Originally Posted by tyxaioonoma
First of all thanks a lot!
I signed up to this forum just for this tutorial!
I have some simple questions:
1)I am on 3.65 on a 3rd quarter 2010 console (2504 0c), do i have to update to a newer ofw before i start if yes to which one?
2)Can i use your tutorial with the files from the e3 webpage?
3)with this update.bin I can use the E3 flasher to as many ps3's i like? (is it the samsung one?)
4) 3. Set the switches on your e3 1 and 2 down and the rest up. Turn on the ps3. All 8 blue led lights light up and means your flasher has taken the update. Press the reset button.
4. Move the switches to 1 and 2 down, 3 up, 4,5, and 6 down. Press reset.
you mean to press the powerbutton? To power down then power up?
5)I understand that when i do the process for the first time i MUST use ROGERO_CFW3.55-V2-4.00SPOOF_PS3UPDAT.PUP or can i use KMEAW_CFW3.55_NO_CHECKPS3UPDAT.PUP?
6)Where are the differences of this method and the one in khalkedeon's video? (official e3 page)
Some minor questions:
1) the micro-sd must be in fat 32?
2)for step 1 and step 2 can i use any king of usb flash? I suppose it must be on fat 32....
3)I am a simple user i want a 3.55 cfw simple and easy to use, i want to install it and forget it. Is Rogero or KMEAW best? Can I Play 3d blu-ray with ROGERO or KMEAW?
Important.
in your files both Lv2diag.self are in step 1, which one is which?
THANKS IN ADVANCE!!!
|
1. You do not have to update to latest firmware if you don't want to.
2. Yes the tutorial from the e3 homepage works, just use the samsung update to update your flasher before each ps3 you downgrade.
3. + 4. I mean the reset button on the front of the flasher. There is no reason to turn off the ps3 until you get to the part with "connect controller with usb and press ps button" on the screen. Don't connect controller cut the power off.
5. If you just want to go to cfw 3.55, then you can stop when you get rogero cfw3.55 w/4.0 spoof. It works just as good. If you install the Kmeaw cfw in the package, before doing QA Flag, then you will brick.
6. Usb flash drive and micro sd card should be formatted to fat32.
edit - Oh yeah, and thanks for pointing out that the Lv2diag.self files were not in there correct folders. I fixed it, if you redownload the pack they should be in the correct folders.