[TUT] E3 Flasher Downgrade on different PS3 - Page 19 - PS3Hax Network

alex-07 · 01-17-2012

Originally Posted by gfour

the ps3 is working again, but if i install the e3 again, then the ps3 can start but the tv got no video signal, and the hdd led dont flash, ans usb dont work too, but i can still make a dump of my nor and make the e3 downgrade process. but how to downgrade with a dongle if the ps3 dont recognize usb?

clean your contacts inside the NOR-Clip carrefully and on the NOR (shure, is bad contacts NOR side, coating layer on it?)

gfour · 01-17-2012

[QUOTE=alex-07;317806]clean your contacts inside the NOR-Clip carrefully and on the NOR (shure, is bad contacts NOR side, coating layer on it?)[/QUO

i did this too, didnt worked, and i dont think this is a problem, because i can, dump, flash and downgrade my ps3 with the e3

alex-07 · 01-17-2012

has you seen this one, maybe its a other mainbord then yours, he use 3x wires (VCC)

hpourano · 01-18-2012

Dear People
I have a PS3 slim with Firmware 3.72. Can I use E3 Flasher to downgrade it? I'm asking because I have heard that if the PS3 came with this firmware it cannot go lower than that!
Is it true? Can I try it or I will Brick it?

Thanks in advance for your help

alex-07 · 01-18-2012

@hpourano

here download this file and read it, how to use
(ps3wiki: Downgrading_Firmware_Lowest_Applicable_Firmware)

if you get(Lowest_Applicable_Firmware) =< OFW 3.55 then you can go to this TUT

hpourano · 01-18-2012

Originally Posted by alex-07

@hpourano

here download this file and read it, how to use
(ps3wiki: Downgrading_Firmware_Lowest_Applicable_Firmware)

if you get(Lowest_Applicable_Firmware) =< OFW 3.55 then you can go to this TUT

Thanks Alex-07, One of the most helpful replies I have ever received!!!! Keep up the good work my friend

mosulica · 01-20-2012

this tutorial works very fine for multiple ps3`s, just use the samsung firmware for the e3flasher

Pajdas · 01-26-2012

Hey gays
I did all like TDCroPower2 tutorial describe it.
I'm intresting how to remove E3 flasher from PS3.
I have to disassemble it and unsolder the tristate point, take off e3 clip and assemble it back.
Is that good procedure?
Sorry for my bad english

TDCroPower2 · 01-26-2012

yes its all correct!

turnip101 · 01-26-2012

Downgraded from 4.00 to 3.55 with an E3 Flasher and E3 Card Reader with this tutorial. Everything went fine, but after installing BDEMU, & Multiman from e3-tech.com I'm getting this error in Multiman:

"multiMAN cannot enabled BD-ROM emulator. Functionality may be restricted! Error: Unsupported system firmware or BDEMU.BIN"

I also tried updating the CFW with the "Downgrade files Rogero’s CFW 3.55 V2 include 4.00 Spoofer (19.01.2012)" link in the first post after installing E3's CFW, but it gives me a "corrupted data" error.

01-17-2012	#182
gfour Member Join Date: Aug 2008 Location: Germany, NRW Posts: 228 Likes: 37 Liked 11 Times in 8 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	[QUOTE=alex-07;317806]clean your contacts inside the NOR-Clip carrefully and on the NOR (shure, is bad contacts NOR side, coating layer on it?)[/QUO i did this too, didnt worked, and i dont think this is a problem, because i can, dump, flash and downgrade my ps3 with the e3 __________________

01-18-2012	#185
alex-07 Member Join Date: Jan 2012 Posts: 58 Likes: 20 Liked 23 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	@hpourano here download this file and read it, how to use (ps3wiki: Downgrading_Firmware_Lowest_Applicable_Firmware) if you get(Lowest_Applicable_Firmware) =< OFW 3.55 then you can go to this TUT Last edited by alex-07; 01-18-2012 at 07:02 AM.

01-26-2012	#189
TDCroPower2 Member Join Date: Nov 2011 Location: Croatia Posts: 122 Likes: 2 Liked 41 Times in 16 Posts Mentioned: 37 Post(s) Tagged: 0 Thread(s)	yes its all correct! __________________ I DON'T ANSWER ON PM... QUESTIONS GOES IN THE THREAD

		PS3Hax Network - Playstation 3 Hacks and Mods > PS3Hax > PS3 \| Downgrading and Flashing
[TUT] E3 Flasher Downgrade on different PS3

01-17-2012	#183
alex-07 Member Join Date: Jan 2012 Posts: 58 Likes: 20 Liked 23 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	has you seen this one, maybe its a other mainbord then yours, he use 3x wires (VCC)

01-18-2012	#184
hpourano Apprentice Join Date: Jan 2011 Posts: 4 Likes: 0 Liked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Dear People I have a PS3 slim with Firmware 3.72. Can I use E3 Flasher to downgrade it? I'm asking because I have heard that if the PS3 came with this firmware it cannot go lower than that! Is it true? Can I try it or I will Brick it? Thanks in advance for your help

01-20-2012	#187
mosulica Apprentice Join Date: Jan 2012 Posts: 2 Likes: 1 Liked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	this tutorial works very fine for multiple ps3`s, just use the samsung firmware for the e3flasher

01-26-2012	#188
Pajdas Apprentice Join Date: Dec 2011 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey gays I did all like TDCroPower2 tutorial describe it. I'm intresting how to remove E3 flasher from PS3. I have to disassemble it and unsolder the tristate point, take off e3 clip and assemble it back. Is that good procedure? Sorry for my bad english

01-26-2012	#190
turnip101 Apprentice Join Date: Jan 2012 Posts: 1 Likes: 2 Liked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Downgraded from 4.00 to 3.55 with an E3 Flasher and E3 Card Reader with this tutorial. Everything went fine, but after installing BDEMU, & Multiman from e3-tech.com I'm getting this error in Multiman: "multiMAN cannot enabled BD-ROM emulator. Functionality may be restricted! Error: Unsupported system firmware or BDEMU.BIN" I also tried updating the CFW with the "Downgrade files Rogero’s CFW 3.55 V2 include 4.00 Spoofer (19.01.2012)" link in the first post after installing E3's CFW, but it gives me a "corrupted data" error.

User Name		Remember Me?
Password