[stdule]

But if you brick a ps3 fan test no work.

[Hamz75]

Originally Posted by Nichibotsu what i get is that you have a broken negative wire and you put back together your console and had it running while having a broken fan. That resulted in overheating and now you have ylod... just my guess. P.S. no real dev would have his engine run without cooling...

I do not have YLOD firstly. I have never ran my PS3 now because it will overheat as my fan is not working. Yes by accident I broke the black wire I am looking for a solution? I am not stupid enough to run a PS3 with no fan... I reballed my PS3
************* [ - Post Merged - ] *************

Originally Posted by stdule But if you brick a ps3 fan test no work.

I have not bricked it this has nothing to do with the E3 flasher because that is fine. I know the fan is not working because of the black wire and again I am waiting for a solution so that I can get back to my 4.11 jailbreak. I want the PS HAX website to move forward and I want us to be the ones who had the 4.11 jailbreak...

[Wolfie708]

If you have broken the wire half way (or similar) then just cut it and re-join it. Solder and heat shrink sleeving works a treat.

First thing to check though is that is actually is a broken wire so get a continuity tester on it

[Hamz75]

Originally Posted by Wolfie708 If you have broken the wire half way (or similar) then just cut it and re-join it. Solder and heat shrink sleeving works a treat. First thing to check though is that is actually is a broken wire so get a continuity tester on it

Okay, I can't really explain it and it is kind of hard to. The wire is not cut sideways so it is still together but it is cut upwards so the wire is still together but the wire is cut upwards :/

[Wolfie708]

I know what you mean, it is not cut across its width, it is sliced along part of its length.

Get a tester on it first though to make sure the core is actually cut through.

[stdule]

your problem its fuse,black-gnd,brown-12v,grey- fan control

[Hamz75]

Originally Posted by stdule your problem its fuse,black-gnd,brown-12v,grey- fan control

what??????????????????????????????????
************* [ - Post Merged - ] *************

Originally Posted by Wolfie708 I know what you mean, it is not cut across its width, it is sliced along part of its length. Get a tester on it first though to make sure the core is actually cut through.

Yeah if the core is cut through what should I do?

[playerkp420]

Originally Posted by Hamz75 Model of my PS3 is CECHG03. I know that the fan test works on this console as I tried it before the downgrade and it worked fine. I will post some pictures when I open it next time.

I would like to see some pics of how you downgraded a nand model with the e3 flasher

[Hamz75]

Originally Posted by playerkp420 I would like to see some pics of how you downgraded a nand model with the e3 flasher

Honestly I can't be bothered I have researched quite abit before I made this thread if I did all the steps of the E3 flasher right and I have... this has nothing to do with the E3 flasher.

[Nichibotsu]

mmm well if the core is cut through cut the broken part and replace it with another wire, as wolfie said use solder and heat shrink sleeve : )