Originally Posted by maiquelrinco
YLOD is GPU or CPU solder....weird, because my PS3 is new, I never had open it...I´m was trying to install CFW 3.55 wk and bricked at this exact moment, it´s coincidence ?
If the problem was GPU or CPU solder/need reflow, why when I bypass the normal state with TRISTATE point the CPU keeps ON ?
Could you give the link to your own dump and the Link to your how to unbrick. Very Thx!
|
Now if theres different versions of YLOD then I dont know about its possible could be something else not really sure sorry.
If your ps3 is new and got the ylod I am sorry I don't know what else to tell you. Search on google for anyone who had the same issues as you and find alternative fix. Or buy another ps3
************* [ - Post Merged - ] *************
Originally Posted by comeonfatty
Ok so ive soldered the wire correctly and the unit powers on however, if i leave the TF board plugged in the unit still turns off automatically. If i leave the TF board off and power it on it stays on and then i plug the TF board in and it stays on, is this normal? So far i am following your steps from the tutorial, i have downloaded your modded bios and flashed and now im continuing to flash with my 3.73 bios and then after that flashed with both my 3.73 bios and the downgrade file and then it completes. Whats supposed to happen after this as im still not getting any output on the tv. I am unable to hold the power button down until it resets the output mode for the tv as it just powers off. Any ideas?
|
After you install downgrade.bin file your suppose to insert JB dongle then do the power and eject sequence and then install 3.55 regero
************* [ - Post Merged - ] *************
Originally Posted by comeonfatty
ok i still cant get around this, the unit only powers on when the e3 board isnt plugged in on the front, the only way i can turn it on is by doing this method.
im so close to smashing it with a hammer its unbelievable!
|
Clearly there is a short on either Clip to the NOR on mother board or a wire from TRISATE is touching something. Ive had a lot of issues with the E3 TF board touching other metal parts. I would tape on contacts point before reinserting it in HDD slot