Originally Posted by underwurlde
NAND PS3: used ProgSkeet read NAND, patch, verify, and re-programmed to get PS3 successfully on to Rogero.
Problem though: BlueRay DVD is not original, hence needs remarrying via downgrade & remarry process etc.
So, successfully downgraded to 3.55 OFW.
Then installed Rebug QA_Toggle package to de-hash. Package installed OK and appears under Games XMB.
Now the problem: Running QA_Toggle, screen goes black (good) and then NOTHING. No beeb, no return to XMB. Tried this many times.
Any advice will of course be much appreciated!
Well if you went to 3.55OFW, you're unhashed as otherwise the PS3 would be bricked.
The easiest way to unhash a console is to get it into Factory Service Mode, then add lvl2diag.self + 3.55OFW or 3.41 at root of USB then plug it into the RIGHT USB Port. Shutdown the console and turn it back on. it's going to install (blackscreen, PS3 shutdown by itself once it is done). Do that TWICE! Means once the PS3 shut off, plug the USB in a computer and check the log, at the end it's gonna tell if it is successfull. Then plug it back into the PS3 again and turn on and wait until it turns off again then you re good.
If it is unsuccesful, it doesn't count as one flash. I had to use the lvl2diag.self NoBD patched to get it to work even with my bluray connected
Envoyé depuis mon Nexus 7 avec Tapatalk