[Nicolas19]

i am going to attempt this do i need other os with ss.patch

Your mean is a CFW With ss.patch?or Other OS with ss.patch?
your mean is Below Link?
http://www.ps3devwiki.com/wiki/Other...ith_SS_Patches

[eddie16232]

thanks guys

[depblkman]

Originally Posted by OrangeC Can someone please tell me if my ps3 is bricked or not? its not showing a blinking light. Just audio and no video. Tried going into recovery but nothing.

turn off the ps3. hold the power button down until it beeps then let go. sounds like you have a hdmi cable hooked up and the ps3 didnt see it. this is the way to configure your video for hdmi

[haz367]

Originally Posted by Nicolas19 Your mean is a CFW With ss.patch?or Other OS with ss.patch? your mean is Below Link? http://www.ps3devwiki.com/wiki/Other...ith_SS_Patches

if u have RebugOOS no patches, it stil works for this, verified and ""dump" is the same with and without patches and for "dd" command its build into petitboot image, only for this part it isn't required, if u start from scratch it couldn'r hurt to use OtherOS ss patches, for later use with other ps3tools
for pwn metldr rebugoos worked fine

btw: i must have done somethign wrong/used wrong "memdump" file or needed to be patched to work, on ps3mfw355 the "npdrm.pkg" works fine and "all three" backups(petitboot/dump_flash/memdump final) are identical

[james28909]

i keep getting Failed: kexec /var/petitboot/mnt/ps3dd2/boot/

what am i doung wrong now i got
"sbin/init: error while loading shared libraries: libselinux.so.1: cannot open shared object file: no such file directory
kernel panic - not syncing: attempt to kill init!
call trace:


and then it hangs right there.. :0


i also get alot of "failed: read only" errors, like when i type reboot, it will have abunch of failed: read only errors

[coragin]

Hey guys back again.

Well I ran metldrpwn, copied "dump" used Cex2Dex with my original Flash dump to create DEXFLASH.bin

Loaded into petitboot.

Ran code dd if=dexflash.bin of=/dev/ps3nflasha bs=1024 (size of dexflash.bin 245,504kb)

It ran a jumble of code, said something along the lines of "disk full" or something

replaced 1089+0
removed 1088+0

The above numbers are not exact!

What did I do wrong?

(I did not do any hex editing as 1. I suck at that, 2. Cex2Dex was supposed to do it.)

[JonahUK]

@coragin

You on a NAND or NOR?

I'm assuming NAND because the size of the dump you are trying to write is 239mb.

Cex2Dex will make the changes for you (Gunner54's version will anyway).

Has anybody here successfully flashed a NAND yet?

I'm currently on OFW but can get hold of an old phat on CFW so I wouldn't mind having a go at this.

What's the safest way of flashing a NAND? Linux? Preloader? Should the full flash be written or just the region at 80800 (EID)?

[StealthLord]

You check at your own risk!

Source: http://www.ps3-hack.com.pl/index.php...,10992.30.html

CEX to DEX - Rapid method for, by cotojestwtf

Here my conversion without play in the linuxy etc.. Just download and install the update as normal firmware.

READ BEFORE Downloaded:
> This is only interesting for those who want to check what is DEX - but it is probably from this is Rebug
> Install the FW only 3.55.
> After this operation, you can not install such a higher DEX FW 4.11.
> Tested on CECHJ facie do not know how to slimami other models as well as FAT. You install at your own risk.
> I do not know whether there back to CEX without flasher. trololol.
> Publish only because, to show that such a softmod is possible.
> It works homebrew is peek & poke.
> Games you can fire off using multiman, or method known to DEX.

Compatibility
CECHJ

Download: http://www.sendspace.com/file/ar58yc

You tested? write on what model and how it went

[DEFAULTDNB]

Originally Posted by StealthLord You check at your own risk! Source: http://www.ps3-hack.com.pl/index.php...,10992.30.html CEX to DEX - Rapid method for, by cotojestwtf Here my conversion without play in the linuxy etc.. Just download and install the update as normal firmware. READ BEFORE Downloaded: > This is only interesting for those who want to check what is DEX - but it is probably from this is Rebug > Install the FW only 3.55. > After this operation, you can not install such a higher DEX FW 4.11. > Tested on CECHJ facie do not know how to slimami other models as well as FAT. You install at your own risk. > I do not know whether there back to CEX without flasher. trololol. > Publish only because, to show that such a softmod is possible. > It works homebrew is peek & poke. > Games you can fire off using multiman, or method known to DEX. Compatibility CECHJ Download: http://www.sendspace.com/file/ar58yc You tested? write on what model and how it went

First post... link doesnt work, but dl link does..... hmmm what does anyone think?

cotojestwtf named as the maker? could be legit? could be just rebug?

[StealthLord]

The first link has been corrected. cotojestwtf's created, among others PS3DNS Server Mapper

And it is written clearly. Testing at your own risk. Best to have a flasher and tested only on 16MB NAND