[nishat]

I want to update my ps3 to 4.11 when i m going to update my ps3 there is an error the data is corrupted 8002f157 what i have to do please help

[nzie]

Originally Posted by nishat I want to update my ps3 to 4.11 when i m going to update my ps3 there is an error the data is corrupted 8002f157 what i have to do please help

Br drive connected?

[DEFAULTDNB]

Based on your previous thread:
http://www.ps3hax.net/showthread.php?t=39292

I think you should REALLY read this thread:
http://www.ps3hax.net/showthread.php?p=310694

Credits to @bartez82

I saw that many of you after use 3.55 Nor patched have 8002f157 error when try install official 4.00 firmware.I spend over week to try to help You and solve that problem.Just follow my tutorial and Your problem will solve for good

[nishat]

You mean to say that i have to reinstall the e3 flasher again and do the downgrade process again from starting.

[DEFAULTDNB]

Do what it takes to know your PS3 will be fixed.

[nishat]

Did i have to dump my nand again or not as i mentioned before thread ps3 downgrade that i have downgraded my ps3 yesterday when it turns on it shows ROGERO ps3 and ver 3.70 after i chaged my hdd and what u have told me i done like that then i desided to update ps3 to 4.11 and redowngrade ps3 but the error shows i have a dump of 4.11 i just only want to ask that do i have to dump my nand again or not sorry for asking everytime please help me.
************* [ - Post Merged - ] *************
Mate help me please

[nzie]

Originally Posted by nishat Did i have to dump my nand again or not as i mentioned before thread ps3 downgrade that i have downgraded my ps3 yesterday when it turns on it shows ROGERO ps3 and ver 3.70 after i chaged my hdd and what u have told me i done like that then i desided to update ps3 to 4.11 and redowngrade ps3 but the error shows i have a dump of 4.11 i just only want to ask that do i have to dump my nand again or not sorry for asking everytime please help me. ************* [ - Post Merged - ] ************* Mate help me please

maybe @euss NL can help you

[nishat]

I have to dump my nand again or not.

[DEFAULTDNB]

Have you fixed it?

I'm not sure. Making a dump now wouldn't be a bad thing, just dont lose your previous dump. keep em all!

@playerkp420 will know better than me about E3.

[playerkp420]

I am a little confused as to the exact problem. I do know that error is:

?corrupt? 	0x8002F157 	firmware related error / HDD Exchange error - 3.56-1st BUG

So from what I see is you have damaged your hdd. But you have a new one and are trying to reinstall your firmware?

So you have formatted you working hdd, with your pc to fat32.

When you put the hdd into the PS3 and boot up it, you get a recovery screen to format the hdd and put firmware on your usb.

What I don't understand is you say you downgraded, but it is asking for 4.11?
Did you already update to 4.11, before this happened or at any time trying to fix?

What I would do is:
1. install the e3 flasher.
2. make a backup and check to make sure it is good. (this will insure that the clip is secure)
3. Use flash fun mode to flash your backup of when you were on Rogero 3.55.
4. Reboot PS3 with the hdd connected and the recovery screen should say it wants 3.55.
5. Put Rogero v3.1 pup on USB flash drive with folder structure:
USB root: PS3/UPDATE/PS3UPDAT.PUP
6. follow on screen instructions and you should be on Rogero with 4.11 spoof.
7. Then do dehashing by following the guide below, starting from the spoiler "QA Flag"

If you only have a backup from before you downgraded then do this:
1. install the e3 flasher.
2. make a backup and check to make sure it is good. (this will insure that the clip is secure)
3. Use flash fun mode to flash your backup.
4. Then follow the guide below from the spoiler "Downgrade to Rogero v3.1 w/ 4.11 Spoof". You can use the new backup you made or the original.