Originally Posted by 3absiso
Hey My Friend;
First we have to make sure the clip is secure,
first flash back your original dump then pack it up again if they match then the clip is secured correctly.
then Try to flash your original Dump Via Fun Flash,
then flash it back via (all switches down), and look what happens. if still nothing.
patch your dump via Rogero and flash it with all switches down.
|
no
dont flash it back
he has said its a bad dump!
************* [ - Post Merged - ] *************
Originally Posted by x7desu
Looks like the brick was caused by bad dump:
ps3hax.net/showpost.php?p=538332&postcount=413
tvrk_prog0 : Not Valid
When restore original dump or dump patched by PS3 Nor Dump Patcher v0.01 under Flash Fun mode, system turns on (screen is black), but not enters to FSM or Recovery menu. Same when use e3_downgrade.bin patching by flasher.
Is there any way to restore system?
|
stop flashing the ps3 with a bad dump.
do a new dump as it is now. rename it test 1.bin
you need to re-seat the clip
then do a dump
compare it to test 1
your looking for a dump that is different from that test 1 dump.
if its the same then re-seat the clip again
and do another dump.
if its not different then i think you will need to solder the linker to the ps3's test points.
but remember dont flash anything.