[Haisenberg]

I brick my PS3, I did the welding procedure. then put multiple files "bkpps3.bin" that is not my model, and my backup file I made before the brick is corrupted

Now, how do I make a backup of my original ps3?

Excuse my English translator google, I'm from Brazil

please someone help me!

[GOD_666]

Originally Posted by Pro.Hack I bricked my ps3 slim using the e3 flasher. I successfully downgraded from 3.73 to 3.55 and was experimenting with it and install a Modified pup and got bricked. I only backup the Bios on 3.73 which isn't going to work if bricked on 3.55 fw. My method is really easy and simple. First thing you would need to do is solder the wire SBE to PAO TRISATE as everyone knows that's how you reflash the backup bios, the purpose of this wire is to bybass the original start up and keep the ps3 on for a reflash. Now that you did that, go head and reflash any backup bios most likely gonna be the 3.73 dump you did in the beginning. If so flash it in. After the 8led flashes and it done, DO NOT TURN OFF PS3. Push switch 1-5 down and 6 up and push the reset button on the e3 flasher. Then take the sd card from the TF and plug it in your comp and keep your 3.73 backup bios in the card withe your downgrade.bin. Put back Card on TF and and push start, if without issues it should start installing the downgrade bin. When finished go head from there redo the downgrade process of e3 flasher but starting the next step with removing the power cable and replug. Put your JB dongle in 2nd usb drive and do the Power & eject method. Few seconds it should shut off and from there take usb drive and put step 1 files in usb drive LV2diag.self and ps3update.pup and put in pse usb and push power, next few minutes should reinstall CFW 3.55 Now put step 2 file LV2.self diag to get out of factory service mode in USB drive and put in ps3 and push power. Once again it should start and shut off. Now your set you are now officially unbricked with CFW 3.55. Any questions let me know. I take full ownership of this Jonathan Lantin

Hi, thanks for the tutorial but before i get excited i wanna get it straight....after i restore your modified backup i can use any backup and doesn't need to be the one from that console???

i'm asking because somehow my backup is corrupted even though it did register 100% ok but now it wont read and i cant restore

[Pro.Hack]

Hello, it all depends on how you bricked normally you would need your console dump whether its corrupted or not should work just fine as long it writes successfully to the Nor.


In some cases depending on the brick type you can use any dump from any console

[Haisenberg]

Originally Posted by Pro.Hack Hello, it all depends on how you bricked normally you would need your console dump whether its corrupted or not should work just fine as long it writes successfully to the Nor. In some cases depending on the brick type you can use any dump from any console

Pro Hack, my brick occurred soon after the backup BIOS, then I put all switches down. Since then I can not relive it. already put several BIOS that are not my console. and my backup is corrupt, how do I?

[aseweryn]

Hi everybody
I bricked my ps3 right after entering restore mode (000000). After I put e3_downgrade.bin file on sd card had a black screen and I couldn't install e3_downgrade.bin, I get 11001000 error.
I have working backup file. I did e3 repair method for bricked console but after installing my old backup I still have blak screen and hdd doesn't work.
I tried Pro.Hack sollution and the same error when I want to install downgrade file.
Can anyone help make my console work again

[GOD_666]

Originally Posted by Pro.Hack Hello, it all depends on how you bricked normally you would need your console dump whether its corrupted or not should work just fine as long it writes successfully to the Nor. In some cases depending on the brick type you can use any dump from any console

Ok so I successfully restored and didn't have to solder tristate and got upto installing downgrade.bin with success but now my USB ports aren't working I've checked the tracks and all seems fine. I'm tempted to bridge the power to 5v.

Please advise. Is this a common symptom with bricking should I try soldering the tristate

Thanks in advance

[leovaras]

Are you using a previously used e3 flasher from another console? If it is so then that could be the problem.

Sent from my LG-MS910 using Tapatalk

[GOD_666]

Originally Posted by leovaras Are you using a previously used e3 flasher from another console? If it is so then that could be the problem. Sent from my LG-MS910 using Tapatalk

Sorry are you refering to me or aseweryn

[Pro.Hack]

Originally Posted by GOD_666 Ok so I successfully restored and didn't have to solder tristate and got upto installing downgrade.bin with success but now my USB ports aren't working I've checked the tracks and all seems fine. I'm tempted to bridge the power to 5v. Please advise. Is this a common symptom with bricking should I try soldering the tristate Thanks in advance

If you can do any flashing to your console then you dont need to solder to tristate at all.

If your usb isn't working is only mainly from the ps3 didn't turn power to them but that usually happens during a downgrade and so keep trying all the steps over until you get them.

Also helps if you already have the JB dongle to second usb already plugged in during the downgrade

[aseweryn]

Originally Posted by leovaras Are you using a previously used e3 flasher from another console? If it is so then that could be the problem. Sent from my LG-MS910 using Tapatalk

Yes this is second console, first one I downgraded without any problem using video from e3 website. After that I updated E3 flasher with samsung firmware because I couldnt even backup my bios.
I dont know what else can I do. I can install my bios but console doesnt work
Thanks in advance