[osui818]

I use e3 flasher limited, After i finish back up the bios,I put e3_downgrade.bin file on the sd card. Insert sd back into flasher, i turn it on. and then it auto shut off. now i cant even turn the ps3 back on, it shut off when i turn on.

PS3 v3.7
i have bkpps30, bkpps31, but the bkpps32 is 0kb

its there anyway i can fix this?

[nzie]

Originally Posted by osui818 I use e3 flasher limited, After i finish back up the bios,I put e3_downgrade.bin file on the sd card. Insert sd back into flasher, i turn it on. and then it auto shut off. now i cant even turn the ps3 back on, it shut off when i turn on. PS3 v3.7 i have bkpps30, bkpps31, but the bkpps32 is 0kb its there anyway i can fix this?

how is your backup?good or bad?

[osui818]

bkpps30 16,777,216 bytes
bkpps31 16,777,216 bytes
bkpps32 0bytes

the system cant even turn on

[nzie]

Originally Posted by osui818 bkpps30 16,777,216 bytes bkpps31 16,777,216 bytes bkpps32 0bytes the system cant even turn on

which backup did you use with e3_downgrade?bkpps32?

[osui818]

Originally Posted by nzie which backup did you use with e3_downgrade?bkpps32?

i think bkpps30, and i changed the name to bkpps3

"the think is the ps3 cant turn on, it auto shut off when i turn on"

[nzie]

Originally Posted by osui818 i think bkpps30, and i changed the name to bkpps3 "the think is the ps3 cant turn on, it auto shut off when i turn on"

you must verify the backup

[playerkp420]

After you verify that one of the backups you have are good. You need to solder a wire from the sbe point on the flasher ribbon to the pao tristate point on the ps3 motherboard.

Then flash your good bios backup back to your nor.

Or try this guide.

[osui818]

Originally Posted by playerkp420 After you verify that one of the backups you have are good. You need to solder a wire from the sbe point on the flasher ribbon to the pao tristate point on the ps3 motherboard. Then flash your good bios backup back to your nor. Or try this guide.

But I have 3 bios tho 2 of them are 16,777,216 and 1 is 0, but I remember I used the bkpps30 and changed the name to bkpps3 to flash.

So you saying i just have to use that bios and solder a wired and my ps3 will come back up?

[playerkp420]

Originally Posted by osui818 But I have 3 bios tho 2 of them are 16,777,216 and 1 is 0, but I remember I used the bkpps30 and changed the name to bkpps3 to flash. So you saying i just have to use that bios and solder a wired and my ps3 will come back up?

You need to solder the wire, so your ps3 will stay on. Then u can flash your good BIOS back to your ps3.

But make sure that it is definitely a good BIOS before doing any flashing.

Strange that u got one backup that is 0kb. If you get errors while trying to flash your good BIOS back, you may need to make sure the clip is connected securely.

[nzie]

Originally Posted by osui818 But I have 3 bios tho 2 of them are 16,777,216 and 1 is 0, but I remember I used the bkpps30 and changed the name to bkpps3 to flash. So you saying i just have to use that bios and solder a wired and my ps3 will come back up?

Verify the bios 1st! having a dump with 16,777,216 bytes is not good enough