Originally Posted by Sarah1331
Please people I have patched the dumps I have and flashed them and it has bricked the console
Flashed the orig dumps back and it works
|
geeze your lucky
1st. put the ps3 back together and re-install what ever firmware is on it.
this will hopefully insure any bad areas you may have flashed back are restored.
(although there are areas that the firmware simply does not touch)
2nd i suspect not all the pins in the clip are touching the legs of the nands propperly.
3rd clean the clip and legs with alcohol wipes then try again.
4th use good quick clamps to hold the clip in place and check the clip is sat flush
5th check the flat cable is sat square in the ffc clip's
6th NEVER FLASH BACK A DUMP THAT IS NOT 100% VERIFIED
--------------------------------------------------------------
i'm away now for the weekend.
but take your time and it will suddenly start working if you keep repeating the above steps