[TDCroPower2]

@k00lie

what a 3rd wire? I only solder the SBE -> TRISTATE for the FLASH FUN and the SBCE -> A for the Fast Dual Boot

all works fine

by the way my tut is finished and i install the dual boot without the 2012 update.bin, all works with the 2011.10.28 update.bin!

raxxus and i work on my tut to translate it to english... we post it complete here the days!


thank you for the board mapping very nice work

[Skyline-leo]

What is a CUT A and B???

i don't understand this step :\

[TDCroPower2]

the wire on the mainboard between the point A and the point B!

[kman82]

Originally Posted by Skyline-leo What is a CUT A and B??? i don't understand this step :\

its actually one of the circuts between A and B its a power line (needs to be pysically removed from the board so contact between these to points can not happen.

[Skyline-leo]

Originally Posted by kman82 its actually one of the circuts between A and B its a power line (needs to be pysically removed from the board so contact between these to points can not happen.

HoooH thanks very much, my english is poor

Ok for ps3 80gb checl4 is ok? or is only for jap motherboard?

[TDCroPower2]

we have actually only find the A and B points on the SLIM! The FAT actually don't support the Fast Dual Boot

[VanBuren]

Originally Posted by TDCroPower2 [B][COLOR="DarkRed"] what a 3rd wire? I only solder the SBE -> TRISTATE for the FLASH FUN and the SBCE -> A for the Fast Dual Boot

Hello. Isn't it enough to solder just one wire SBCE -> A for the Fast Dual Boot? If console is slim.

[TDCroPower2]

no, you must cut the wire between the points A and B!!!

[VanBuren]

Originally Posted by TDCroPower2 no, you must cut the wire between the points A and B!!!

Yes, I know it. But I ask if i need to solder TRISTATE for the FLASH FUN and the SBCE?? Or just a hedge, that should not dismount again, if the console to brick?

[alex-07]

Originally Posted by VanBuren Yes, I know it. But I ask if i need to solder TRISTATE for the FLASH FUN and the SBCE?? Or just a hedge, that should not dismount again, if the console to brick?

TRISTATE (SBE)soldering needed in case of Bricks/FLASH FUN mode (so better do it if the E3-Flasher remains in our PS3)

A-Point (SBCE) soldering an cutting the conducting path A<=>B needed for Fast Dual Boot