bricked after trying to download 3.55ofw
 

i used the e3 flasher to downgrade system and made it all the way to having rogero on it but i forgot about dehashing and put on the 3.55 ofw on ps3 and it bricked my ps3. since then i have taken the flasher reinstalled and soldered the sbe to the tristate and got it to turn back on and stay on now since i bricked going to the 3.55 what do i do to get back to the rogero so i can dehash i dont have a back up on the 3.55 the only back ups that i have are for the 4.21 that was on my ps3 to start with.. i really hope there is a way to fix this thanx in advance for the comments
************* [ - Post Merged - ] *************
this is the code i get when i try to put backup on ps3

start logging...
program PS3 BIOS.
program from TF.
start programming.
read 0:bkpps3.bin at 0x00000000 ... OK.
erase PS3 BIOS at 0x00000000 ... OK.
write PS3 BIOS at 0x00000000 ... failed.
Program Nor failed.

You need to secure the clip better. Once you have the clip on good,
Follow my downgrade guide below, from the spoiler "Downgrade to Rogero".
When it says have all switches down, you have to keep switch 1 up.

ive tried putting a coin on top of the clip i have tried a different sd card i wonder if i messed the clip up when i soldered the wire to it to get my ps3 to turn back on i know that it worked becuase before my ps3 would not stay on and now it stays on but with a black screen and everytime i try to do a update i get that same error in the last post. since the power stays on doesnt that mean that my clip is working?

The power stays on simply because the nor tristate is grounded to the sbe point.

You could very well of messed up the ribbon. The are easy to damage. I just ripped one in half last night.:(

if i take the time and wire up the e3 linker to the ps3 do i still need the clip? doesnt that take its place?

Yes the linker takes the place of the clip. If your good at soldering those tiny points, it will work great for you.

do you happen to know of any good guides for locations and installation

Look at this chart.
Then find your motherboard here.
Those pics are labeled for Progskeet. So look at the chart and compare the points on the linker and find out what they are for Progskeet.