step 10: I can't get into the tmp folder it just closes the whole file browser. In fact i cant open any folder in the dev_hdd0 for some reason. Do you know how to fix this?
Originally Posted by carldenning
i not got a flasher . nor did i have a my cex flash back up cos my hdd went with it saved on , any way what i did was
make sure debug menu = release check: release
bootmode: release
1. install itskamel dex cfw 3.55
2. install rebugs lv2_loader.pkg
3 install eEID_RKDumper.pkg
4. used mutiman mmCM ver 04.04.03 FULL
5. enable write to dev_flash in mutiman
6. get kmeaw lv2_kernel.self and put root of dev_blind folder
7. disable write access dev_flash in mutiman
8. run lv2_loader.pkg " if worked u will hear 3 beeps"
9. run eEID_RKDumper.pkg " if worked u will hear 3 bleeps"
10 use mutiman and go to hdd0\tmp\ and u will see the key .
11. copy key to usb
12. in mutiman go to mmos then to filemanger and on anyfile press CIRCLE and then Open in Hex
13.Press [SELECT] to switch to LV2
14 .Then press [START] to dump
15. It will ask if you want to dump LV2 press [NO]
16 It will ask if you want to dump LV2 press [NO]
17 .Third question is about the flash, press [YES]
18 your dump will be aon your usb
It will look similar to 20121024-191144-FLASH-NAND-FW3.55.NANDBIN
19. copy your dumo and key to pc
12. download multiMAN ver 04.08.00 BASEPLUS (20121023) .rar
13. extract folder and go to multiMAN ver 04.08.00 BASEPLUS (20121023)\apps_pc\c2d
14 . mover folder c2d to C:\ " so its C:\c2d
15 . install Win32OpenSSL_Light-1_0_1c.exe from the c2d folder and install it as C:\openssl
16 . copy your dump and keys to C:\c2d
17 . rename you dump to my.DEX.EID0.NANDBIN
18 rename your key to eid_key_file.bin
19. in cmd go to C:\c2d
20 . enter c2d.exe eid_key_file.bin my.DEX.EID0.NANDBIN my.CEX.EID0.NANDBIN [target_id]
[target_id]: 82..8E
82 (DEX/DEBUG) (default)
83 (JAPAN)
84 (USA/CANADA)
85 (EUROPE)
86 (KOREA)
87 (UK)
88 (MEXICO)
89 (AUSTRALIA/NZ)
8A (SE ASIA)
8B (TAIWAN)
eg for me it was
c2d.exe eid_key_file.bin my.DEX.EID0.NANDBIN my.CEX.EID0.NANDBIN 87
21. copy my.CEX.EID0.NANDBIN to usb
22. Download And Install FactoryServiceMod.pkg but DONT RUN IT .
http://www.mediafire.com/download.php?c4q49vo221bq8h6
23 . Download Rogero CFW FOR CEX and rename it to PS3UPDAT.PUP
24 . Download Lv2diag.self file (365Kb)
http://www.mediafire.com/download.php?q0cgp3zj3a92rdx
25 . Copy Rogero CFW and Lv2diag.self to root folder of Your USB
26 . on you usb should be on the root Rogero CFW and Lv2diag.self and my.CEX.EID0.NANDBIN
27 put usb in to ps3 and go to mm file manger .
28. got to usb and double click on my.CEX.EID0.NANDBIN and follow intrustions
28 once its flashed " DO NOT TURN YOUR PS3 OFF "
29. Run FactorySerViceMode From XMB wait tfor the ps3 to turn off automaticlly it will take a while
30 . DO NOT TURN YOU PS3 OFF . remove usb and remove the Lv2diag.self (365Kb) from usb stick
31 .download this Lv2diag.self (4.14Kb) and put this on the usb stick " dont mix this up with the other Lv2diag.self
http://www.mediafire.com/download.php?tpvau6ikd4xk1dg
32. put usb in to ps3 with just Lv2diag.self (4.14Kb)
33. Turn on The Console . wait for automatic turn off
34 . eject usb drive , turn on console and u will be on Rogero CFW CEX
35. DEHASH IF U NEED to go other any fw
this is what i did cos i lost my cex back up
i guess if u got your cex back up u could go from number 22 . dont hold that from me .
it worked perfect for me from number 1
thanks
@haz367
for some of this
|