Originally Posted by DiabolicGod
All the six dumps were identical, exactly the same file, same hash.
All the six dumps were successfully verified by norpatch.
|
Perfect. You're on a good way..
Originally Posted by DiabolicGod
And that is where my first problem occurred. When I tried to use the write command, it gave me an error saying "Command not supported for Samsung K8Q2815UQB".
Now, one of my questions is...is that normal? Am I doing it wrong?
|
That's completely normal. As NORway says, the "write" command simply isn't supported for the Samsung K8Q, i.e. this particular writing mode is not implemented by Samsung.
Originally Posted by DiabolicGod
Next, I tried once again to write the downgrade.bin, this time using the writewordubm command, and this time it flashed fine, no errors.
|
There you go.. "writeword" would also do the job, but is a little slower.
Originally Posted by DiabolicGod
After that screen, I turned off the PS3, and then attempted to put the PS3 into factory service mode, I was using my PSP to do so, but I was unsuccessfully. I'm not sure that's the correct way, or if it still works, etc, its just that on all the guides I read, that is all they specify...they simply say "put it in factory service mode".
|
Turn off your console (remove power cord). Plug it in again and press power and eject in a fast sequence. Console should beep five times (or so). It usually also powers off automatically after that. Sometimes it needs a couple of tries.
Originally Posted by DiabolicGod
Eventual I flashed back one of the original dumps, and the PS3 is now working again, with stock 3.70.
Does NORway support my nor chip? Is there a problem with the dumps? Or is it the downgrade.bin I'm creating? Am I flashing it wrong? Does the PSP no longer works to put the PS3 into factory service mode? Am I'm getting the wrong "press ps3 button" screen?
|
Actually this isn't a NORway / Teensy problem, since the hardware part is working pretty well (so this might be the wrong thread). But I'm glad to hear that the latest beta is working so flawlessly with the K8Q without any further modifications (most problematic chip ever).
But you might wanna check this out:
http://ps3devwiki.com/wiki/Downgradi...rdware_flasher
Let me know when you've downgraded successfully or have further questions.