[Blaz0r]

Hi.

Could someone please clear my mind? Many people says that I must have REBUG version before using this and some of them says that this is only for reactivating YOUR OWN DLC which means that DLC's you don't own [shared/downloaded] cannot be played nor activated with this tool?

I tried this tool today with Kmeaw 3.55 with BO and I couldn't see any new Zombie maps from WAW.

[ZOMBIEKILLAH]

It works & you do not need to own the games or dlc . Search google reactpsn & Rap files .For black ops USA you need to patch your CFW that is supported with the vsh autopatcher .then get the correct rap files & DLC game id is important .I have activated Black ops + COD 5 maps with this & tons more can be activated .You need to do a search ,cause i cant tell you how & the whole process .I can only tell yes it works 100% .I did it on Rebug 355.2 update 4 but it can be done with Kmeaw also with the autopatcher . You need to delete any Black ops data before running the reactpsn on the aa account ! Then install the patch & dlc..

[ZOMBIEKILLAH]

@Blaz0r On some DLC it is required to have no game game data installed at all . Game save data is ok. So if you have a patch installed for COD 5 ,or if you trying to activate Black ops maps .You need to delete any game data first ! Then put the Rap files in your exdata folder then copy that folder to a USB stick.Then log into new -> user 1 or what ever you named it, when you created the new user account -> for using reactPsn 2.0.

Plug in the USB stick in second port from left .Only have the 3 Rap files inside exdata folder on USB stick. Log in to the new user account ->Rename new user account to aa then run ReactPsn & when it reboots .the name should change.Then log back into your first user account . You install the 107 patch for COD 5 & start by installing DLC 1 & if you see the maps show up continue installing the rest of DLC .

If doing Black ops do same rename account to aa make sure you have the 3 Rap files in exdata folder on USB stick plugged into port 2 .Log in to new account .Rename account to aa run reactPsn & wait to reboot .Then log in to your first user/account & install Patch 109 the DLC 1 load game to see if map 1 showed up in solo & if it did continue installing DLC 2 ,3...
************* [ - Post Merged - ] *************
I seen allot of people did not have as much luck like i did when getting COD5 maps working .But to get Black ops BLUS30591 working -> Is easy as pie So easy it is ridiculous..

[Blaz0r]

I've been trying this crap for almost 2 days and nothing works.

I'm on Kmeaw 3.55 CFW and I have never accessed PSN, but still some of the guys says that it doesn't matter and that this will work on Kmeaw.

I did every step correctly and when the aa profile re-names to reActPSN I can see that there is Xrif files but 0edat. Could that be the problem or something else?

Also on the official reActPSN tutorial doesn't it say that if I had never accessed PSN then I should use Rebug but I can go back to Kmeaw after that but this time with working PSN?

I don't want to use REBUG because Kmeaw is more stable and faster(?).

[ZOMBIEKILLAH]

Originally Posted by Blaz0r I've been trying this crap for almost 2 days and nothing works. I'm on Kmeaw 3.55 CFW and I have never accessed PSN, but still some of the guys says that it doesn't matter and that this will work on Kmeaw. I did every step correctly and when the aa profile re-names to reActPSN I can see that there is Xrif files but 0edat. Could that be the problem or something else? Also on the official reActPSN tutorial doesn't it say that if I had never accessed PSN then I should use Rebug but I can go back to Kmeaw after that but this time with working PSN? I don't want to use REBUG because Kmeaw is more stable and faster(?).

It should look like mine or similar reActPSN v2.0 9rif 1edat depending on how many raps converted to rif/edats you will get different name. If you use 3 raps your name should look like this -> reActPSN v2.0 3rif 0edat ..I am going to tell you what i did .I don't know if it helped in any way but i have a psn account & what i did was went to signing in to psn.

I basically creating my psn account on my new ps3 never been on psn ever ! After i got all the way up to the part they wanted me to install update i quit & because of this my PS3 was officially connected to PSN so my Xreg.sys file values changed ,now ->shows now like i was on psn -> in the file i have 000000001 instead of all 000000000. 00000001 means you were on PSN.

Also my PS3 was never on psn as in played any games or signed in completely.I just did what i said & it worked to change my registry without editing manually. Try Black ops to see if you have any success + never delete your reactpsn account ever .You will have issues using reactpsn. I don't know why you don't use rebug it is easy. If you use rebug 355.2 install selector 1.6 update 0.4 & go into CEX DEX & make sure you are on menu 1 + normal mode .

It should be set to that by default . Then use reactpsn vsh autopatcher .Then run the reactpsn & do not bother going into the CEX/DEX menu or debug settings . I still have 0.4 installed & i have not yet seen any Red screen at all .I will not update to rebug 0.6 cause it is confirmed there seems to be issues with reactPsn with update 0.6 so 0.4 is best but risk of Red screen if you do anything different than what i said !

By the way make sure you have the working Rap files & not ones that are not confirmed .were ever you have got them ,look at the comments to see if they had got them working ..also make sure you did actually patch your vsh cause it may had said it did but multiman for some does not really copy over like my friend had this issue .

I used FTP from PC enabled multiman write to dev_flash /dev_bind + multiMAN FTP to get IP address. Then i accessed PS3 with Flash fxp FTP while multiman was running dragged the vsh files from FTP window to my PC first to make a backup copy. Then i dragged/copied over the vsh that needed to patch my CFW .When done i disconnected FTP ,disabled multiman after writing successfully to dev_flash & rebooted .You problem may be in the vsh try & copy a different way like i did .If your using Kmeaw use vsh autopatcher it will tell you if it is patched already ! When you run autopatch it will detect kmeaw & say it is patched if you did it & if it did not patch it when you did it ,autopatch will patch it correctly !

I am sorry i had wrote a book here but allot needs to be understood when having issues .
************* [ - Post Merged - ] *************
One thing extra i did was go into the reactpsn user account & copied the act.dat1 to my exdata folder in to my main user exdata folder .I also took the edat1 from the map pack install in BLUS30591/USERDIR copied it to the exdata folder ran reactpsn. Then i seen 1edat in my reactpsn name. So i decided to copy it back over to BLUS30591/USERDIR after this messing around it worked don't ask me if this is why..? but it worked after this ..

[Blaz0r]

Yes, BUT as I said I have NEVER accessed PSN which means that I don't even HAVE PSN ACCOUNT like you do. When I bought PS3 the first thing I did was Kmeaw CFW and nothing else.

Here is the quote from the official reActPSN tutorial:

Working on CFW3.41&CFW3.55, 256M NAND ROM model no tested!
Maybe not work on:
256M NAND FlashRom consoles(no tested),
OtherOS++(this cfw seems does not support PSN game activation),
Virgin PSN console with cfw3.55K

>>> (Never login PSN before, error 80010601. please upgrade it to rebug3.55) <<<

The tutorial is not in English so it's a little bit confusing.
I guess I have to try Rebug if I want to play "downloaded" PSN.

[ZOMBIEKILLAH]

Originally Posted by Blaz0r Yes, BUT as I said I have NEVER accessed PSN which means that I don't even HAVE PSN ACCOUNT like you do. When I bought PS3 the first thing I did was Kmeaw CFW and nothing else. Here is the quote from the official reActPSN tutorial: Working on CFW3.41&CFW3.55, 256M NAND ROM model no tested! Maybe not work on: 256M NAND FlashRom consoles(no tested), OtherOS++(this cfw seems does not support PSN game activation), Virgin PSN console with cfw3.55K >>> (Never login PSN before, error 80010601. please upgrade it to rebug3.55) <<< The tutorial is not in English so it's a little bit confusing. I guess I have to try Rebug if I want to play "downloaded" PSN.

If you really want the PSN stuff to work i would switch to Rebug ,i did & i love it .I thought about Rebug forever ,but never tried it. Now that i have switched from MFW, i will not go back to any other CFW. If you are thinking about all the extra settings in Rebug ,you don't even have to use any of them & game compatibility is great as any other CFW like kmeaw. I have yet to run into any games not working & i have well over 280+ games. Everything works great .

You don't need to have a account just start the process & create one enter fake info & use a proxy just to complete everything until you get to the update then cancel it !

Then it will change your xreg.sys file to 000001 or you can do it manually if you look at the ascension DLC or W@W Classic DLC hack on Itskamel tutorial from Codhax.net . In the tut he shows what you need to edit you're xReg.sys file to get your PS3 to think it was on PSN .. There are tuts about this everywhere..

I would just activate it on Rebug then if you wanna go back to kmeaw .Flash back to OFW then flash kmeaw then patch the vsh & the activation will stick ..

[Blaz0r]

Originally Posted by ZOMBIEKILLAH If you really want the PSN stuff to work i would switch to Rebug ,i did & i love it .I thought about Rebug forever ,but never tried it. Now that i have switched from MFW, i will not go back to any other CFW. If you are thinking about all the extra settings in Rebug ,you don't even have to use any of them & game compatibility is great as any other CFW like kmeaw. I have yet to run into any games not working & i have well over 280+ games. Everything works great . You don't need to have a account just start the process & create one enter fake info & use a proxy just to complete everything until you get to the update then cancel it ! Then it will change your xreg.sys file to 000001 or you can do it manually if you look at the ascension DLC or W@W Classic DLC hack on Itskamel tutorial from Codhax.net . In the tut he shows what you need to edit you're xReg.sys file to get your PS3 to think it was on PSN .. There are tuts about this everywhere.. I would just activate it on Rebug then if you wanna go back to kmeaw .Flash back to OFW then flash kmeaw then patch the vsh & the activation will stick ..

Yea I installed Rebug 3.55.2 /0.6 and everything works fine. Thanks for your help! :D