[ricardosvp]

The JB-king homepage dont says anything new!!!

[CaptainCPS-X]

Originally Posted by ricardosvp The JB-king homepage dont says anything new!!!

Indeed, please check my previous post (previous page).

SeeYa!

[Nicolas19]

Originally Posted by CaptainCPS-X Indeed, please check my previous post (previous page). SeeYa!

Edited............

[kenzya]

Sniper V2 - BLES - Works
Max Payne 3 - BLES - Works

[juanchuloperron]

tuto for 2.7 jbking:
Update method :
1. Press on JB-King upgrade switch and plug in main USB interface. Open "Upgrade.exe" and upgrade with the "updrade2.7.dfu" file. Then pull out JB-King and close "Upgrade.exe"
2. Do not press on JB-King power switch. Plug the dojngle into PC. After about 5-8 seconds, pull out JB-King.
3. Press on JB-King upgrade switch power again, and plug it into USB interface. Open "Upgrade.exe" and upgrade "S_2.7.dfu". The process will last for a longer time, please be patient !
4. If you get tips as follows, congratulation, your dongle is updated successfully !

[CaptainCPS-X]

Originally Posted by juanchuloperron tuto for 2.7 jbking: Update method : 1. Press on JB-King upgrade switch and plug in main USB interface. Open "Upgrade.exe" and upgrade with the "updrade2.7.dfu" file. Then pull out JB-King and close "Upgrade.exe" 2. Do not press on JB-King power switch. Plug the dojngle into PC. After about 5-8 seconds, pull out JB-King. 3. Press on JB-King upgrade switch power again, and plug it into USB interface. Open "Upgrade.exe" and upgrade "S_2.7.dfu". The process will last for a longer time, please be patient ! 4. If you get tips as follows, congratulation, your dongle is updated successfully !

Gracias por el tutorial compa, pero no se si te fijastes que verifique el paquete que posteaste previamente, y son los mismos ficheros que los del PB2 v1.02, es decir que no ha cambiado nada de lo que dije en mi primer post.

Parece que alguien hizo un paquete no official del JB-King y lo puso en esa pagina.

Gracias de todos modos compa =)

Saludos!


PS: Sorry for speaking spanish, but I was clearing out some things to him because I believe he thinks that PB2 v1.02 FW files and those files he linked are different, and the truth is that they are identical.

[ricardosvp]

My jb-king stop working after the upgrade (2.71), anyone knows the right order to restore it? Thanks.

[kenzya]

Originally Posted by ricardosvp My jb-king stop working after the upgrade (2.71), anyone knows the right order to restore it? Thanks.

Make sure you also install the PB firmware or else you will get a black screen on boot

[ricardosvp]

But the uploader says:
"After connecting the JB-King dongle flashed with the PB2 FW to my PS3, I turned it on and as expected, everything was fine. I didnt even change my PS3 CFW, still using the JB-King CFW v2 provided in their site."
I have to use PB2 Fw or not?

[CaptainCPS-X]

Originally Posted by ricardosvp But the uploader says: "After connecting the JB-King dongle flashed with the PB2 FW to my PS3, I turned it on and as expected, everything was fine. I didnt even change my PS3 CFW, still using the JB-King CFW v2 provided in their site." I have to use PB2 Fw or not?

Don't panic =), I will help you out (it happened to me as well xD). First of all if you installed JB-King provided CFW 3.55 v2, then you dont need to re-install any CFW. Both PB2 CFW and JB-King CFW are the same.

Now, if for some reason your JB-King dongle is not working right, for example is not letting your PS3 boot up correctly freezing it up, then just follow these steps to recover its original FW 2.3.

Edit: You will need these files to do the 2.3 recovery, http://www.sendspace.com/file/1ov9sn (JBKING 2.51.rar)

- While pressing your JB-King upgrade switch / button connect it to your PC
- Using the 'Upgrade.exe' tool from JB-King load "2.3_upgrade.dfu" (2 MB)
- Wait for it to upgrade your dongle, this will take a few minutes.
- After it finishes, close the Upgrade Tool and disconnect the dongle from the PC (don't use the Safely Remove Hardware on Windows, just disconnect it)

Now let's go to phase 2 of FW upgrade to 2.3...

- Again, While pressing the JB-King upgrade switch / button connect it to your PC
- Using the 'Upgrade.exe' tool from JB-King load "upgrade 20111220.dfu" (25 KB)
- Wait for it to upgrade your dongle, this will take less time than the first.
- After it finishes, close the Upgrade Tool and disconnect the dongle from the PC (don't use the Safely Remove Hardware on Windows, just disconnect it)

Finally do that same procedure but with the 2.7 and 2.71 FW update files from PB2 v1.02 as I indicated on my original thread.

If everything went ok you should see "Firmware 3.55, True Blue v2.7" on your PS3 System Information, if you don't see that then let me know so I can help you again.

UPDATE: Max Payne 3 (BLUS) is working fine after making a JB-King FW recovery from 2.3 then went directly to PB2 2.7 -> 2.71 (PS3 System Information now display True Blue 2.7).

UPDATE 2!

Tested Tom Clancy's Ghost Recon Future Soldier (BLUS-30521 / TB Patch), Working fine now!
Tested Prototype 2 (BLUS-30756 / TB Patch), Working fine now!

UPDATE 3: The main thread has been updated with the new revised procedure in case anyone doesn't see the proper version of the dongle FW in the PS3 System Information.

SeeYa!