[judges]

Originally Posted by afiser13 when you say "- Power off your PS3 (disconnect Teensy if PS3 doesn't boot when restarted)" do you mean desolder the teensy from the ps3 or just disconnect the usb? im really hoping its the latter. lol

It is the latter..

[dandza]

Hello everyone, long time no see

Teensy has some problems with this combination of mobo/ic

JSD-001 and Samsung K8P2716UZC-QI4D (its the one that uses 128/128 settings)

Problem is when reading dump you get bad reading on random sectors every time.
Only with 5V mod it dumps good (every dump is same and correct), but then the problem is writing. It doesnt work either with 3V and 5V.
with 3V i got verify error at sector 0 and with 5V i think it was sector 3 or maybe 2 that gave me that same error...

The same problem is with other members, you can check it here http://www.ps3hax.net/showthread.php?t=30084

PS Progskeet has the same problem, i tested that also...

judges pm me when you have some time...

[judges]

Originally Posted by dandza Hello everyone, long time no see Teensy has some problems with this combination of mobo/ic JSD-001 and Samsung K8P2716UZC-QI4D (its the one that uses 128/128 settings) Problem is when reading dump you get bad reading on random sectors every time. Only with 5V mod it dumps good (every dump is same and correct), but then the problem is writing. It doesnt work either with 3V and 5V. with 3V i got verify error at sector 0 and with 5V i think it was sector 3 or maybe 2 that gave me that same error... The same problem is with other members, you can check it here http://www.ps3hax.net/showthread.php?t=30084 PS Progskeet has the same problem, i tested that also... judges pm me when you have some time...

What NORway version did you use? Beta 12? Did you try all three writing modes? I've one user confirming beta 5 did work for him using that exact mobo/nor combo (beta5: http://www.multiupload.com/7MBKHLQ5MC).

And you can pm me anytime..

[underdik]

Halo all! I have 250B with Spansion NOR.
Using Norway beta 12
I dump&patch using Downgrade V2 method, but after when i write NOR to PS3 it stops at sector "0". After that Ps3 can't boot and "power off" after 2 sec.
I flash my teensy with norway 0.3 from here https://github.com/hjudges/NORway and swith it to 5V and flash again without any errors (5V!)
My console stays not bootable, but she dont power off and hasn't video signal
Here is my original downgrade http://dl.dropbox.com/u/2885438/250B_orig.bin, and here is my patched http://dl.dropbox.com/u/2885438/250B_patched.bin.

Anyone cat tell me what i doing wrong? Why my console dos'n boot?

P.S.: Now Teensy not detecting at 3.3V

Click here to see full text

D:\MI\ps3_downgrade\NORway_beta12>NORway.py com11 write 250B_patched.bin
NORway.py v0.4 beta - Teensy++ 2.0 NOR flasher for PS3 (judges@eEcho.com)
(Orignal noralizer.py by Hector Martin "marcan" <hector @marcan soft.com>)

Pinging...
Set SB to tristate

NOR chip manufacturer: Spansion (0x01)
NOR chip type: S29GL128 (0x7e2101)

Checking sector protection...
No protected sectors found!

STATUS_TRIST_N: True
STATUS_RESET_N: True
STATUS_READY: True
STATUS_CE_N: False
STATUS_WE_N: True
STATUS_OE_N: True

Resetting NOR...
Ready.

Writing...
16384 KB / 16384 KB
Done. [0:07:19.440000]

D:\MI\ps3_downgrade\NORway_beta12>NORway.py com11 release
NORway.py v0.4 beta - Teensy++ 2.0 NOR flasher for PS3 (judges@eEcho.com)
(Orignal noralizer.py by Hector Martin "marcan" <hector @marcan soft.com>)

Pinging...
Set SB to tristate

NOR chip manufacturer: Spansion (0x01)
NOR chip type: S29GL128 (0x7e2101)

Checking sector protection...
No protected sectors found!

STATUS_TRIST_N: True
STATUS_RESET_N: True
STATUS_READY: True
STATUS_CE_N: False
STATUS_WE_N: True
STATUS_OE_N: True

Resetting NOR...
Ready.

NOR Released

[Dudshl]

If teensy not detected at 3.3V - check regulator soldering.

When teensy alive - make erasechip, then try write with command writewordubm (do it on 3.3V with beta12)

[underdik]

Originally Posted by Dudshl If teensy not detected at 3.3V - check regulator soldering. When teensy alive - make erasechip, then try write with command writewordubm (do it on 3.3V with beta12)

Thanx! I'm checked: flash & read my NOR, then compare it and its same...
Teensy still not detected at 3.3V

Dudshl can you check my dump?
P.s.: I flash my "backup.bin" and nothing.. WTF?

[Dudshl]

Originally Posted by underdik Thanx! I'm checked: flash & read my NOR, then compare it and its same... Teensy still not detected at 3.3V Dudshl can you check my dump? P.s.: I flash my "backup.bin" and nothing.. WTF?

It looks like Your orig_nor_dump has errors. May be shorts or bad contacts. Test Your solder it with multimeter

[underdik]

Originally Posted by Dudshl It looks like Your orig_nor_dump has errors. May be shorts or bad contacts. Test Your solder it with multimeter

Contacts are normal..
Brick? No way to restore?

[bahaa_monier]

i have 2 PS3s with same problem , ( NO ORIGINAL DUMB )
but i found in E3 Flasher website , there is way to fix it , but didn't try it .
can some one confirm ?
http://www.e3-tech.net/

[underdik]

Originally Posted by bahaa_monier i have 2 PS3s with same problem , ( NO ORIGINAL DUMB ) but i found in E3 Flasher website , there is way to fix it , but didn't try it . can some one confirm ? http://www.e3-tech.net/

I'll test it tomorrow! Thx.