PS3Hax Network - Playstation 3 Hacks and Mods

PS3Hax Network - Playstation 3 Hacks and Mods (http://www.ps3hax.net/forums.php)
-   DRM Dongles (http://www.ps3hax.net/forumdisplay.php?f=159)
-   -   ERROR: Unable to communicate with dongle! (http://www.ps3hax.net/showthread.php?t=36240)

spec8320 04-02-2012 05:20 AM

ERROR: Unable to communicate with dongle!
 
Hi.

At beginning I want to tell that I have:

- Tested it on REBUG TB cfw v2 edition.
- Original TB v2 edition.
- Installed them via recovery and normally.
- Tried to update to older versions (2.2 , 2.4).
- I don't have other devices connected to USB.

OK so I get this error after trying to update my TB using console. I enter application then when It ask me to insert my TB I insert it and after pressing OK I got this error. Any ideas how to get this shi* working ? I'm really pissed of right now (TB is new I just get it).

What's more:
- When I put TB in usb and start my PS3 (it don' start - TB light is red).
- When I put TB in usb to update it (it don't update - TB light is red).

willemse21 04-02-2012 05:24 AM

you need some vaseline.then it will work!

enosrasun 04-02-2012 06:23 AM

start your ps3 ,and after 5 sec
after boot plug in tb let it glow and then start to update

it work's great with vaseline to,test it :)

mirkie 04-02-2012 07:04 AM

I see some butthurt people here.

Install the latest true blue cfw and update the dongle after that.
Not Rebug!

chadvt 04-02-2012 07:10 AM

you no longer need to update, since it is already updated to the latest 2.51 ver, im assuming you just bought it recently.. tb plugged and boot ps3, check at settings - system settings - system info you should see your tb ver is 2.51 (yup .51 and not .5)..

and as long as tb cfw v2 and tb 2.5 games are working then there is nothing to update..

nuTTy 04-09-2012 02:49 PM

Quote:

Originally Posted by chadvt (Post 348366)
you no longer need to update, since it is already updated to the latest 2.51 ver, im assuming you just bought it recently.. tb plugged and boot ps3, check at settings - system settings - system info you should see your tb ver is 2.51 (yup .51 and not .5)..

and as long as tb cfw v2 and tb 2.5 games are working then there is nothing to update..

are you sure? if its true, this is really good news!

RVX 04-09-2012 04:13 PM

Quote:

Originally Posted by spec8320 (Post 348331)
Hi.

At beginning I want to tell that I have:

- Tested it on REBUG TB cfw v2 edition.
- Original TB v2 edition.
- Installed them via recovery and normally.
- Tried to update to older versions (2.2 , 2.4).
- I don't have other devices connected to USB.

OK so I get this error after trying to update my TB using console. I enter application then when It ask me to insert my TB I insert it and after pressing OK I got this error. Any ideas how to get this shi* working ? I'm really pissed of right now (TB is new I just get it).

What's more:
- When I put TB in usb and start my PS3 (it don' start - TB light is red).
- When I put TB in usb to update it (it don't update - TB light is red).

If you boot your PS3 with your TB dongle in it and it refuses to go to XMB, it means you got a dead dongle on your hands.

Go back to your reseller and inform him about it.

Amic3r 04-09-2012 04:20 PM

Quote:

Originally Posted by mirkie (Post 348362)
I see some butthurt people here.

Install the latest true blue cfw and update the dongle after that.
Not Rebug!

The only butthurts are the ones without vaseline!

nuTTy 04-10-2012 08:46 AM

my dongle is new and working on 2,51(green led). I tried to update to lastest version but it was failed. I'm also tried street fighter & tekken and it is working. I was read, this dongle is lastest factory version with lastest firmware. if my dongle is dead dongle, its have to stuck in red led? but my dongle is working, also with lastest games but I couldnt update it?

OoZic 04-10-2012 10:02 AM

Quote:

Originally Posted by nuTTy (Post 352191)
my dongle is new and working on 2,51(green led). I tried to update to lastest version but it was failed. I'm also tried street fighter & tekken and it is working. I was read, this dongle is lastest factory version with lastest firmware. if my dongle is dead dongle, its have to stuck in red led? but my dongle is working, also with lastest games but I couldnt update it?

And you are very sure you have an original TB dildo? There are fakes now looking exactly like the original TB.
I can imagine those devices can't be updated with TB FW...
http://www.ps3hax.net/showthread.php?t=36487


All times are GMT -5. The time now is 12:41 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.