After inserting E3 Flasher my ps3 not booting. - PS3Hax Network

Akintex · 07-10-2012

e3 inserted....................
thanks.

jackkiej · 07-11-2012

Originally Posted by Akintex

After inserting E3 Flasher my ps3 not booting.

and also eject my bd disk.

pls give me solution.

do you get ylod when e3 flasher is connected?
because if you get ylod you need to send it back for a new one, because i had this problem too and am now receiving a new one

playerkp420 · 07-11-2012

It would help to know your model #. I have found that some fat PS3s are more sensitive, with getting the heat sinks to make good connection with the chips.

Or even if it is a slim and you have to much on top of the clip to try and get a permanent press onto the chip.

Basically if the CPU and GPU are not flush with the heat sinks, and have thermal compound applied correctly, your PS3 will not boot.

DeezShineyNutz · 07-11-2012

Check your eSata connection. Mine wouldn't boot last night, but after moving sata cable around it booted no problem

Akintex · 07-13-2012

i am using , new e3 flasher without esata station. i inseted in my ps3[(CECH-2101A) mfd-2010 ofw-3.70], for dumping my nor backup. i started my ps3 it is not booting.
gives dual beep on when i pressed eject button.

please help.

carldenning · 07-13-2012

Originally Posted by Akintex

i am using , new e3 flasher without esata station. i inseted in my ps3[(CECH-2101A) mfd-2010 ofw-3.70], for dumping my nor backup. i started my ps3 it is not booting.
gives dual beep on when i pressed eject button.

please help.

do u have a hdd connected ,

playerkp420 · 07-13-2012

Originally Posted by Akintex

i am using , new e3 flasher without esata station. i inseted in my ps3[(CECH-2101A) mfd-2010 ofw-3.70], for dumping my nor backup. i started my ps3 it is not booting.
gives dual beep on when i pressed eject button.

please help.

Try pressing the power button not the eject button.

Seriously though, does it boot if you uninstall the flasher?
Try and reseat the clip and make sure the motherboard is not being flexed by whatever you are holding the clip on with.

@carldenning
You can downgrade without the hard drive connected. It just boots to the screen that says it cant find the hdd.

haz367 · 07-14-2012

best thing to put on the clip is something that can be pushed down while tighten up the 4 screws, a coin on top i never used if one used a little to much/high, u can feel see it when screwing the aluminium topcover back on. gently screw down kruislings/crossway? lol..so its not liften to much on 1 side, evenly pushed down like that

did u clipped it 180 degrees?, on left topside of NOR chip is small dot that's the top, always clip E3 with ribbon facing down that small dot.

clip is lame, if u take the time it works each single time tho, and if u go by playerkp420, u can flash a couple with it hahah

goodluck

Akintex · 07-14-2012

Originally Posted by carldenning

do u have a hdd connected ,

i have not conected hdd.i have not esata station. i want to know that without hdd e3 flasher will boot ps3 or not.

Kenneth01 · 07-14-2012

You need hdd connected to the ps3.,

07-10-2012	#1
Akintex Apprentice Join Date: Jul 2012 Posts: 17 Likes: 4 Liked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	After inserting E3 Flasher my ps3 not booting. e3 inserted.................... thanks. Last edited by Akintex; 04-08-2013 at 03:08 AM.

07-11-2012	#3
playerkp420 Senior Member Join Date: Dec 2011 Posts: 4,430 Likes: 963 Liked 1,538 Times in 1,107 Posts Mentioned: 794 Post(s) Tagged: 0 Thread(s)	It would help to know your model #. I have found that some fat PS3s are more sensitive, with getting the heat sinks to make good connection with the chips. Or even if it is a slim and you have to much on top of the clip to try and get a permanent press onto the chip. Basically if the CPU and GPU are not flush with the heat sinks, and have thermal compound applied correctly, your PS3 will not boot. __________________ HOW TO DOWNGRADE W/E3 FLASHER TO ANY OFW/CFW Nor model PS3 downgrade service in U.S.A. if you don't want to do it yourself For downgrade help join irc at effnet-Just enter name and channel is #ps3downgrade

07-14-2012	#8
haz367 Senior Member Join Date: Dec 2010 Posts: 2,038 Likes: 1,039 Liked 583 Times in 473 Posts Mentioned: 237 Post(s) Tagged: 0 Thread(s)	best thing to put on the clip is something that can be pushed down while tighten up the 4 screws, a coin on top i never used if one used a little to much/high, u can feel see it when screwing the aluminium topcover back on. gently screw down kruislings/crossway? lol..so its not liften to much on 1 side, evenly pushed down like that did u clipped it 180 degrees?, on left topside of NOR chip is small dot that's the top, always clip E3 with ribbon facing down that small dot. clip is lame, if u take the time it works each single time tho, and if u go by playerkp420, u can flash a couple with it hahah goodluck Last edited by haz367; 07-14-2012 at 07:25 AM. Reason: crappy keyboard ;)

		PS3Hax Network - Playstation 3 Hacks and Mods > PS3Hax > PS3 \| Downgrading and Flashing
After inserting E3 Flasher my ps3 not booting.

07-11-2012	#4
DeezShineyNutz Apprentice Join Date: Jul 2012 Posts: 26 Likes: 28 Liked 2 Times in 2 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Check your eSata connection. Mine wouldn't boot last night, but after moving sata cable around it booted no problem

07-13-2012	#5
Akintex Apprentice Join Date: Jul 2012 Posts: 17 Likes: 4 Liked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	i am using , new e3 flasher without esata station. i inseted in my ps3[(CECH-2101A) mfd-2010 ofw-3.70], for dumping my nor backup. i started my ps3 it is not booting. gives dual beep on when i pressed eject button. please help.

07-14-2012	#10
Kenneth01 Apprentice Join Date: Jul 2012 Posts: 29 Likes: 8 Liked 1 Time in 1 Post Mentioned: 3 Post(s) Tagged: 0 Thread(s)	You need hdd connected to the ps3.,

User Name		Remember Me?
Password