[weiyuezz]

so, that is all i needed? buy the E3 product and these files are all I need to downgrade ps3 ?

[kalsta]

Originally Posted by weiyuezz so, that is all i needed? buy the E3 product and these files are all I need to downgrade ps3 ?

You still need a jailbreak dongle as well (PSJailbreak, E3 Card Reader, PS2Go, etc)

[xxdylanxx]

Originally Posted by kalsta You still need a jailbreak dongle as well (PSJailbreak, E3 Card Reader, PS2Go, etc)

can i use my amazebreak to enter factory mode??? been reading from page 1 but still not clear for me.. i only have amazebreak dongle here sitting around...


BTW i also bricked my slim but manage to get it working again,
i bricked it after restoring.. im on 3.73OFW read bios,recover then brick.. soldered the needed wire for unbrick process and follow e3 tut for unbricking but no luck.. it just power for 3 secs then shutsdown


what i did was put switch 1 up and all switch down fun flash mode
power up ps3 no sd card at TF
put downgrader.bin from e3 site and my backup bios to sd card,
put SD in TF without powering off your ps3
flip the switch 6 up and everything else down
and press start
after flash i now see video
"connect usb to controller and press ps button"

now to factory mode..

[poyeshsoft]

hi

plz help me

I got the machine to complete installation.
But I get an error.
I error in the backup.

11000100

How do I solve my problem?
My system is version 3.73.

And please explain the following error:
11000010

[TDCroPower2]

look to the log file on your microsd and you have the answer!

[poyeshsoft]

start logging...backup PS3 BIOS.not original PS3

What is the purpose of this sentence?

my IC nor name: mx29gl128elt2i-90g

[Rolando454]

(Thank you) Khalkedon güzel Bir Video

[sanfree]

Thanks for your videos, I used your videos as reffrence for my downgrade, i have managed to downgrade 1 ps3, I'm now trying to downgrade another ps3 with the same e3 but it gets me an error 11000100, not the original ps3, is there anyway to reset the e3 or any other solution??
************* [ - Post Merged - ] *************

Originally Posted by xxdylanxx can i use my amazebreak to enter factory mode??? been reading from page 1 but still not clear for me.. i only have amazebreak dongle here sitting around... BTW i also bricked my slim but manage to get it working again, i bricked it after restoring.. im on 3.73OFW read bios,recover then brick.. soldered the needed wire for unbrick process and follow e3 tut for unbricking but no luck.. it just power for 3 secs then shutsdown what i did was put switch 1 up and all switch down fun flash mode power up ps3 no sd card at TF put downgrader.bin from e3 site and my backup bios to sd card, put SD in TF without powering off your ps3 flip the switch 6 up and everything else down and press start after flash i now see video "connect usb to controller and press ps button" now to factory mode..

go to the official amazebreak website and then to download section you will find everything about how to make your dongle a downgrade dongle...

[sahibunlimited]

Originally Posted by sanfree Thanks for your videos, I used your videos as reffrence for my downgrade, i have managed to downgrade 1 ps3, I'm now trying to downgrade another ps3 with the same e3 but it gets me an error 11000100, not the original ps3, is there anyway to reset the e3 or any other solution??

One e3 flasher works on 1 PS3

Sent from my X10i using Tapatalk

[sanfree]

Originally Posted by sahibunlimited One e3 flasher works on 1 PS3 Sent from my X10i using Tapatalk

But I heared it possible, I don't know how but I can't find the solution...