PS3Hax Network - Playstation 3 Hacks and Mods - View Single Post - Ultimate Fool Proof Guide: Ps3 Hardware Downgrading

slutbunny · 11-15-2012

Hello, I have a CECHA01 BC 60 GB PS3 with a COK-001 motherboard with a NAND chip on the top and bottom side.
I bought a Progskeet 1.2 + NAND 48-pin 360-clip for downgrading my PS3 from 3.74 to 3.55.
I have filed the 360-clip to fit flush on the NAND but it will fall off with any movement.

So my question is what would be the best way to secure the 360-clip on the NAND if I wanted to use the PS3 to supply power to the NANDs? Would Electrical Tape work?

11-15-2012	#682
slutbunny Apprentice Join Date: Nov 2012 Posts: 3 Likes: 0 Liked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hello, I have a CECHA01 BC 60 GB PS3 with a COK-001 motherboard with a NAND chip on the top and bottom side. I bought a Progskeet 1.2 + NAND 48-pin 360-clip for downgrading my PS3 from 3.74 to 3.55. I have filed the 360-clip to fit flush on the NAND but it will fall off with any movement. So my question is what would be the best way to secure the 360-clip on the NAND if I wanted to use the PS3 to supply power to the NANDs? Would Electrical Tape work?