[maneo]

Guys, my problem is that when I try tu use the downgrade bin file, the PS3 should tell a message of "Plug In USB Cable" but instead of that it just turns on and after 10 seconds approx. it turns off as it were a brick, can you help me?

[Chovoman]

Originally Posted by TDCroPower2 *** Update to the TUT *** !!! The way is actually solderless !!!

You should add at the end that without QA flag ,no other ofw or cfw can be flashed.
Or add QA flag app , how to start it ,and the flash ofw 3.41,and back OFW 3.55. So we have a factory 3.55 console :D and the tutorail is complete. I use your way + qa flag every time,and no problems till now.

[playerkp420]

Originally Posted by Chovoman You should add at the end that without QA flag ,no other ofw or cfw can be flashed. Or add QA flag app , how to start it ,and the flash ofw 3.41,and back OFW 3.55. So we have a factory 3.55 console :D and the tutorail is complete. I use your way + qa flag every time,and no problems till now.

Or you could use the way in my guide and you don't have to patch anything.

[keano]

Originally Posted by maneo Guys, my problem is that when I try tu use the downgrade bin file, the PS3 should tell a message of "Plug In USB Cable" but instead of that it just turns on and after 10 seconds approx. it turns off as it were a brick, can you help me?

Mate did you fix this ? I have the same problem with two PS3 here that are now dead.

[ZerOneX]

tks for the tuto

[Chovoman]

Originally Posted by playerkp420 Or you could use the way in my guide and you don't have to patch anything.

I dont like that downgrade.bin :D :D.

[kassawad]

yeah i can download the PS3 NOR Patcher dont not with donwgrade v2 :/
tryed any way byt i only get this error :S

http://imageshack.us/photo/my-images/4/14375392.png/

What to do?
thx

[sasodukac]

i have ps3 slim .It was on ofw 4.00 and i instaled e3 flasher and sucessfully downgrade to rogero cfw with E3 card reader.After that everything was fine untill i installed multiman 04.00.01 and when i restarted console i got RSOD i tried to restore backuped bios but it was 4.00 what i backuped and it bricked on 3.55 cfw .I have read the trick with SBE and PAO Tristate solder. I did that and it was sucsessfull. It sucsesfully start and restore 4.00 backuped bios Restore backuped bios 4.00 fine untill the step where i have to put my PS3 in Factory Service Mode.I press power + eject with JB dongle in it (in my case e3 card reader with apropriate bin in it. and nothing happens Ps3 cant read from it. I also cant turn off the consolo becouse power button doesnt work on shutdown also nothing on the screen cant initiate videoaudio output....Please anyone help i dont know what to do im dissapointed i got all this stuff e3 nor flasher e3 card reader iphone 3g and i cant get answer from anyone how to back my conssole in life

[TDCroPower2]

Originally Posted by kassawad yeah i can download the PS3 NOR Patcher dont not with donwgrade v2 :/ tryed any way byt i only get this error :S http://imageshack.us/photo/my-images/4/14375392.png/ What to do? thx

your dump are reversed? You must insert the backup from the e3 because it have the OFFSET 200 FI.I

a reversed backup have in the OFFSET 200 IFI

[kassawad]

i have put in the dump from e3.
Iam doing a backup right now...

" 1.2. set the 6 switch of the E3 Flasher:
1.3. put the MicroSD-Card into the E3-Flasher
1.4. starts the Playstation 3 and let it boots to the XMB
1.5. push the "Start"-Button on the E3-Flasher
the flash process begins and the 8 LEDs will one by one lights on
the flash success, when all 8 LEDs blinks.
1.6. shut down the Playstation 3
1.7. put the MicroSD-Card out of the E3-Flasher
1.8. save the backup from your MicroSD-Card to your PC in a folder like this: BackupPS3FlashFWXYZ (XYZ=FW-Version here 400)
WARNING: the backup must fit exactly the filesize of 16,777,216 Bytes **see here** and check it with the FlowRebuilder. If the backup don't fit the filesize or it's corrupt. Repeat the Steps complete from part 1.1."

and then when i put the "bkpps3.bin" in the "PS3 NOR Patcher.exe"
and still get "Dump has no IFI0. IFI0-tag missing at offset 200"
so how do i get it right?
what iam missing?