Originally Posted by haz367
if bootloader_0 is incomplete..that guide wont get u nowhere..only with ros0/1 coreos brick..bootloader is per console and must be complete as we all know..
u could reclip and redump..verify with flowrebuilder and check extracted dump for "complete" bootloader after that..
That is what the guide tells you to do.
You can still get a good dump, after getting a bad one and flashing the bad one. If the clip was not seated properly.
Originally Posted by stepheng67
Well I did as the directions said with sw1 and 3 up all others down. Bootloader is 190k but I'm sure that doesn't mean much. I did the quick compairs to the ultimare fool proof guide and it looks ok but then again the dump I sent you looked ok to the guide. I can't get to the guides that have links in steps 5 and 6 that you sent me ([TUT] How to unbrick w/E3 flasher, without a valid backup bios (dump) ) if this is SOSDD then I guess I'm at the endof the line with a paper weight... correct? can't use a dump from an other CECH-2001a? I'm e-mailing it off now so when you get a chance can you take a quick look.
So you reseated the clip and now your dump has bootloader at 190k?
I am not sure what else you are saying. It is all jumbled up with no punctuation.
Something about not being able to get the links, from steps 5 and 6?
It seems ps3devwiki is down, again?
Send me your dump, I will check it and patch it if it is good enough.