Originally Posted by MJ999
Na, Soldered it correctly.
EDIT : Do these pins have to be soldered on to the board ?
@Mr.Dutch
|
they have no function, and btw they are soldered to ground.
do you have a meter to check if the 5V reach the board?
EDIT:
@
MJ999
, btw with no light you mean not even a standby led?
also measure resistance between the 4 solder points (pins that are next to each other) and all the pins to ground if there's not a short.
obvious pin 3 is ground, pin 2 is technically ground?