[Nicolas19]

Originally Posted by u.s Many thanks to Nicolas19 and CaptainCPS-X for your guides. I tried Nicolas19s guide first with no luck and then Captains guide, again no luck. System settings still show v2.5. Will try again using a different computer.

No my Guy
Please try again
i tested My Method on 25 JB-King and Working 100%

[yoppie]

not work for me too. why?

[Nicolas19]

Originally Posted by yoppie not work for me too. why?

you tested My Method?ummmmmmmmmmm
F @cki ng Question!?you used CFW TB V2?

[Dolnor]

the key moment in all this SPI reflashes is that you have to unplug it from the usb port and then replug it without using the button (it will be detected as a Hub device), then unplug it and plug back in this time holding the button. this has to be done after every SPI flash procedure that you do to the dongle or the microcode on the chip is not being updated properly.

[yoppie]

Originally Posted by Nicolas19 you tested My Method?ummmmmmmmmmm F @cki ng Question!?you used CFW TB V2?

yes, used cfw tbv2. thx

[u.s]

Originally Posted by Dolnor the key moment in all this SPI reflashes is that you have to unplug it from the usb port and then replug it without using the button (it will be detected as a Hub device), then unplug it and plug back in this time holding the button. this has to be done after every SPI flash procedure that you do to the dongle or the microcode on the chip is not being updated properly.

YES !!!!
thank you very much, now working.
used Captains guide and did PHASE1 and PHASE2 of 2.3, then unplug dongle and plug back in (without holding button) and wait for USB hub detected message, then pull out the dongle.
Push button on dongle and plug it in to usb port and continue with PHASE1 and PHASE2 of 2.7, then unplug dongle and plug back in (without holding button), computer will show message 'Unrecognised Device', unplug from PC and use in PS3.
This is the method that worked for me.

[jennys]

It would be nice to be able to purchase these boards blank and simply flash them, although there is probably some customization/detection of specific HW addons to deter people from doing so. I'd be willing to try ordering a few, but I have OFW so it would be pointless.

@CaptainCPS-X

You're sure pumped up over a toy, but your attention to detail regarding your documentation, pictures and concise instructions are refreshing to see compared to most of the poorly composed guides for PS3 related projects. Keep it up and thanks for contributing.

[CaptainCPS-X]

Originally Posted by jennys It would be nice to be able to purchase these boards blank and simply flash them, although there is probably some customization/detection of specific HW addons to deter people from doing so. I'd be willing to try ordering a few, but I have OFW so it would be pointless. @CaptainCPS-X You're sure pumped up over a toy, but your attention to detail regarding your documentation, pictures and concise instructions are refreshing to see compared to most of the poorly composed guides for PS3 related projects. Keep it up and thanks for contributing.

Thanks for your comments! =), I love technology overall and more if it have to do with videogames. I been around other scenes like for example the Arcade Emulation scene (that's where my nickname came from, CPS = Capcom Play System).

I like to get involved in things like this, very deep, because it allows me to learn a lot of things, and as a programer I feel like I'm finding gold hehe =P

Comments like yours motivate me to keep doing the stuff that I do and help others, so thank you!

Btw, one of my projects for the PS3 scene was multiMAN Retro Tools long time ago ( http://www.ps3hax.net/2011/06/multim...om-management/ ). Maybe I get motivated enough to contribute again with something for the scene.

Take Care! SeeYa!

[apexcore]

Originally Posted by u.s YES !!!! thank you very much, now working. used Captains guide and did PHASE1 and PHASE2 of 2.3, then unplug dongle and plug back in (without holding button) and wait for USB hub detected message, then pull out the dongle. Push button on dongle and plug it in to usb port and continue with PHASE1 and PHASE2 of 2.7, then unplug dongle and plug back in (without holding button), computer will show message 'Unrecognised Device', unplug from PC and use in PS3. This is the method that worked for me.

Yep, the plug and unplug trick worked for me too. I'm using Nicolas19's files btw.

[jennys]

Originally Posted by CaptainCPS-X Take Care!

Speaking of Capcom; I really enjoy playing some of their games with friends. I just had to track down some very tiny components to fix my 1.6b XBOX so I'm back in action!

I'm also working on a project; a lifetime dream of mine I've come to realize over the first half of this year. It sure is rewarding to create something especially if others can make use of it.

Oh, you're welcome for comments.