|
|
#1 |
|
Apprentice
![]() Join Date: Apr 2012
Posts: 17
Likes: 4
Liked 1 Time in 1 Post
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Help with dumps and unbricking.
Got E3 flasher, and 5 PS3 dumps.
Now I totally killed my PS3, both flashes had working dual boot. Now I PROLLY don't have bios backup of 4.11, but I do of 3.55 (sure) and 3.70 but don't ask me which dump is what. Seeming I succesfully made dual boot, I might aswell assume that the dumps are correct. Here are 5 dumps, aprox 30Mb. How do I patch them correctly ? And do I need to reverse them if they are patched, or before patch ? Also which ones are good is someone could check perhaps ? http://www.filedropper.com/ps3dumps Thanks. (Yes total brick, CFW ylod. Ofw only hard turn off (CUTTING power). Tristate is obvious soldered aswell for those who wonder. Please
|
|
|
|
|
|
#2 | |
|
Member
![]() Join Date: Jan 2012
Posts: 58
Likes: 20
Liked 23 Times in 17 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
dump2+dump3+dump3 ros0 411 + ros1 411 dump2 use for bkpps3.patch.bin ros0 355 + ros1 355 ready for downgrade and use on micro-sd-card(rename it to bkpps3.bin) ! your ps3 part of serial xx-27439222-xxxxxxxx so you can check if its same on ps3! do it your self and use flowrebuilder to extract you xxx.bin, then you will see the sdk_version inside folders ros0 + ros1(last installed firmware) In case you like to do it self here if you like to get live help or check your dump, join the chat ps3downgrade or chat ps3downgrade use better this for chat channels Last edited by alex-07; 06-29-2012 at 11:51 AM. |
|
|
|
|
|
Likes: (1) |
|
|
#3 | |
|
Apprentice
![]() Join Date: Apr 2012
Posts: 17
Likes: 4
Liked 1 Time in 1 Post
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
So simple reflashing the second dump should boot my PS3 again? What is the stuff about 'patching' it before flashing ? (patched dump) |
|
|
|
|
|
|
#4 | |
|
Member
![]() Join Date: Jan 2012
Posts: 58
Likes: 20
Liked 23 Times in 17 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
if you use the patch I post on top, you can downgrade and use again dualboot |
|
|
|
|
|
Likes: (1) |
|
|
#5 | |
|
Apprentice
![]() Join Date: Apr 2012
Posts: 17
Likes: 4
Liked 1 Time in 1 Post
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
But I am a little confused. 1) Do I need to restore 4.11 dump (second orginal dump, UNPATCHED) Or 4.11 dump UNPATCHED but reversed ? 2) Can I downgrade directly with pre made PATCHED dump and afterwards clone and upgrade ? Currently I don't seem to get in downgrade mode, as PS3 turns itselfs of after trying service mode with PATCHED dump. But it doesn't read of my downgrading USB like it supposed to do. What part am I going wrong ? Thank you very much already! |
|
|
|
|
|
|
#6 |
|
Member
![]() Join Date: Jan 2012
Posts: 58
Likes: 20
Liked 23 Times in 17 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
read it please here or on wiki if you like to get live help or check your dump, join the chat ps3downgrade or chat ps3downgrade use better this for chat channels |
|
|
|
|
Likes: (1) |
|
|
#7 | |
|
Apprentice
![]() Join Date: Apr 2012
Posts: 17
Likes: 4
Liked 1 Time in 1 Post
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
I can't seem to get in downgrade mode. And if I do (automatic turnoff) with my desire phone in recovery mode, it does turn off. But it doesn't beep and if I recall correctly when putting ps3 in service mode does beep turnoff, and not turnoff. Also it doesnt automatic install with my, previous working AND unchanged since, usb with .self file and PS3UPDAT.pup. |
|
|
|
|
|
|
#8 | |
|
Senior Member
![]() Join Date: Dec 2011
Posts: 4,396
Likes: 947
Liked 1,520 Times in 1,097 Posts
Mentioned: 784 Post(s)
Tagged: 0 Thread(s)
|
__________________
HOW TO DOWNGRADE W/E3 FLASHER TO ANY OFW/CFW
Nor model PS3 downgrade service in U.S.A. if you don't want to do it yourself For downgrade help join irc at effnet-Just enter name and channel is #ps3downgrade |
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|