[lunex]

I have Teensy 1.0 board and I'm kind of confused which hex I need to transfer onto device to get it work with e3 flasher?

[loller]

just put the downgrade.bin on tf card and start the e3 flasher( whit jumper on correct position ofc), u dont need teensy

[lunex]

5： Plug a downgrade jailbreak device to right USB port(near BD drive) ,make correctly downgrade step to enter factory service mode (press power and then eject), PS3 will turn off autolly after a while.

I must enter serivce/factory mode. Khalkedon also done that: http://www.youtube.com/watch?feature...2E4tU6c#t=978s but didnt explain how to "already prepared" a dongle ;p

[loller]

man "prepare a dongle" isnt the cheapest/faster way since u can use a psp or a 11$ dongle
But here your guide: u need teensy loader software ( http://www.pjrc.com/teensy/loader.html) a pc and a usb cable that's all

http://www.ps3-ita.com/6510-74-Come_..._PSGroove.html

[lunex]

Originally Posted by loller man "prepare a dongle" isnt the cheapest/faster way since u can use a psp or a 11$ dongle But here your guide: u need teensy loader software ( http://www.pjrc.com/teensy/loader.html) a pc and a usb cable that's all http://www.ps3-ita.com/6510-74-Come_..._PSGroove.html

u don't understand what I mean. I want to know which hex file I'm supposed to put on my teensy 1.0 board to get factory/service mode? Because psgroove surely has nothing to do with that ;p

btw. i'm not an idiot, I know how to use teensy loader xD

[carldenning]

Originally Posted by lunex u don't understand what I mean. I want to know which hex file I'm supposed to put on my teensy 1.0 board to get factory/service mode? Because psgroove surely has nothing to do with that ;p btw. i'm not an idiot, I know how to use teensy loader xD

check ths link out , dl and extract the file and chosse the hex file you want , simple as m8 http://www.ps3hax.net/downloads.php?do=file&id=538

[lunex]

Originally Posted by carldenning check ths link out , dl and extract the file and chosse the hex file you want , simple as m8 http://www.ps3hax.net/downloads.php?do=file&id=538

PSGrade... didn't hear about that, thanks ;] e3 could at least mention that name...

[carldenning]

Originally Posted by lunex PSGrade... didn't hear about that, thanks ;] e3 could at least mention that name...

if i remember right as it been along time since i used them psgroove,psfreedom was jailbreaking and psgrade was downgrading

glad i could help

[kman82]

I used an e3 card reader. There's a downgrade.bin file that goes on the upgrader drive of the e3card reader which flashes thee reader to be used like khalkedon does in his video. This part I also found confusing cos he just pulls a dongle from his ass and said nothing about what kind of dongle it is

[lunex]

Originally Posted by kman82 This part I also found confusing cos he just pulls a dongle from his ass and said nothing about what kind of dongle it is

so... is it psgrade dongle for sure?