Originally Posted by mossopinc
i followed EVERYSTEP!
STEP 2 :: GOING INTO FACTORY SERVICE MODE
1- Connect the USB Storage Device to the PC.
2- Copy the files from "FACTORY_SERVICE_MODE_TOOL_v02" to the root of a USB storage device.
3- Connect the USB Storage Device to the PS3 and install "FactoryServiceMode.gnpdrm.pkg".
4- Run "Factory Service Mode Tool" from the XMB Game column.
5- If you hear 3 beeps, try it again, it should beep once now and reboot into Factory Service Mode.
6- You can turn off your PS3 for now.
yup it beeped 3 time so i did it again and it beeped once then the PS3 turned itself off, when i now turn it on i get all the sound but the tv never show me anything  is this bad?? i also cant enter restore mode as after i get the 2 beeps the ps3 now just turns off.
and ive did the hold the power button down for 5 seconds. Once you hear the second beep sound, which will indicate the reset has been completed.
|
After going into service mode, you had to leave the PS3 off, as mentioned on the guide.
But, in any case, to exit service mode follow these steps and let me know.
*- Connect the USB Storage Device to your PC.
*- Rename "Lv2diag_exit.self" to "Lv2diag.self".
*- Connect the USB Storage Device to your PS3 and turn it on.
*- Your PS3 should be out of Factory Service Mode.
*- Connect the USB Storage Device to your PC.
*- Rename "Lv2diag.self" to "Lv2diag_exit.self".
Let me know how it goes
SeeYa!
