JB-King cracker thread - Page 3 - PS3Hax Network

Pockets69 · 03-22-2012

I will say for the Second time this needs a channel on IRC, Japsander will you do the honors and create one? also invite everyone on the thread there, i shall drop by later tonight to say hi :P

japsander · 03-22-2012

Originally Posted by Pockets69

I will say for the Second time this needs a channel on IRC, Japsander will you do the honors and create one? also invite everyone on the thread there, i shall drop by later tonight to say hi :P

I will do when I finish work

Gumbie · 03-22-2012

Originally Posted by hellsing9

As far as i know even skeet uses Actel chip...it's a generic chip?.

It's just a high security MCU.
An MCU is for all intentions an micro computer that has it's own everything built right in. Just like a computer it can run anything, but it also must be built for that particular computer.
They are used in a lot of devices and perform any number of completely different roles.

hellsing9 · 03-22-2012

Thans for the info @Gumbie

japsander · 03-22-2012

ok, ive set a channel up for anyone wanting to discuss things further in realtime or more privately

server = irc.ps3sanctuary.com
port = 6667
chan = #f**kdrm ( replace asterisks with "uc" of course )

zadow28 · 03-22-2012

thx japsander i will be on tommorow ,its getting late but i'll check the log.

Gonzakpo · 03-22-2012

Well, according to the Actel ProASIC 3 web page it is an FPGA. So, in reality, ANYTHING could be inside that FPGA. Also, it has flash memory so all the software we are looking for is inside the FPGA too (not like other FPGA that need an external memory to reprogram itself on boot).

I was wondering, what happened to the update somebody was able to unpack. It was like a s19 file or something like that right? Did somebody already find out for what microcontroller this program was compiled? By reading the ProASIC 3 decription there's a high probability that the program runs on a Cortex-M1. But well, the reality is that is an FPGA so there's really no way of knowing what's in there for sure.

Also, does anyone knows what does the updater does? Does it reprogram the FPGA or just the embedded microcontroller in it?

DjKlown · 03-22-2012

Yes zadow released the s19 files. They are for transferring info to a motorolla chip. They are somewhat encrypted to use that loosely. Pretty sure zadow has gotten thrpugh that by now wink. But th. t is just part of it. That code is on the front page in op

Gumbie · 03-22-2012

In semi related news, Mr DHL just dropped off a JB2USb to my door.
Tomorrow the fun begins on my side

Yes it would have been tonight - sadly I must goto the salt mines first to feed my family

Gonzakpo · 03-23-2012

Does anyone knows where to get the IDA Pro with the ARM disassembler?

03-22-2012	#21
Pockets69 Senior Member Join Date: Jan 2008 Location: Lisbon, Portugal Posts: 6,681 Likes: 2,087 Liked 2,449 Times in 1,389 Posts Mentioned: 138 Post(s) Tagged: 0 Thread(s)	I will say for the Second time this needs a channel on IRC, Japsander will you do the honors and create one? also invite everyone on the thread there, i shall drop by later tonight to say hi :P __________________ <eussNL> judge: ´so why did you torrent 5 million AVI of women moaning´ <eussNL> <TizzyT> i dont judge if it sounds good i listen

03-22-2012	#24
hellsing9 Hired Gun Join Date: May 2011 Posts: 6,724 Likes: 2,548 Liked 3,279 Times in 1,819 Posts Mentioned: 972 Post(s) Tagged: 1 Thread(s)	Thans for the info @Gumbie __________________ Check Blacklist of FAKE devs Check Whitelist of TRUSTED devs Tutorial : DEX conversion (TEST-DEBUG) One thread with all DEX information published so far. One thread with PS3 LV0 keys, CFW'S and many more. PS3devwiki your number 1 source. Check it. Console ID's Market Warning thread PS3 Ban, CFW, Unban. How to avoid it.

03-22-2012	#26
zadow28 Member Join Date: Dec 2011 Posts: 360 Likes: 235 Liked 857 Times in 185 Posts Mentioned: 188 Post(s) Tagged: 0 Thread(s)	thx japsander i will be on tommorow ,its getting late but i'll check the log. __________________

		PS3Hax Network - Playstation 3 Hacks and Mods > PS3Hax > PS3 \| Technical Development and Coding Area
JB-King cracker thread

03-22-2012	#25
japsander Join Date: Jun 2009 Location: up sh*t creek without a paddle Posts: 7,642 Likes: 2,745 Liked 5,250 Times in 2,510 Posts Mentioned: 358 Post(s) Tagged: 1 Thread(s)	ok, ive set a channel up for anyone wanting to discuss things further in realtime or more privately server = irc.ps3sanctuary.com port = 6667 chan = #f**kdrm ( replace asterisks with "uc" of course )

03-22-2012	#27
Gonzakpo Member Join Date: Nov 2011 Posts: 199 Likes: 25 Liked 94 Times in 50 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Well, according to the Actel ProASIC 3 web page it is an FPGA. So, in reality, ANYTHING could be inside that FPGA. Also, it has flash memory so all the software we are looking for is inside the FPGA too (not like other FPGA that need an external memory to reprogram itself on boot). I was wondering, what happened to the update somebody was able to unpack. It was like a s19 file or something like that right? Did somebody already find out for what microcontroller this program was compiled? By reading the ProASIC 3 decription there's a high probability that the program runs on a Cortex-M1. But well, the reality is that is an FPGA so there's really no way of knowing what's in there for sure. Also, does anyone knows what does the updater does? Does it reprogram the FPGA or just the embedded microcontroller in it?

03-22-2012	#28
DjKlown Member Join Date: Feb 2011 Posts: 170 Likes: 10 Liked 38 Times in 29 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Yes zadow released the s19 files. They are for transferring info to a motorolla chip. They are somewhat encrypted to use that loosely. Pretty sure zadow has gotten thrpugh that by now wink. But th. t is just part of it. That code is on the front page in op

03-22-2012	#29
Gumbie Member Join Date: Nov 2009 Posts: 34 Likes: 1 Liked 63 Times in 16 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	In semi related news, Mr DHL just dropped off a JB2USb to my door. Tomorrow the fun begins on my side Yes it would have been tonight - sadly I must goto the salt mines first to feed my family

03-23-2012	#30
Gonzakpo Member Join Date: Nov 2011 Posts: 199 Likes: 25 Liked 94 Times in 50 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Does anyone knows where to get the IDA Pro with the ARM disassembler?

User Name		Remember Me?
Password