[bahaa_monier]

Originally Posted by Dudshl Do You have Your fist dump without any changes?

yes i have it .
but it's byteswapped .
when write it no responding
here is it :

http://www.megaupload.com/?d=KKFO7RQ4

can fix please ?

[Hikage]

Originally Posted by bahaa_monier yes i have it . but it's byteswapped . when write it no responding here is it : http://www.megaupload.com/?d=KKFO7RQ4 can fix please ?

i think you have a problem when you byteswap your dump with flowrebuilder found here

your hdd name is "OTHSBI AKM2356SG X H Y G0D43EBQ" but if read the dump without byteswap you have the correct name "TOSHIBA MK3265GSX H Y0G4DE3QB"

for mine problem:

Originally Posted by Dudshl You can swap easer: 1. Dump NOR when it work`s with 3.72 firmware with fujitsu HDD; 2. Downgrade it with dospeidras v2 method with seagate 500GB; 3. Dump NOR when it work`s with 3.55 firmware when it works with toshiba 320Gb; To swap it to 3.72 - just flash 3.72 dump and change HDD to fujitsu; To swap it to 3.55 - just flash 3.55 dump (not dospiedras dump, Your dump after full downgrade) and change HDD to toshiba;

1) I start with ps3 on 3.72 with the fijitsu hdd, i dump the NOR named "swap 3.72".
2) Downgrade with the toshiba, i have backup my hdd before.
3) dump NOR named "swap 3.55"

Now when i swap to the 3.72 with the hdd on it, my ps3 go to the recovery mode like when i downgrade.

I press PS button, it say '"the system doesn't work normally, please reinstall firmware 3.55".
If i press PS button, the ps3 restart and go to the main page of the downgrade.

[bahaa_monier]

Originally Posted by Hikage i think you have a problem when you byteswap your dump with flowrebuilder found here your hdd name is "OTHSBI AKM2356SG X H Y G0D43EBQ" but if read the dump without byteswap you have the correct name "TOSHIBA MK3265GSX H Y0G4DE3QB"

so is it possible to mix it from clean dump or another dump from another person and replace some hexs ??????

or reverse the first lines only ?
or is it completly damaged ?

in XBOX you can download clean nand and transfare sectors from one to another to make it work easily . is any another idea like this in ps3 ??????

or what can i do ?

[Dudshl]

Originally Posted by bahaa_monier yes i have it . but it's byteswapped . when write it no responding here is it : http://www.megaupload.com/?d=KKFO7RQ4 can fix please ?

http://www.megaupload.com/?d=V7CI5KME
http://www.megaupload.com/?d=OTW4YL9H

Try flash this dumps.
May be one will works.
************* [ - Post Merged - ] *************

Originally Posted by Hikage Now when i swap to the 3.72 with the hdd on it, my ps3 go to the recovery mode like when i downgrade. I press PS button, it say '"the system doesn't work normally, please reinstall firmware 3.55". If i press PS button, the ps3 restart and go to the main page of the downgrade.

Did You flash NOR with 3.72 dump before you spaw HDD?
I think You did not

[bahaa_monier]

Originally Posted by Dudshl http://www.megaupload.com/?d=V7CI5KME http://www.megaupload.com/?d=OTW4YL9H Try flash this dumps. May be one will works. ************* [ - Post Merged - ] ************* Did You flash NOR with 3.72 dump before you spaw HDD? I think You did not

WOW
i will try it now .
Thank you Dudshl
is it my dump fixed or your one??????????

[Dudshl]

Originally Posted by bahaa_monier WOW i will try it now . Thank you Dudshl is it my dump fixed or your one??????????

There is Your dump: one patched with dospiedras v2, second - byte swapped and patched with dospiedras v2

[bahaa_monier]

it's same .,
turning on , nothing else
the write take 1:48 m
what is it ?
why it is fast ?
can i make one mixed between both ??????

[Hikage]

Originally Posted by Dudshl http://www.megaupload.com/?d=V7CI5KME http://www.megaupload.com/?d=OTW4YL9H Try flash this dumps. May be one will works. ************* [ - Post Merged - ] ************* Did You flash NOR with 3.72 dump before you spaw HDD? I think You did not

i off my ps3 disconnect teensy swap hdd, connect and write swap.

i try flash swap 3.72 with hdd 3.55 on the ps3 after shutdown ps3 swap hdd but when i launch ps3 i have the same message "please reinstall 3.55"

[Dudshl]

I have THE PROBLEM:
I make erasechip before dump, but I stop erasing and save about a half of data. norpatch detect only ros1.
Firmware version was 3.56.
Is there any ways to repair or "re-make" erased data? Or It dies?

Dump file: http://www.megaupload.com/?d=S35H48DG

[cvp]

Originally Posted by bahaa_monier it's same ., turning on , nothing else the write take 1:48 m what is it ? why it is fast ? can i make one mixed between both ??????

I have two days befor the same problem. Befor you write you have erase you nor... NORway.py.py COMxx erasechip

Than write again