sc_errorlog 00 : 00000000 A0801004 FFFFFFFF
sc_errorlog 01 : 00000000 A0801004 FFFFFFFF
sc_errorlog 02 : 00000000 A0801004 FFFFFFFF
sc_errorlog 03 : 00000000 A0801004 FFFFFFFF
sc_errorlog 04 : 00000000 A0801004 FFFFFFFF
sc_errorlog 05 : 00000000 A0801004 FFFFFFFF
sc_errorlog 06 : 00000000 A0801004 FFFFFFFF
sc_errorlog 07 : 00000000 A0801004 FFFFFFFF
sc_errorlog 08 : 00000000 A0801004 FFFFFFFF
sc_errorlog 09 : 00000000 A0801004 FFFFFFFF
sc_errorlog 10 : 00000000 A0801004 FFFFFFFF
sc_errorlog 11 : 00000000 A0801004 FFFFFFFF
sc_errorlog 12 : 00000000 A0801004 FFFFFFFF
sc_errorlog 13 : 00000000 A0801004 FFFFFFFF
sc_errorlog 14 : 00000000 A0801004 FFFFFFFF
sc_errorlog 15 : 00000000 A0801004 FFFFFFFF
sc_errorlog 16 : 00000000 A0801004 FFFFFFFF
sc_errorlog 17 : 00000000 A0801004 FFFFFFFF
sc_errorlog 18 : 00000000 A0801004 FFFFFFFF
sc_errorlog 19 : 00000000 A0801004 FFFFFFFF
sc_errorlog 20 : 00000000 A0801004 FFFFFFFF
sc_errorlog 21 : 00000000 A0801004 FFFFFFFF
sc_errorlog 22 : 00000000 A0801004 FFFFFFFF
sc_errorlog 23 : 00000000 A0022110 FFFFFFFF
sc_errorlog 24 : 00000000 A0022110 FFFFFFFF
sc_errorlog 25 : 00000000 A0022110 FFFFFFFF
sc_errorlog 26 : 00000000 A0022110 FFFFFFFF
sc_errorlog 27 : 00000000 A0022110 FFFFFFFF
sc_errorlog 28 : 00000000 A0801004 FFFFFFFF
sc_errorlog 29 : 00000000 A0022110 FFFFFFFF
sc_errorlog 30 : 00000000 A0022110 FFFFFFFF
sc_errorlog 31 : 00000000 FFFFFFFF FFFFFFFF

And with that ?
Perhaps anyone have a file .SIG for FLAG the QAFLAG ?

@++

Hmmm, as Pockets69 has stated your PS3 is in a non-functional state. To be able to do almost anything on the PS3 it needs to be functioning.
Also you will probably not get a Sig file because Sig files are part of objective suites and distributing them is illegal, so you might not be able to get them here.

Of course, but perhaps just the instruction and value :redface:

im just wondering why did it rsod in the first place
1: downgrade failure
2: ros0 or ros1 empty
3: flash corrupt
4: general hardware failure
tbh i don't think objective suit gonna help you out here with QA flagging

In answer:
1: downgrade failure> don't know but i succesly downgraded to 3.55 Rogero v2 "i have recovery mode ok"
2: ros0 or ros1 empty > "No" i'm verified with flowrebuider
3: flash corrupt > "No" i changed the component :embarassed:
4: general hardware failure > last soluce perhaps but i'm not sure why question one. and for that i want it's possible to downgrade in 2.76 with QA flag !