[bossdupad]

Hello,

There is my story .

I have a PS3 CECHP with NOR Samsung.

The PS3 have the 3.56 V1 with the HDD bug. I don't have the original HDD so I can't re install the firmware by the recovery menu and I can't start the PS3.

I bought the E3 flasher to flash my NOR for downgrade to 3.55 and upgrade to 4.0.

I have the dump of my 3.56 but I want to know if it's a correct dump.

The 3 MD5 are the same but I see that it can't be sure at 100%.

I tried to downgrade but I take the wrong downgrade file and I brick my PS3. I will use the solder point to try to unblock my PS3.

This is a link to download my 6 last dumps. Can someone could check it?

http://www.megaupload.com/?d=DMD5KIZQ

Thanks .

[zoids]

Originally Posted by bossdupad Hello, There is my story . I have a PS3 CECHP with NOR Samsung. The PS3 have the 3.56 V1 with the HDD bug. I don't have the original HDD so I can't re install the firmware by the recovery menu and I can't start the PS3. I bought the E3 flasher to flash my NOR for downgrade to 3.55 and upgrade to 4.0. I have the dump of my 3.56 but I want to know if it's a correct dump. The 3 MD5 are the same but I see that it can't be sure at 100%. I tried to downgrade but I take the wrong downgrade file and I brick my PS3. I will use the solder point to try to unblock my PS3. This is a link to download my 6 last dumps. Can someone could check it? http://www.megaupload.com/?d=DMD5KIZQ Thanks .

ohh your dump form 3.56 Curroup ?

i downgrade with FW 3.56 (v1 Bug Hdd can not goto XMB ) about 6-7 console with Slim and Fat another Hdd not original it Fine.

You Restore Ps3 with Flashfun Mode ok ?

[jhax78]

Originally Posted by bossdupad Hello, There is my story . I have a PS3 CECHP with NOR Samsung. The PS3 have the 3.56 V1 with the HDD bug. I don't have the original HDD so I can't re install the firmware by the recovery menu and I can't start the PS3. I bought the E3 flasher to flash my NOR for downgrade to 3.55 and upgrade to 4.0. I have the dump of my 3.56 but I want to know if it's a correct dump. The 3 MD5 are the same but I see that it can't be sure at 100%. I tried to downgrade but I take the wrong downgrade file and I brick my PS3. I will use the solder point to try to unblock my PS3. This is a link to download my 6 last dumps. Can someone could check it? http://www.megaupload.com/?d=DMD5KIZQ Thanks .

gonna check for you reporting back in a few minutes

be advised md5 or filesize doesn't say a thing if you have 2 corrupt dumps they can have the same md5 and size

[bossdupad]

Originally Posted by zoids ohh your dump form 3.56 Curroup ? i downgrade with FW 3.56 (v1 Bug Hdd can not goto XMB ) about 6-7 console with Slim and Fat another Hdd not original it Fine. You Restore Ps3 with Flashfun Mode ok ?

I don't even try to flash fun .

Originally Posted by jhax78 gonna check for you reporting back in a few minutes be advised md5 or filesize doesn't say a thing if you have 2 corrupt dumps they can have the same md5 and size

Thanks .

[jhax78]

bkpps30.bin and bkpps31.bin both good clean 100% dumps

keep them on a safe place if something goes wrong ur save

[bossdupad]

The one of the 5 or of the 6 folder?
************* [ - Post Merged - ] *************

Originally Posted by zoids ohh your dump form 3.56 Curroup ? i downgrade with FW 3.56 (v1 Bug Hdd can not goto XMB ) about 6-7 console with Slim and Fat another Hdd not original it Fine. You Restore Ps3 with Flashfun Mode ok ?

Can you say to me how to fix this problem from the 3.56?

[jhax78]

Originally Posted by bossdupad The one of the 5 or of the 6 folder? ************* [ - Post Merged - ] ************* Can you say to me how to fix this problem from the 3.56?

6 eme dump folder those where ok

check this out scroll down for e3

[zoids]

Originally Posted by bossdupad can you explain to me how do you downgrade the PS3 on 3.56?

you solder the SBE point of the E3 with the TRISTATE point on the Playstation 3 mainboard

Read more: http://www.ps3hax.net/showthread.php...#ixzz1gsROwpzW

and switch E3 Bord 100000 and put your original Dump from console and restore

take Sd card put downgrade.bin

when finish switch E3 Bord 000001 to start Downgrade funtion

when finish power off your ps3

install PSJB and downgrade hex

unplug power cable and plug then power+eject about 10 sec ps3 is power off.

install Flashdrive have PSUPDATE.pup (CFW ROGERO 3.55) about 3-5 min it finish ps3 is power off.

and put Lv2diag.self on about 10-30sec ps3 is power off

so power on PS3 Display Show FW setting Have fun CFW 3.555 Rogero .

[bossdupad]

Originally Posted by zoids you solder the SBE point of the E3 with the TRISTATE point on the Playstation 3 mainboard Read more: http://www.ps3hax.net/showthread.php...#ixzz1gsROwpzW and switch E3 Bord 100000 and put your original Dump from console and restore take Sd card put downgrade.bin when finish switch E3 Bord 000001 to start Downgrade funtion when finish power off your ps3 install PSJB and downgrade hex unplug power cable and plug then power+eject about 10 sec ps3 is power off. install Flashdrive have PSUPDATE.pup (CFW ROGERO 3.55) about 3-5 min it finish ps3 is power off. and put Lv2diag.self on about 10-30sec ps3 is power off so power on PS3 Display Show FW setting Have fun CFW 3.555 Rogero .

Ok thanks .

I just have 2 question,when you said " put your original Dump from console and restore ", I put my 3.56 dump right?

I have order a E3 reader card, it's the same like PSJailbreak?

[zoids]

Originally Posted by bossdupad Ok thanks . I just have 2 question,when you said " put your original Dump from console and restore ", I put my 3.56 dump right? I have order a E3 reader card, it's the same like PSJailbreak?

yes put your Bkkps3.bin in sd card on e3flasher.

E3 reader card it's PSJailbreak to.