|
|
12-25-2011
|
#1 |
|
Apprentice
Join Date: Jan 2011
Posts: 6
Likes: 5
Liked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
need help!! (full brick) error update 8002f157, not able install any firmware
hi all,
After an update, it doesn't boot back to xbm. It stucks! Every time I turn on ps3, it ask me to put a firmware 3.56 or above on an usb-drive and then press" start + select". So I downloaded the latest firmware (v4.00) then put it into usb-stick (root/PS3/UPDATE/). it starts to read the firmware from the usb-drive, after it done with reading, it begin search the firmware. after that, it saids press the "PS" button to continue. So I press it. unfortunately it stops and saids " The data are currupt. (8002f157)" in dutch. I've also tried different firmware, it gives same result. Things I already tried: Formatted the HDD with an usb converter All six options on recovery mode Different usb-memory different usb-port Is there are something else, I should try? I hope you guys can help me out. after some research on internet, there is not solution for this issue(full brick). the way might be able fix this is, using a progs keet or E3 flasher. but all this flashers are require fw 3.7 or 4.0 installed. But that is impossible to me. I hope there is still a way to do it. BTW it's a 250 GB slim and warranty has already expired. |
|
|
|
12-25-2011
|
#2 |
|
Member
 
Join Date: Sep 2011
Posts: 880
Likes: 152
Liked 277 Times in 189 Posts
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
|
I don't see why a flasher wouldn't work with 3.56 installed.
If the normal downgrade method does not work, get a NOR dump from a 3.55 console, write the per-console data from your console dump to that dump, flash NOR. Should work just fine.
__________________
PS3 Slim CECH-3004A 160GB (500GB)
PS2 Slim SCPH-70004 - FMCB 1.8b |
|
|
|
|
12-25-2011
|
#3 |
|
Member
 Join Date: Nov 2011
Posts: 102
Likes: 2
Liked 5 Times in 5 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Pereb27 you say if take a backup cfw 3.55 from E3 flasher and flash another PS3 run good? mh....
|
|
|
|
|
12-25-2011
|
#4 |
|
Apprentice
Join Date: Jan 2011
Posts: 6
Likes: 5
Liked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I think downgrade will do the trick. I just wondering if I can able recover the firmware and this ps3 works again. Can I remove this NAND/NOR flasher? So I can reuse again?
I think I go to pick up a progskeet. since the price of E3 flasher more expensiver than progskeet. any idea where to buy it? thx |
|
|
|
|
12-25-2011
|
#5 |
|
Member
Join Date: Nov 2011
Posts: 102
Likes: 2
Liked 5 Times in 5 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
|
|
|
|
|
Likes: (1) |
|
12-25-2011
|
#6 | |
|
Apprentice
Join Date: Jan 2011
Posts: 6
Likes: 5
Liked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I dont have a backup of the bios. So I can backup the bios with E3, I guess? |
|
|
|
|
|
12-25-2011
|
#7 | |
|
Member
Join Date: Nov 2011
Posts: 102
Likes: 2
Liked 5 Times in 5 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
|
|
|
|
|
|
12-25-2011
|
#8 | |
|
Member
 Join Date: Oct 2010
Posts: 50
Likes: 12
Liked 13 Times in 9 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
If you do the downgrade and the PS3 still won't turn on (when you press power the red light turns green and then turns off, leaving you with just a black screen) you need to install dospiedra's V2 downgrade patches on top of the 3.55 dump with your per-console data. That was how my experience with un-bricking went anyways. Edit: I eventually got rid of dospiedra's V2 patches by doing a QA downgrade. The only side-effect left is that I need SS patches to prevent the "You are not authorised to play blu-rays" message (I don't think this side-effect can be easily fixed until there is more public knowledge on decrypting and modifying per console data)
__________________
If my post helped you, then help me by liking my post ;)
Last edited by juice777; 12-25-2011 at 06:19 PM. |
|
|
|
|
|
12-27-2011
|
#9 |
|
Apprentice
Join Date: Jan 2011
Posts: 6
Likes: 5
Liked 2 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I just order a progskeet. My goal is, unbrick this ps3 than desolder all wire from ps3, so I can reuse this progskeet again on other console.
Before I getting start, I do have few noob questions: 1. How do I know which motherboard is on ps3, are there all "slim "version the same? 2.What if this NOR or Bios are already corrupted, is there still a chance to recover it? 3.How long should I use for the wire between the ps3 motherboard and the progskeet? (about 20cm?) 4. I need put the ps3 back together, so I could test it, right? will that problem hide all this wires? 5. Is there something, I must know before I begin? Can you please link me to right tutorial? from step by step unbrick this ps3. Downgrade the firmware is not importen to me. thx |
|
|
|
|
12-28-2011
|
#10 |
|
Senior Member
 Join Date: Dec 2010
Posts: 2,323
Likes: 1,137
Liked 645 Times in 529 Posts
Mentioned: 270 Post(s)
Tagged: 0 Thread(s)
|
i think i have full brick, is it possible to fix with another dump from another PS3?
the thing is i recovered a bad bios dump, it booted fine after! the weird thing is when i woke up to proceed it wont turn on, getting: 3 beeps, from green to 1 time blinking orange then blinking red light is this unbrickable? |
|
|
 |
| Bookmarks |
| Thread Tools | |
|
|
