Originally Posted by KuroiKami2013
problem is when i patch my dump and reflash the patched dump. the ps3 turn on for a bit then turn off. what do i do from there?
|
Originally Posted by KuroiKami2013
it will be on4.31 fsm. is that ok?
|
You said you patched and flashed your patched dump. The patches allow for FSM firmware install.
If the console has been flashed with the patched dump, and is in FSM, and you don't have USB with Lv2diag.self to call what function you want, it will shut off when it can't find it.
Put the files I linked on the root of your fat32 formatted USB. Put the USB in the right port and turn the PS3 on. If it starts installing the firmware, then that was your problem. Make sure the hdd is connected when you do it.
If it just shuts off again, that means:
1. You flashed a non valid dump and bricked. To fix solder the wire to keep the ps3 on and flash a patched valid dump.
2. Your clip or soldering is not correct, so the flashing did not flash correctly. To fix, solder the wire to keep the ps3 on and reseat the clip or correct the soldering.