[oceansoul]

I order progskeet and get tham ! I downgrade fine with e3 my first ps3 and works fine i also wont try second but with progskeet !
I dump nor and when i use nor checker everythings fine when i follow order and patch 3.70 with winskeet and progskeet patcher everythings went fine than i use flowbuilder and Select “Byte reverse and extract a NOR Dump” and drag downgrade.bin [using e3downgrade.bin] [becouse from our site was not work becouse megaupload is down ] to the bottom option and click “Execute Operation”. !

I get error like is says on post that is normal size of new file is not “downgrade.bin.REV" its downgrade.swap ! i rename to downgrade.bin and when i check tham with nor dump checker i get that file is not good that i check HW ! ...

Second question is how to chek dumped bios with flowbuilder if someone can post me some little guide for that ?

Thanks a lot

[Scotch_be1]

Originally Posted by oceansoul I order progskeet and get tham ! I downgrade fine with e3 my first ps3 and works fine i also wont try second but with progskeet ! I dump nor and when i use nor checker everythings fine when i follow order and patch 3.70 with winskeet and progskeet patcher everythings went fine than i use flowbuilder and Select “Byte reverse and extract a NOR Dump” and drag downgrade.bin [using e3downgrade.bin] [becouse from our site was not work becouse megaupload is down ] to the bottom option and click “Execute Operation”. ! I get error like is says on post that is normal size of new file is not “downgrade.bin.REV" its downgrade.swap ! i rename to downgrade.bin and when i check tham with nor dump checker i get that file is not good that i check HW ! ... Second question is how to chek dumped bios with flowbuilder if someone can post me some little guide for that ? Thanks a lot

you did a good check but it's your bios backup, it's 100% corrupt, i would suggest to make a new backup.

Always happy to help!

[domelec]

Originally Posted by oceansoul I order progskeet and get tham ! I downgrade fine with e3 my first ps3 and works fine i also wont try second but with progskeet ! I dump nor and when i use nor checker everythings fine when i follow order and patch 3.70 with winskeet and progskeet patcher everythings went fine than i use flowbuilder and Select “Byte reverse and extract a NOR Dump” and drag downgrade.bin [using e3downgrade.bin] [becouse from our site was not work becouse megaupload is down ] to the bottom option and click “Execute Operation”. ! I get error like is says on post that is normal size of new file is not “downgrade.bin.REV" its downgrade.swap ! i rename to downgrade.bin and when i check tham with nor dump checker i get that file is not good that i check HW ! ... Second question is how to chek dumped bios with flowbuilder if someone can post me some little guide for that ? Thanks a lot

first mistake is using nor checker from e3 its ****e
second mistake is bytereversing a progskeet dump (progskeet reverses the dump as its read), and third mistake is using e3_downgrade.bin on a progskeet dump.

dump nor with progskeet
valitate the dump with wiki
patch the dump in winskeet or flowrebuilder with downgrade patches from wiki
flash back the patched dump with progskeet
continue with downgrade

[oceansoul]

Originally Posted by Scotch_be1 you did a good check but it's your bios backup, it's 100% corrupt, i would suggest to make a new backup. Always happy to help!

Its not corruped i back tham to ps3 turn on ps3 and works ! Than dump s good i get error when i made auto hex ! And done job as i write !

For second post please give me working links on wiki ... I have all things and i cant find Downgrade.bin as link on ps3hax is dead and i follow that procedure !

I didnt flash ps3 with patched bios becouse i think that is something wrong like you posted ii just ask if someone have right file downgrade.bin and that wiki links i didnt find there also working downgrasde.bin files !

I follow this post http://www.ps3hax.net/2011/08/noob-t...-55-kmeaw-cfw/

Also can you tell me how to check dumped bios with flowbuilder ?

[domelec]

reread wiki
the patches are there
also an autopatcher to use with winskeet
u dont use any downgrade.bin
if console is working dump with progskeet
patch the dump with winskeet and autopatch files
reflash with winskeet


if the dump u have from e3flasher is good like u say it is then in flowrebuilder bytereverse it
then patch it in winskeet
then reflash the patched file back to ps3
exactly like that nothing else

[oceansoul]

Understand but please give me link for that guide in wiki and what patch for dumped file to use ?
I found this one only :
http://www.ps3hax.net/2011/09/releas...-v2-patchfile/
************* [ - Post Merged - ] *************
Understand but please give me link for that guide in wiki and what patch for dumped file to use ?
I found this one only :
http://www.ps3hax.net/2011/09/releas...-v2-patchfile/

Also file is not dump with e3 flasher ... its dump with progskeet !

Dont understand doesnt need to use autohex file anymore ?

01.Just need to bytereverse dumped file
02.To use this file "ProgSkeet Patcher’s PS3 NOR Downgrade v2 patchfile" and patch bytereversed file with this in winskeet ?
And than is same procedure ps3 in factory mode and self and pup file in root usb and wait few minutes and ps3 will shut down automaticly than only second self file in root file and for few sec ps3 will be turned off automaticy ... Than turn on ps3 and should be kmeaw 3.55 as i understand ?

[domelec]

the mention of bytereverse is for e3flasher

if u have dumped with winskeet then all u need to do is:

1 patch with winskeet the downloaded patches u have (link above)
2 reflash the patched file back to ps3
3 do the rest of the downgrade (fsm etc)

[oceansoul]

That is it !
I dump with winskeet done like you says and now i have downgraded second ps3 with kmeaw 3.55 ...
thanks a lot !

[domelec]

nice to see u have it sorted
glad to have helped