PS3Hax Network - Playstation 3 Hacks and Mods - View Single Post - Arduino Duemilanove/Mega with PL3 and Hermes v4b together

ricardopvz · 10-25-2010

There are many people who doesn't know which payload to use (Hermes or PL3).
So i thought, i don't we put them together?

And that's what i made. When you connect your arduino to the PS3, you can choose which payload to use by simply pressing a button or moving a switch.

You connect a button or a switch from pin 12 to 5v, and then you can select which payload to use. The led on pin 13 will go ON when PL3 is being used, if it is OFF, then Hermes is being used.

Tested with arduino duemilanove. Tested with arduino mega.
This is only for fw 3.41.

Download Link: http://www.ps3hax.net/downloads.php?do=file&id=507

--------------------------------------------------------------------------------

Here it is! This version has PL3 with PSN support!!

download: http://www.mediafire.com/?w39oqo3j6ftp5po

Both PL3 and Hermes v4b with PSN support: http://www.mediafire.com/?98nfnh5clen6mr1

This one simulates a debug ps3 instead of a reftool
http://www.mediafire.com/?9knd87ybpc023yz
It has less banning risk, and solves the 80029519 error problem

PSN and 3.50 Spoofing (both PL3 and Hermes)
Download: http://www.mediafire.com/?v7rix3xic7g9xb9

CE-X-3.41 (Custom payload for 3.41)
Download: http://www.mediafire.com/?ok5t4m2a57zk2zz

Remeber to add DNS to your PS3 network config: 67.202.81.137
Otherwise, PSN will promp for a firmware update (i think this is not needed anymore)

EDIT: Sony already patched PSN!

Have Fun!

--> Donate <--

10-25-2010	#1
ricardopvz Member Join Date: Sep 2010 Location: Portugal Posts: 57 Likes: 1 Liked 33 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Arduino Duemilanove/Mega Psgroove Builds \| UPDATED: 11-19-2010 There are many people who doesn't know which payload to use (Hermes or PL3). So i thought, i don't we put them together? And that's what i made. When you connect your arduino to the PS3, you can choose which payload to use by simply pressing a button or moving a switch. You connect a button or a switch from pin 12 to 5v, and then you can select which payload to use. The led on pin 13 will go ON when PL3 is being used, if it is OFF, then Hermes is being used. Tested with arduino duemilanove. Tested with arduino mega. This is only for fw 3.41. Download Link: http://www.ps3hax.net/downloads.php?do=file&id=507 -------------------------------------------------------------------------------- Here it is! This version has PL3 with PSN support!! download: http://www.mediafire.com/?w39oqo3j6ftp5po Both PL3 and Hermes v4b with PSN support: http://www.mediafire.com/?98nfnh5clen6mr1 This one simulates a debug ps3 instead of a reftool http://www.mediafire.com/?9knd87ybpc023yz It has less banning risk, and solves the 80029519 error problem PSN and 3.50 Spoofing (both PL3 and Hermes) Download: http://www.mediafire.com/?v7rix3xic7g9xb9 CE-X-3.41 (Custom payload for 3.41) Download: http://www.mediafire.com/?ok5t4m2a57zk2zz Remeber to add DNS to your PS3 network config: 67.202.81.137 Otherwise, PSN will promp for a firmware update (i think this is not needed anymore) EDIT: Sony already patched PSN! Have Fun! --> Donate <-- Last edited by ricardopvz; 12-11-2010 at 06:14 AM.