[Ann]

This tutorial was written by Greg over at www.PS3-Hacks.com

How to Downgrade your PS3 with E3 Card Reader :

This method is almost identical to PS Downgrade. Also, I suggest you backup your saved games — they’ll be long gone after the downgrade. I made that mistake once.

Download the required files Here :
E3 Downgrade (RAR pass: iLoveE3) http://www.ps3-hacks.com/file/214
E3 Downgrade 3.41 Modified PUP (and supporting Lv2diag.self files) http://www.ps3-hacks.com/file/215

Updating E3 Card Reader with the downgrade software is extremely simple: Connect the device to your PC and drag-n-drop the “e3downgrade 12.03.bin” file to the “E3Upgrader” drive. That’s it — your device has been updated. Safely eject E3 Card Reader and now lets perform the actual downgrade.

Insert E3 Card Reader that has been programmed with the downgrade software into your PS3.

Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up the red LED followed by the blue LED.

Turn off system via menu.

Remove E3 Card Reader dongle and turn on console to make sure you are in Factory/Service Mode. You will see a huge red box on the screen saying Factory/Service Mode. Turn the PS3 off again.

Load any blank FAT32 USB flash drive with 2 files in the root directory:
Modified 3.41 PUP
Lv2Diag.self (File 1)

These must be the only files on the USB drive and must be placed in the main (root) directory.

Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see a black screen but the PS3 HDD light will flash.

The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.

Remove the flash drive and turn on the console, you will still be in Factory/Service Mode. Please verify you have downgraded successfully to version 3.41 by going to “System Information”. Turn the PS3 off.
(Optional) – If you wish to downgrade to any older firmware you can follow steps 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).

Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.

Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.

Remove USB flash drive and turn on your console again. You will be out of Factory/Service mode and back in retail mode with your chosen firmware version installed. You will need to go through and configure everything again — PS3 video, audio etc…

Once you’re done you can restore E3 Card Reader with the dual-booting Hermes v4b and PL3 software.

A big thanks to Greg over at PS3-Hacks.com for writing this tutorial.
Source : http://www.ps3-hacks.com/2010/12/04/...3-card-reader/
and file source here :
http://www.ps3-hacks.com/2010/12/03/...ding-ps3-3-50/

[howardtheduck22]

please take note that if you have recently downloaded the latest firmware version 3.55 that this no longer will work on your system, in this update sony has patched the ability to do this. sony has officially caught wind of this way too fast. so if you would like to do this. DO NOT UPDATE TO 3.55!!

[$n!pR]

You can still get into factory service mode, just not downgrade...

[Gravehart]

Originally Posted by howardtheduck22 please take note that if you have recently downloaded the latest firmware version 3.55 that this no longer will work on your system, in this update sony has patched the ability to do this. sony has officially caught wind of this way too fast. so if you would like to do this. DO NOT UPDATE TO 3.55!!

my buddy jake downloaded the 3.55 on my system right before i was going to jailbreak it when i got home.... so this means i will never be able to jailbreak it? or il just need to wait awhile?

[townsendj1]

can the e-3 reader be used to jailbreak the machine as well?

[GregoryRasputin]

Originally Posted by townsendj1 can the e-3 reader be used to jailbreak the machine as well?

Of course it can.

[AsSiTcH]

Originally Posted by Gravehart my buddy jake downloaded the 3.55 on my system right before i was going to jailbreak it when i got home.... so this means i will never be able to jailbreak it? or il just need to wait awhile?

there is currently no way to jb a 3.55. who knows what the future holds.

[Niggster]

For some reason, I'm stuck in 3.41 (3.56) and out of factory service mode. I can't get back in. What do I do?

[thorshammer1138]

I am on 3.15 I am looking to get to 3.00 I have the E3 card reader and have downloaded the files from this video tut here ---> YouTube - Downgrade PS3 3.50 - E3 Card Reader Review and Tutorial - PSfreedom Psgroove my question is do I need to upgrade to 3.41 to downgrade to 3.00??? or can I switch out the firmware of 3.41 with the 3.00???

[thorshammer1138]

Originally Posted by thorshammer1138 I am on 3.15 I am looking to get to 3.00 I have the E3 card reader and have downloaded the files from this video tut here ---> YouTube - Downgrade PS3 3.50 - E3 Card Reader Review and Tutorial - PSfreedom Psgroove my question is do I need to upgrade to 3.41 to downgrade to 3.00??? or can I switch out the firmware of 3.41 with the 3.00???

I didit whewwwww was a little scared but it worked sometimes you just gotta do it....