[drca]

hi im new here and have some problems, i do e3 tutorial and have some problems .
When have to cut the power and turn on to see if the ps3 was downgrade using e3downgrade.bin, my console shutdow after 1 second, i cant do nothing after this, i try ro put the original backup of the first backup but the console dont still on,
what can i do???

[Pro.Hack]

Originally Posted by drca hi im new here and have some problems, i do e3 tutorial and have some problems . When have to cut the power and turn on to see if the ps3 was downgrade using e3downgrade.bin, my console shutdow after 1 second, i cant do nothing after this, i try ro put the original backup of the first backup but the console dont still on, what can i do???

Must do the E3 unbrick solution on E3 team website under download tab.
Follow there instructions.
If need help finding location of the solder points on your motherboard google your ps3 motherboard type for location.

Once you installed the wire correctly and follow instruction accordingly then you can flash your dump successfully.

[qwertyparam]

Originally Posted by dszuecs May i ask about the modifications you did on your dump?

did u get ur ps3 to work again,?
I'm having the same problem as yours.

[Pro.Hack]

Originally Posted by qwertyparam did u get ur ps3 to work again,? I'm having the same problem as yours.

If anyone really wants to know what I did to that dump, I edited the script in order to not do a console id check. Isn't much and easy to do but tricks the ps3. Able to then do a soft reset and erase log files and install a correct fresh dump of your console following with downgrade.bin

[qwertyparam]

Originally Posted by Pro.Hack If anyone really wants to know what I did to that dump, I edited the script in order to not do a console id check. Isn't much and easy to do but tricks the ps3. Able to then do a soft reset and erase log files and install a correct fresh dump of your console following with downgrade.bin

i have no disbelief in ur bios its that i was asking dszuecs if he fixed his ps3 because we both have same problem...
btw nothin seems to work with my ps3 tried everything , but no good i cant see the screen wich says cnonect controller and therefore i cant enter FSM.
but pro.hack can this be due to a corrupt hdd?

[qwertyparam]

Originally Posted by Christopher4278 I tried that method but I keep getting error 10001111, Failed to write PS3 BIOS...it gets up to like 2 of the 8 bars and then i get that error code...any suggestions?

u surely have your nor clip not attached properly, take the foam that came with u e3 flasher nor clip , cut 3-4 pieces of it of exact size as nor chip and paste them on the norclip with duct tape or currency band so that its tight enough.then retry ...u will succeed.

[Pro.Hack]

Originally Posted by qwertyparam i have no disbelief in ur bios its that i was asking dszuecs if he fixed his ps3 because we both have same problem... btw nothin seems to work with my ps3 tried everything , but no good i cant see the screen wich says cnonect controller and therefore i cant enter FSM. but pro.hack can this be due to a corrupt hdd?

Yes I would always format the HDD every time you install a new FW with previous issues. Even if it says connect controller on screen. e3 still can flash Nor.

[drca]

Originally Posted by Pro.Hack Must do the E3 unbrick solution on E3 team website under download tab. Follow there instructions. If need help finding location of the solder points on your motherboard google your ps3 motherboard type for location. Once you installed the wire correctly and follow instruction accordingly then you can flash your dump successfully.

after this , i will flash with original backup and start the downgrade again ok ??? after solder and flash can i remove the wire ????

[Pro.Hack]

Originally Posted by drca after this , i will flash with original backup and start the downgrade again ok ??? after solder and flash can i remove the wire ????

Yes that is fine, and no you can leave the wire even after unbrick.

[drca]

Originally Posted by Pro.Hack Yes that is fine, and no you can leave the wire even after unbrick.

i think the E3 team do the E3_Donwgrade corrupt to brick our console to force we use the E3flash with wire in console, i will flash with other files that without E3 Team Site, anyone can send to me a link with all files to make a safe downgrade ???
can i remove the E3 flasher with wire and flash another ps3 ???? and after this is just put again in my console and solder again to work ok ??