[Stripes]

I Was Looking To Buy A 3.55 PS3, But I Find Them A Hastle To Find.

So... I Will Just Have To Downgrade Myself.

Should I Use E3? Or Progskeet? How're They Different? How Difficult Are They To Install? Once Installed, Can I Uninstall It Quickly For Online Play, Basically, Is It A Permanent Thing?

If Anyone Is Selling A 3.55 Firmware PS3 Then Please Post Below, Thanks!

~Merry Christmas!

[TizzyT]

I hear that progskeet is the way to go compared to e3 but they both seem to work. If you are not good with soldering tiny points then installing one will be considered extremely difficult unless you get the solder-less version. Hmm don't remember if it was a permanent thing but I figure it might be.
PS: Do not have or installed/used on before.....

[Stripes]

Thanks Tizzy, All Info Is Appreciated, Also, Where Would I Buy Progskeet Directly? (Just Wanna Make Sure I Do Not Run Into Any Scam Sites. )

I Assume This Is Legit: http://www.modchipsdirect.com/progsk...er-writer.html

[jhax78]

if you have a nand console then you can use the 360 nand clip

but whatever you do do not buy the ****ty nor 360 clip
they don't work have shorts and may cause harm to the ps3 and or progskeet

the progskeet team is busy with real working progskeet compatible clips
if i would be you i would just wait a bit until they're released

oh btw the skeet can be removed after the downgrade is done
unless you want to fast swap 3.55/ofw4.0

jhax

[Stripes]

Originally Posted by jhax78 if you have a nand console then you can use the 360 nand clip but whatever you do do not buy the ****ty nor 360 clip they don't work have shorts and may cause harm to the ps3 and or progskeet the progskeet team is busy with real working progskeet compatible clips if i would be you i would just wait a bit until they're released oh btw the skeet can be removed after the downgrade is done unless you want to fast swap 3.55/ofw4.0 jhax

How Can I Tell If It's Nand Or Not?

[jhax78]

Originally Posted by Stripes How Can I Tell If It's Nand Or Not?

if you know what model it is then you can see what flash it uses


CECHA / CECHG = nand
CECHH / CECHQ = nor
slim = nor

or checkout ps3devwiki

jhax

[OGzxFTW]

Originally Posted by jhax78 if you know what model it is then you can see what flash it uses CECHA / CECHG = nand CECHH / CECHQ = nor slim = nor or checkout ps3devwiki jhax

jhax, ill be getting my progskeet solderless soon but whats this about r7 & r8 etc?
do i need to make a switch like ive seen on youtube?
On devwiki http://www.ps3devwiki.com/index.php?title=Progskeet
im kinda confused about the hardware setup but i know what im do once i get to the part where i connect the progskeet together.