[isomaker]

JESUS!!! today i managed to jailbreak and using my 3eflasher limited edition & PS3key whit the latest jig fw from official site and now im on rogero 3.70fw how the heck that worked when i used 3.55fw ?

[euss]

you used v2 Rogero which has 3.7x spoof... nothing earth shattering, just plain outdated files (v3.1 is current with 4.11 spoof)

[isomaker]

ohhh.. well im im happy like ........ beacuse i didnt belive e3flasher would work =)

[isomaker]

Originally Posted by euss you used v2 Rogero which has 3.7x spoof... nothing earth shattering, just plain outdated files (v3.1 is current with 4.11 spoof)

so if i uppdate whit latest rogero it wont brick my consol ?

[playerkp420]

Originally Posted by isomaker so if i uppdate whit latest rogero it wont brick my consol ?

You can update to Rogero v3.1 without bricking. But you can not install any other OFW/CFW, without bricking. Unless you do dehashing.

I would suggest qa way is easiest in my opinion. But really the downgrade process is not complete until you dehash. You should do it to avoid a brick in the future.

[euss]

yes, clip it right.

http://www.ps3devwiki.com/wiki/E3#Problem_state_1

[isomaker]

Originally Posted by playerkp420 You can update to Rogero v3.1 without bricking. But you can not install any other OFW/CFW, without bricking. Unless you do dehashing. I would suggest qa way is easiest in my opinion. But really the downgrade process is not complete until you dehash. You should do it to avoid a brick in the future.

i took out the e3flasher yesterday beacuse the contacts realy s*cks on the board .

how do i install Rogero v3.1 over V2, do i need to have the flasher`installed ?

[isomaker]

i followed the guide here http://www.ps3hax.net/showthread.php?t=33989

Now my consoll bricked =)

[isomaker]

Originally Posted by Pro.Hack I bricked my ps3 slim using the e3 flasher. I successfully downgraded from 3.73 to 3.55 and was experimenting with it and install a Modified pup and got bricked. I only backup the Bios on 3.73 which isn't going to work if bricked on 3.55 fw. My method is really easy and simple. First thing you would need to do is solder the wire SBE to PAO TRISATE as everyone knows that's how you reflash the backup bios, the purpose of this wire is to bybass the original start up and keep the ps3 on for a reflash. Now that you did that, go head and reflash any backup bios most likely gonna be the 3.73 dump you did in the beginning. If so flash it in. After the 8led flashes and it done, DO NOT TURN OFF PS3. Push switch 1-5 down and 6 up and push the reset button on the e3 flasher. Then take the sd card from the TF and plug it in your comp and keep your 3.73 backup bios in the card withe your downgrade.bin. Put back Card on TF and and push start, if without issues it should start installing the downgrade bin. When finished go head from there redo the downgrade process of e3 flasher but starting the next step with removing the power cable and replug. Put your JB dongle in 2nd usb drive and do the Power & eject method. Few seconds it should shut off and from there take usb drive and put step 1 files in usb drive LV2diag.self and ps3update.pup and put in pse usb and push power, next few minutes should reinstall CFW 3.55 Now put step 2 file LV2.self diag to get out of factory service mode in USB drive and put in ps3 and push power. Once again it should start and shut off. Now your set you are now officially unbricked with CFW 3.55. Any questions let me know. I take full ownership of this Jonathan Lantin

if you were here i would give you a BIG BIG kiss, you saved me !!!!!!!!!

[Pro.Hack]

Originally Posted by isomaker if you were here i would give you a BIG BIG kiss, you saved me !!!!!!!!!

I am glad it worked for you, share your experience!!