[alex-07]

Originally Posted by DK333 Thanks for replying to me but can u patch it and send me a link for that again? please and thank I cant live another day without ps3!

here are the patched bkpps3.bin rename it to bkpps3.bin to use it then under FUN-MODE : 100000 and flash then the ps3 nor.

TO VALIDATING a DUMP READ HERE!

HOW TO USE TO PATCH YOUR OWN GOOD DUMP THIS!

if you like to get live help, join the chat ps3downgrade or chat ps3downgrade

use better this for chat channels

[IcE dRaGoN]

Hello Guys

i Wanna ask
Have anyone Test the E3 Downgrading on Ps3 v.4.20 Yet ?
and it will be the Same File for the 4.11 or Need Some Modification on them

[alex-07]

Originally Posted by IcE dRaGoN Hello Guys Have anyone Test the E3 Downgrading on Ps3 v.4.20 Yet ?

yes, works all good, like befor on ofw411! also on ofw420 !
NO Need of some Modification on them!!!!

if you like to get live help, join the chat ps3downgrade or chat ps3downgrade

use better this for chat channels

[IcE dRaGoN]

Originally Posted by alex-07 yes, works all good, like befor on ofw411! also on ofw420 ! NO Need of some Modification on them!!!! if you like to get live help, join the chat ps3downgrade or chat ps3downgrade use better this for chat channels

Thanks Alex
can i ask you Another Question
i Heard from Some People that E3 Flasher need Some Soldering to use the Dual Boot Features !
did They Mean it is Necessary to do ?
or you can use Dual Boot without Soldering ?
and the Soldering Job just make it Faster to Switch ?

Thanks

[averybomb1]

hey does anyone know if, well i read this tutorial and i also saw tutorials by kahlkedon. What if i don't want that CFW? I just wanted to put KMEAW's 3.55. After 2.3.19 instead can i go back to kahlkedon's method, or do i have to dit exactly like this. I like the idea of using the e3 flasher more then once. Also if someone could answer can i remove the nor clip (softboard) once i'm done, and then re-use it for more installations?

[playerkp420]

Originally Posted by averybomb1 hey does anyone know if, well i read this tutorial and i also saw tutorials by kahlkedon. What if i don't want that CFW? I just wanted to put KMEAW's 3.55. After 2.3.19 instead can i go back to kahlkedon's method, or do i have to dit exactly like this. I like the idea of using the e3 flasher more then once. Also if someone could answer can i remove the nor clip (softboard) once i'm done, and then re-use it for more installations?

After downgrading to Rogero, you can follow the guide below from the spoiler Qa flag. That will get you on any CFW you want.

To use e3 flasher on multiple consoles, use the Samsung 10.28 update.bin to update the flasher.

[TenJo]

Originally Posted by playerkp420 After downgrading to Rogero, you can follow the guide below from the spoiler Qa flag. That will get you on any CFW you want. To use e3 flasher on multiple consoles, use the Samsung 10.28 update.bin to update the flasher.

you will get a brick, this is risky as hell

[playerkp420]

Originally Posted by TenJo you will get a brick, this is risky as hell

What? This is not risky. I have done a lot of consoles and have not had a problem with any.

[SONIC_FD]

It is possible to downgrade?

PS3 Model: CECH2511A
Board model: JTP-001
Minimal Firmware Checker: 3.56

[averybomb1]

Originally Posted by playerkp420 What? This is not risky. I have done a lot of consoles and have not had a problem with any.

Are you sure? And have you done each one of them with this method? I'm kinda worried, but just a question, if I do end up getting bricked, they said on this tutorial how to unbrick, has anyone tested the unbricking method yet, to see if it works? Also if I use my E3 Flasher on multiple consoles, do i have to update my nor flash every time, like does it stay in the softboard or does it go to the chip?
************* [ - Post Merged - ] *************
Well just wanted to post some basic noobie tutorials to add to this, the first is to set up ps jailbreak or a clone that looks exactly like it:
PS jailbreak USB Upgrade Guide:

First Download and install Atmel FLIP 3.4.2 for PS jailbreak USB upgrade

When installed, go to installation folder, namely Atmel Flip 3.4.2usb, find libusb0.dll and libusb0_x64.dll, copy them to folder Flip 3.4.2in.

Then plug PS jailbreak into USB port in PC, the red green light will light up.

Meanwhile PC reminds you that unusable unkown device found.

Ignore it, wait for a few seconds, new hardware AT90USB162 DFU will be found, pc asks you to provide driver.

PSJailbreak USB Upgrade Instruction-Game Accessories

choose USB folder in Flip as the Install Path, for example AtmelFlip 3.4.2usb

PSJailbreak USB Upgrade Instruction-Game Accessories

then the installation of PSjailbreak USB begins.

PSJailbreak USB Upgrade Instruction-Game Accessories

When the driver is installed, we can write on AT90USB162.

PSJailbreak USB Upgrade Instruction-Game Accessories

Run Flip, go to Device -> Select..., and choose AT90USB162

PSJailbreak USB Upgrade Instruction-Game Accessories

Then go to File -> Load HEX File...

PSJailbreak USB Upgrade Instruction-Game Accessories

Choose the HEX file you want to write into the PSjailbreak USB,

PSjailbreak_v1_0913.hex

PSjailbreak_lv2_test0919.hex

PSjailbreak_lv2_hermes_beta0923.hex

PSjailbreak_jevinskie_3_01_beta1005.hex

PSjailbreak_jevinskie_3_15_beta1005.hex

PSjailbreak_jevinskie_3_41_beta1005.hex

PSjailbreak_hermes_v3_beta1006.hex(New!)

Attention: HEX must be put in the English path so that it can be read.

Then you can see HEX file parsed shown in the left bottom.

PSJailbreak USB Upgrade Instruction-Game Accessories

Then go to Settings -> Communication ->USB, choose OPEN USB port.
PSJailbreak USB Upgrade Instruction-Game Accessories

Then the chip is open and ready to be written.

PSJailbreak USB Upgrade Instruction-Game Accessories

Check HEX File, make sure if it’s the right HEX that you want to write into.

Choose RUN in the left bottom, then the chip is being written. It will be done in a few seconds.

You will see Verify PASS in the left bottom when it’s finished.

PSJailbreak USB Upgrade Instruction-Game Accessories

Now the chip has been written. Turn off Flip and unplug the PS jailbreak USB out of PC.

Here is tutorial if you are gonna use E3 Card Reader Setup:

How to downgrade firmware 3.42/3.50 or above to firmware 3.41 with E3 Card Reader :
1. Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
2. Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
3. Turn off system via menu
4. Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
5. Load any blank FAT32 USB flash drive device with 2 files in the root directory:
1. Modified 3.41 PUP
2. Lv2Diag.self (File 1)
6. These must be the only files on the USB key and must be placed in the main (root) directory.
7. Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
8. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
9. Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
10. (Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
11. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
12. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
13. Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.

To go back to E3 Card Reader jailbreak device, just drag back the normal .bin files. - e3 card reader, new generation ps3 chip with mulit-function
Files can be downloaded at E3DIY
Leaked modified 3.41 PUP and Lv2Diag.self files - Download DGF.rar from Sendspace.com - send big files the easy way
E3 Official Site: e3 card reader, new generation ps3 chip with multi-function
News Source: DCEmu Reviews

Hope this helps beginners