Originally Posted by baileyscream
if your update creates 3 backups then its the same update for dual boot.
use the update in my pack as its the samsung "multi console" update.
if you get the 00000010 error when you re-set the e3 then just re-start the ps3
wait until you boot to xmb or wait 1-3 min for the ps3 to try to boot then try to back up.
if you still get the error then the clip is probably not on correctly or you dont have enough presure on the clip.
if you have a laptop see if you have one of them fake sd cards in the sd card slot.
i have found these to be the perfect thickness to put on the clip and under the heatsink (fan).
if you still get errors then try soldering tristate on the ps3 board to sbe on the clips ribbon then use flashfun switch up during the whole guide upto the downgrade with fsm.
let me know if that helped
|
well i did use your update.bin still same problem.
i did solder on tristate - still same problems
(i recon i will still get the 4 blinking lights without the clip plugged in)
i do have a Macbook Pro but i don't have any of those fake Sd Cards
maybe if i cut my eraser down to size and stick that in
some 1 told me on the E3 Forums to stack up 8 coins on top of it.
well in 5 hours from now after i back up my system for sage keeping, i will try some of your methods.
and well I'm not to sure but it looks like i will have to do this. is it ok to keep the PS3 out of the plastic case as long the 2 Metal boxes seal the MB in, the Fan plugged in, the BD-Rom Plugged in, the Power and HDD. - but all out of the case.
************* [ - Post Merged - ] *************
but if i try all those things + fiddle with the clip and still fails on me what then? is the E3 Nor Flasher Bricked then? or totaled as in half fried, Ps3 Still loads up just the E3 Flasher cannot initiate.
************* [ - Post Merged - ] *************
Or would it be just faulty that they sent me a fake Nor Flasher