[ipodaldjflouad00]

Got any tuts for half dual boot ??
Thing i am going to try to have switch 2 on cfw and then downgrade. Backup the 3.55. Reflash the 3.55 bios again.

[tantu]

hiiii every one iam now flashed my ps3 and stopped in the step that the screen told my to press ps bottom and in tutt i must insert ps3 dongle >>> ok >>> after inserting this dongl nothing happen ((press start and ejict on ps3 )) and wait untl ps3 restart

is my dongle not working or i did somthnig wrong in steps or my ps3 now bricked(( i just flashed my ps3 with downgrade.bin not both downgrade.bin and bakpps3 that i backedup wheni put it in microsd )) is this is aproblem and my ps3 brick


pleas help meeeeeeeeeeeeeeeeeeeee

[tantu]

any one tell my what happen if i connect my six-axis to ps3 and navigate throw selection cues dongle not working or
how to enter fsm without downgrade dongle
now i am stuk in sreen that tilling me to connect sixaxis and press ps btm
pleas help meeeeeee

[leovaras]

Originally Posted by tantu any one tell my what happen if i connect my six-axis to ps3 and navigate throw selection cues dongle not working or how to enter fsm without downgrade dongle now i am stuk in sreen that tilling me to connect sixaxis and press ps btm pleas help meeeeeee

what kind of dongle are you using, and what is your PS3 model?

[tantu]

Originally Posted by leovaras what kind of dongle are you using, and what is your PS3 model?

i used ps jailbreak2 cechh12 40g fat now stucking in connect controller and pres ps btn

ok can anyone tell me what happen if i flashed my ps3 with e3 just with file((downgrade.bin)) not 2 file downgrade.bin &pps3.

because i did that and thought that thing brick my ps3 i dont now but there is a thing when i power up my ps3 it open screen ((connect usb controller and press ps btn))

i think my ps3 is now bricked ??????? pls any one answer meeeeee

[leovaras]

Originally Posted by tantu i used ps jailbreak2 cechh12 40g fat now stucking in connect controller and pres ps btn ok can anyone tell me what happen if i flashed my ps3 with e3 just with file((downgrade.bin)) not 2 file downgrade.bin &pps3. because i did that and thought that thing brick my ps3 i dont now but there is a thing when i power up my ps3 it open screen ((connect usb controller and press ps btn)) i think my ps3 is now bricked ??????? pls any one answer meeeeee

get the files from here: http://www.e3-tech.net/download.html

See if that helps in any way

[tantu]

ok friend after i changed the dongle i enterd fsm ok
and put the .self and pups that in the step one folder after that my ps give me logfile that

settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
UpMng.UpdatePackage() failure
manufacturing updating FAILURE(0x8002f048)
Total Elapsed time = 9256 msec

after ps dont work then i put .self file from step 2 and now
my screen tilling me ((connect usb controller and then press ps button ))

what should i did wrong in my steps
((when i flashed ps3 i flashed it just with downgrad.bin1 file inmsd ))
was my ps bricked or try another pups or format my hdd or what ?????

[troy1]

Good evening everyone. I made a damp on my PS3 slim cech 2504A FW 4.00 and I tried to downgrade but without success. My PS3 in "normal mode" to work normally, but no video, no HDD, no USB function. I tried to flash with the original PS3 and damp with the PAO SBE TRISA and get to work as normal, but no video, no HDD, no USB function.

I checked 10 times damp ....
http://www.ps3devwiki.com/wiki/Flash
http://www.ps3devwiki.com/wiki/Validating_flash_dumps

I tried the unbrick this tutrial
http://www.appleumbrella.com/2012/01...w-to-tutorial/
Symptoms are the same. PS3 to work, but no video, no HDD, no USB function

I tried to reverse byte the original damp and flashing console . PS3 to work, but no video, no HDD, no USB function

My original DAMP :
http://www.mediafire.com/?rymc2ejxacuyd3e

If someone will take a look to damp gave the okay. Please advice what should I do?

Sorry for my bad english I am from Croatian

[leovaras]

Originally Posted by tantu ok friend after i changed the dongle i enterd fsm ok and put the .self and pups that in the step one folder after that my ps give me logfile that settle polling interval success vflash is enabled... creating system regions... create storage region: (region id = 1) create storage region: (region id = 2) format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS) create storage region: (region id = 3) format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT) creating system regions done. boot from nor flash... creating nor flash regions... create storage region: (region id = 2) create storage region: (region id = 3) creating flash regions... create storage region: (region id = 1) create storage region: (region id = 2) format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT) create storage region: (region id = 3) format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT) create storage region: (region id = 4) format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT) create storage region: (region id = 5) create storage region: (region id = 6) Initializing taking a while... start Updating Proccess UpMng.UpdatePackage() failure manufacturing updating FAILURE(0x8002f048) Total Elapsed time = 9256 msec after ps dont work then i put .self file from step 2 and now my screen tilling me ((connect usb controller and then press ps button )) what should i did wrong in my steps ((when i flashed ps3 i flashed it just with downgrad.bin1 file inmsd )) was my ps bricked or try another pups or format my hdd or what ?????

I have to ask, are you using a new E3 flasher, or a used one? because if it is a used one, you're NOT supposed to use the downgrade.bin file, instead, you used one of your OWN bios dump to flash in FLASH FUN mode. You just have to verify that the dump from your NOR is not corrupted or empty. That's probably why this is not working for you. Maybe would be a good idea to read the tutorial carefully, so you don't skip anything

[tantu]

ok leovaras thanks for you friend

i uesd an e3 flasher that used in another ps3 downgrading
now i soleved the problem of ((failure manufactur)) when i tried toinstall cfw i but it with wrong name and now my ps3 working fine in rogero cfw



when i flashed my ps3 i flashed it with 1 file ((downgrade.pin))
and entered fsm with my ti titanium 89 calc. as dongle because i didn't fined any working dongle here

thanks for all
and any one need any thing from me im in service mode hhhhh