[pbanj]

@Rogero released 360 Multi Builder - an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images

current ver is 0.91

fixes and additions
- Bug Fixed (Problem with the smc.bin file) Thanks LordX for reporting.

- Added Xenon support for both Xell/ECC and RGH builds. (Credits to Team-Xecuter)

- Added Jasper 16MB small Block support (config 01198010) to Jasper 16MB build options.
(This must be used only with some rare Jasper consoles with Nand Controller Config 01198010)

- Added the option to build Slim/Trinity RGH image with FCRT check Disabled.
(This is needed in rare scenarios,example: using FAT drive to swap Slim non-Flashable drive)

- Added full SMC hacks to JTAG builds (AUD_CLAMP, AUD_CLAMP+TRAY_OPEN and CYGNOS360)

- Added latest xell v0.991 to ECC image creation (already added before to RGH/JTAG images)

- Changed the main executable package to avoid the false positive problems with "Antivir"

- Changed the Folders Organization to prevent any accidental files deletion
(Now the User have to work with only one folder "Data\_my_images\" to add/remove files)

- The Program now uses a Full CB Compatibility Table to check the CB for JTAG/RGH compatibility.

- Replaced the Python Script responsable for ECC creation with a proper executable.

get it from tortuga-cove



-------------------------------------------------------------------------------------------------


will always give you the newest ver
source tortuga-cove

[pbanj]

ver 0.3 is out now has these fixes
link for it is still the same as it was in the first post

- Updated Dashlaunch patches to latest version 2.26 / thanks cOz
- Added the option to build the image without Dashlaunch patches too.
- Added the option to build the Jtag image with SMC = AUD_CLAMP.
- Added full checks of different CB versions to the Xell/ECC script.
- Added RawFlash v3 / "xenon.elf" to "Data" folder with flashing note.
- Fixed the Fans Speed back to auto (it was 70% in previous version).

[MajorDisaster]

Nice, Thank you...

[pbanj]

>> Rogero released version 0.4 of 360 Multi Builder - an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images

What's new/fixed:
* Returned to using Dashlaunch v2.25 patch-set to avoid the "PlayDVD" problem with some Liteon Drives that requires the fcrt.bin for proper function.
* Fixed a bug in the Xell/Ecc script regarding Jaspers with CB version 6751.

http://www.tortuga-cove.com/forums/v...8&p=1241#p1241


hope this isn't old news

[pbanj]

ver .5 of 360 multi builder is out

- Added Support for xeBuild and latest Dashboard version 14699.
- Updated patches to Latest Dashlaunch v2.27 Patchset.
- now using xeBuild built-in "fcrt.bin" extractor for Trinity images.
- Added RGH smc files for proper RGH image building.
- Added Xenon Retail Image build option.

source link in the first post

[pbanj]

360_Multi_Builder_v0.7 on 11/12/2011
----------------------------------------------------------------
- Added a default "launch.ini" to Flash when image is created with Dashlaunch.
* Button_A=Hdd:\FSD\default.xex , default=Usb:\FSD\default.xex , rest=default
* No more need to run the Dashlaunch Installer on 360 at all after flashing the image.
- Added the option to auto-build custom "launch.ini" per user preference.

Credits to xeBuild / Dashlaunch devs, especially cOz.
Credits to ir0nman for this usefull tool : "buildini.exe"

[pbanj]

LINK IN FIRST POST

360_Multi_Builder_v0.83 on 06/03/2012
----------------------------------------------------------------
- Added Support for building ECC image for Slim/Trinity updated to Dash 14717/14719 (CB9230)
- Updated DashLaunch to latest version 2.32 (Respect to c0z for his great work and it's so sad indeed to see him leave).

[pbanj]

link in first post

360_Multi_Builder_v0.91 on 11/03/2012
----------------------------------------------------------------
- Bug Fixed (Problem with the smc.bin file) Thanks LordX for reporting.

- Added Xenon support for both Xell/ECC and RGH builds. (Credits to Team-Xecuter)

- Added Jasper 16MB small Block support (config 01198010) to Jasper 16MB build options.
(This must be used only with some rare Jasper consoles with Nand Controller Config 01198010)

- Added the option to build Slim/Trinity RGH image with FCRT check Disabled.
(This is needed in rare scenarios,example: using FAT drive to swap Slim non-Flashable drive)

- Added full SMC hacks to JTAG builds (AUD_CLAMP, AUD_CLAMP+TRAY_OPEN and CYGNOS360)

- Added latest xell v0.991 to ECC image creation (already added before to RGH/JTAG images)

- Changed the main executable package to avoid the false positive problems with "Antivir"

- Changed the Folders Organization to prevent any accidental files deletion
(Now the User have to work with only one folder "Data\_my_images\" to add/remove files)

- The Program now uses a Full CB Compatibility Table to check the CB for JTAG/RGH compatibility.

- Replaced the Python Script responsable for ECC creation with a proper executable.