E3 Reader
 

Hi dose anyone have the files and .bin for the E3 reader to put the PS3 into Service Mode following the E3 Flasher.

I saw a Posr for Playerk420 and grap it
here it is

Thanks for that. :)
************* [ - Post Merged - ] *************
on the E3 flasher just gone to dump the nor and the blue lights are flashing is that normal

No, that is not normal. It is an error code.
Look here to find what the code is: http://www.ps3devwiki.com/wiki/E3

ok got a good dump how ever when i went to flash my console i got anunble to programe nor now my ps3 come on then turns off what can i do.

Make sure your dump is valid: http://www.ps3devwiki.com/wiki/Validating_flash_dumps

Then follow this: http://www.ps3devwiki.com/wiki/E3#Fl...for_Debricking

I always make a dump and validate it. Then make more dumps, to make sure the clip is still secure. And compare the dumps with HxD, analysis tab, file compare. They need to be identical.

If you started flashing and the clip wasn't secure, the ps3 bricked. So hopefully the dump you did get is valid.

is there anyway to keep the ps3 powered on without soldering

I have read that the latest update.bin for the flasher, will keep it on without soldering.

But I have not tried it. So I can't say for sure. The latest update.bin will only work if this is the first PS3 you have used with the e3 flasher.

do you know were to get the latest
************* [ - Post Merged - ] *************
My ps3 is stuck come on within 2 seconds turns off with 3 beeps then flashing Red light. im not the best with a solder so i haven't a clue if anyone got any ideas id be great full.

http://e3-tech.net/download.html