[bahaa_monier]

Originally Posted by cvp I have two days befor the same problem. Befor you write you have erase you nor... NORway.py.py COMxx erasechip Than write again

I did
but no result .

[cvp]

and you tried this one:

NORway.py COMxx erasechip ....than...
NORway.py COMxx writewordubm dump.bin ....(~20 minuts) or if its not work better than... erae again and try this:
NORway.py COMxx writeword dump.bin ....(~50 minits)

[Hikage]

my problem is solved why i don't no, now i can fast swap 3.72 <> 3.55

[bahaa_monier]

Originally Posted by cvp and you tried this one: NORway.py COMxx erasechip ....than... NORway.py COMxx writewordubm dump.bin ....(~20 minuts) or if its not work better than... erae again and try this: NORway.py COMxx writeword dump.bin ....(~50 minits)

I tried erase and write , it take ( 6:30m ) but not working .
and tried writewordubm but didn't work .
can someone send me his 3.55 dump ????????
pleasssssse

[judges]

Originally Posted by bahaa_monier I tried erase and write , it take ( 6:30m ) but not working . and tried writewordubm but didn't work . can someone send me his 3.55 dump ???????? pleasssssse

It won't be of any help to you. I don't know how you've created your dump, but it's just partly byte-swapped. That wouldn't even be the worst thing if you'd knew where the byte-swapping ended, but what's really not fixable is that the metldr area (0x810-0x2F010) of your dump is total rubbish (byte-swapped or not). And this area is console specific and you cannot simply replace it from another console. Someone may correct me if I'm wrong.

[bahaa_monier]

Originally Posted by judges It won't be of any help to you. I don't know how you've created your dump, but it's just partly byte-swapped. That wouldn't even be the worst thing if you'd knew where the byte-swapping ended, but what's really not fixable is that the metldr area (0x810-0x2F010) of your dump is total rubbish (byte-swapped or not). And this area is console specific and you cannot simply replace it from another console. Someone may correct me if I'm wrong.

so
it's dead forever !!!
is it ?
or can fix it ?

[cvp]

its see so that you dump bad ps3 informations from your ps3. Problem is, that you cant take other ps3 dump. If you do that, your ps3 is not starting. I Hope o for you, that someone find a good solution for that problem.

[cvp]

So its over... i think my NOR Flash is dead. After the Upgrade to 3.72 i have play like 3-4 hour BF3 Online.... after 2 hour Gaming i see a Error Code in Game like on XMB Error Code... damn i dont write the Error Code... but i can play 1-2 hour without Problems. Than i want to close the game and return to XMB... the PS3 is freez. I cant start again. I write my downgrade.bin and put my cfw hdd b inside... its start... than i put the console into Service mode for flash the regero CFW. but it isnt work... the ps3 start sometimes for few seconds and shutdown, no Red/Green light. Sometimes is it on, but the flashing over jig files and cfw is not working....

so for now... i can read the nor... i can erase the nor (or its not erase? i check the LED on Teensy... its blinking on the beginn, but not more... after three minits tell me the programm, its finisch!), but i cant write anymore

its retry 20 times with writeword/writewordubm and write command.
Once have write on the 3. Retry, but it haves not working... now i try manytimes... and nothing... it cant be write (Beta 03/04)

Pinging... Set SB to tristate NOR chip manufacturer: Spansion (0x01) NOR chip type: S29GL128 (0x7e2101) Checking sector protection... No protected sectors found! STATUS_TRIST_N: True STATUS_RESET_N: True STATUS_READY: True STATUS_CE_N: False STATUS_WE_N: True STATUS_OE_N: True Resetting NOR... Ready. Writing... 0 KB / 16384 KB (1. Retry) (2. Retry) (3. Retry) (4. Retry) (5. Retry) (6. Retry) (7. Retry) (8. Retry) (9. Retry) (10. Retry) (11. Retry) (12. Retry) (13. Retry) (14. Retry) (15. Retry) (16. Retry) (17. Retry) (18. Retry) (19. Retry) (20. Retry) Traceback (most recent call last): File "C:\Users\Chris\ps3\NORway.py", line 702, in <module> n.writerange(addr, data, False, True) File "C:\Users\Chris\ps3\NORway.py", line 512, in writerange self.program(addr/2, data[:0x20000], wordmode, ubm) File "C:\Users\Chris\ps3\NORway.py", line 444, in program raise NORError("Verification failed") __main__.NORError: Verification failed

i think i have now to buy a NOR Flash... but i dont know if this is the right Flash:

S29GL128P90TFIR20
http://de.farnell.com/jsp/search/pro...sp?sku=1791253
http://de.mouser.com/search/ProductD...252bXofg%3D%3D

on my Spansion NOR Flash is S29GL128P90TFIR2 inside ... without the "0" "zero" at the end. Is it the same? or a another NOR?

[Dudshl]

Originally Posted by cvp its retry 20 times with writeword/writewordubm and write command. Once have write on the 3. Retry, but it haves not working... now i try manytimes... and nothing... it cant be write (Beta 03/04)

Make erasechip then dump. Is it clear?
If it clean - try write in 5V mode.
Try v04b10.

I soldered switch 3.3v/5v and now I need not disconnect teensy.

[jeerum]

check nor pins, maybe need only little soldering.