[Dudshl]

Originally Posted by jeerum dospiedra v2 is not working for me, i have sur-001 motherboard with S29GL128N90TFIR2. can someone patch it my flash, maybe i get it wrong :D no success, just red blinking. i just dont get it

Give me your original NOR dump and i patch it.

[boxmodz]

Originally Posted by jeerum dospiedra v2 is not working for me, i have sur-001 motherboard with S29GL128N90TFIR2. can someone patch it my flash, maybe i get it wrong :D no success, just red blinking. i just dont get it

patched your flash here http://www.upload.ee/files/1744638/1new.bin.html

[jeerum]

now i have problem, i get to service mode, but then ps3 just shut down, hard drive is blinking few times and thats it.
ok now i get it, usb drive must be in right and jig in left.

[ICCcode]

Hello all,

First off, nice looking program Judges. I am on a CECHL04 MB version VER-001. I think my problem is probably due to the board. I have verified my original dump with norpatch.exe. I have been able to flash several different CFW's but I end up getting trophy errors sporadically. I thought maybe this was just the CFW I was using, but I have tried building my own, rebug, kmean 3.55 no check, rogero and the OtherOS versions. I have been able to install each of them, but I still get the errors. I have been using the dospiedra v2 downgrade method. Has anyone else been having this issue and if so...any luck fixing it?

Thanks in advance

[butnut]

Originally Posted by ICCcode Hello all, First off, nice looking program Judges. I am on a CECHL04 MB version VER-001. I think my problem is probably due to the board. I have verified my original dump with norpatch.exe. I have been able to flash several different CFW's but I end up getting trophy errors sporadically. I thought maybe this was just the CFW I was using, but I have tried building my own, rebug, kmean 3.55 no check, rogero and the OtherOS versions. I have been able to install each of them, but I still get the errors. I have been using the dospiedra v2 downgrade method. Has anyone else been having this issue and if so...any luck fixing it? Thanks in advance

After searching for "downgrade trophy error"

http://www.ps3hax.net/search.php?searchid=846472

[ICCcode]

Originally Posted by jeerum now i have problem, i get to service mode, but then ps3 just shut down, hard drive is blinking few times and thats it. ok now i get it, usb drive must be in right and jig in left.

You begin that process by putting the jig in the right most usb port. Once it shutsdown replace your jig with a usb drive that has your PS3UPDAT.pup and the hacked Lv2diag.self. The PS3 will stay on for a bit and then shutdown again. You can check the jaicrab logfile created to make sure the update was applied correctly. If so, delete the logfile and replace the hacked Lv2diag.self with the standard 3.55 file. The PS3 will power on and then reboot again. You should now be in your CFW.
************* [ - Post Merged - ] *************

Originally Posted by butnut After searching for "downgrade trophy error" http://www.ps3hax.net/search.php?searchid=846472

Thanks for the link. Unfortunately, I have read the five of those already. I have tried both the initial release of rogero's cfw created from a standard PUP as well as the version 2 based off of kmeaw. I am not experiencing the blueray playback problem. The third link is related to rogero v1 which I have also read and tried. The Progskeet article while interesting, I think is irrelevant to my issue since the fix was to upgrade his version of winskeet. The last link is a good collection of homebrew apps, but doesn't address the issue.

Additionally, I have also attempted altering the binary flash directly with visual studio. After reading a breakdown on demonhades.org, I have an additional question. Does the PS3UPDAT.PUP write different files to the flash based on the board revision. The PS3 dev wiki had a binary patch specific to JTP-001 boards. I have not seen this answered in my reading, but my guess would be that during the upgrade process a flash (or write to flash is generated based upon board revision, and perhaps other factors

[butnut]

Originally Posted by ICCcode Thanks for the link. Unfortunately, I have read the five of those already. I have tried both the initial release of rogero's cfw created from a standard PUP as well as the version 2 based off of kmeaw. I am not experiencing the blueray playback problem. The third link is related to rogero v1 which I have also read and tried. The Progskeet article while interesting, I think is irrelevant to my issue since the fix was to upgrade his version of winskeet. The last link is a good collection of homebrew apps, but doesn't address the issue. Additionally, I have also attempted altering the binary flash directly with visual studio. After reading a breakdown on demonhades.org, I have an additional question. Does the PS3UPDAT.PUP write different files to the flash based on the board revision. The PS3 dev wiki had a binary patch specific to JTP-001 boards. I have not seen this answered in my reading, but my guess would be that during the upgrade process a flash (or write to flash is generated based upon board revision, and perhaps other factors

I was only trying to let you know that other people have had trophy errors after downgrading.

[qljiea784hl1]

Thanks and great work. I was wondering when you were going to pop up with this. Going to give this a go.

[Dudshl]

Originally Posted by Dudshl Now I have DIA-002 with Samsung K8Q2815UQB chip. I can not dump this chip correctly: all dumps have different MD5. I try dump with all NORway versions (0.3,0.4b9,b10,b12) 3 GND pionts soldered. Teensy resoldered twice. Usually chip manufacturer and type detects correctly, but sometimes chip manufacturer and/or type are "unknown". Any Ideas?

When I resolder Teensy to 5V - I get many correct dumps with identical MD5 and norpatch recognize correct PRG0,PRG1,ROS0,ROS1.
It do not wont to write in 5V-mode. I make "erasechip" and now I can not programm it.

[boxmodz]

Originally Posted by Dudshl When I resolder Teensy to 5V - I get many correct dumps with identical MD5 and norpatch recognize correct PRG0,PRG1,ROS0,ROS1. It do not wont to write in 5V-mode. I make "erasechip" and now I can not programm it.

have you got the regulator on the teensy?
have your tried the other writing commands?