Go Back  
Reply
 
Thread Tools
Old 07-23-2012   #241
benzinjiq
Member
 
benzinjiq's Avatar
 
Join Date: Nov 2011
Posts: 323
Likes: 318
Liked 167 Times in 105 Posts
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Ok, I've went throught the whole procedure, and everithing went OK. The problem now is that I can't seem to be able to install DEX 4.11. Is it possible that something failed? I'm still on 3.55 and I can see *Install Packeges/*Apphome, but can't install DEX...
In Recovery Menu it says: No software found (or something like this). And If I try through the XMB it gives me Error 80029CCA (data corrupted).
How will I understand, that I'm CEX or DEX ? I can't see any new menus... Sorry for the n00b questions, but I've been through the whole tut with no problem, and now... :D Kinda funny...

I could try to install normal CEX 3.55 ROGERO CFW, but I'm not sure, that it is safe, just for testing. Any help would be nice
__________________

Last edited by benzinjiq; 07-23-2012 at 02:21 PM.
benzinjiq is offline   Reply With Quote
Old 07-23-2012   #242
Hells Guardian
Member
 
Join Date: Jul 2012
Posts: 397
Likes: 29
Liked 57 Times in 46 Posts
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Not sure but start over. make sure you have a valid flash etc.
Hells Guardian is offline   Reply With Quote
Old 07-23-2012   #243
benzinjiq
Member
 
benzinjiq's Avatar
 
Join Date: Nov 2011
Posts: 323
Likes: 318
Liked 167 Times in 105 Posts
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Yes, that's what I'm, about to do, because it's really sneaky to understand what did I do wrong... I'm too tired now... maybe tomorrow. Thanks anyway.
__________________
benzinjiq is offline   Reply With Quote
Old 07-23-2012   #244
CaptainCPS-X
Homebrew Developer
 
CaptainCPS-X's Avatar
 
Join Date: Sep 2010
Location: Puerto Rico, U.S.
Posts: 906
Likes: 1,066
Liked 2,021 Times in 512 Posts
Mentioned: 347 Post(s)
Tagged: 0 Thread(s)
Sorry guys that I haven't been around answering some question regarding my tutorial, and thanks to those who are helping others

I been busy working all day, but I will try to be around soon and help in any way I can.

PS: I just bought another CECHE01, it will arrive in a few days, apparently the BD-Drive is damaged, but I will replace it with the one from my bricked PS3. Hopefully if everything goes fine and if the FW is 3.55 or below, I will be back in action with more DEX research , right now it is unknown what FW it have, but probabilities are kinda 50/50 since the person who had it, told me that is been more than 1 year since she used it xD (fingers crossed LOL)

BTW, as an off-topic note regarding DEX FW (before I forget), have someone tried pressing while having an original PS3 game on the drive? there is a option with a 'star' called "Check", it will give a lot of information about the game files, including their FW version, SDK version and apparently there is a decryption process done while checking .sprx / EBOOT.BIN files. It will create some log files on your USB Storage Device if you have it plugged in. This might help people with more knowledge get somewhere regarding the decryption of games (maybe TB does something like this to get the decrypted game files, idk).

To see the what I mean, you must be using DEX 4.11 for example and try putting a 3.55+ original game on the drive, then do the Check from XMB.



SeeYa!
__________________
gamePKG / FB Alpha RL - [ https://github.com/CaptainCPS ]
FB ALPHA DEV TEAM - [ http://neosource.1emu.net ] [ http://www.barryharris.me.uk/ ]
PS3 - [CECH-2501A][NOR][160GB HDD][REBUG CFW 4.41.2 LITE]

Last edited by CaptainCPS-X; 07-23-2012 at 06:19 PM.
CaptainCPS-X is offline   Reply With Quote
Likes: (2)
Old 07-23-2012   #245
tul
Member
null
 
Join Date: Sep 2010
Posts: 38
Likes: 1
Liked 2 Times in 2 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
hi, trying to get back to CEX i loaded trought multiman the orignal dump he perfomed in the first place, in the reboot sequence to install the CEX firmware the ps3 wont boot anymore, alot of beeps and turn off automaticly, any help?

got a dump from multiman and from memdump, E3 Flasher is the solution?
tul is offline   Reply With Quote
Old 07-23-2012   #246
zaphod
Member
 
zaphod's Avatar
 
Join Date: Feb 2008
Location: universe
Posts: 241
Likes: 84
Liked 58 Times in 47 Posts
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Originally Posted by tul View Post
hi, trying to get back to CEX i loaded trought multiman the orignal dump he perfomed in the first place, in the reboot sequence to install the CEX firmware the ps3 wont boot anymore, alot of beeps and turn off automaticly, any help?

got a dump from multiman and from memdump, E3 Flasher is the solution?
sounds like a brick.. NAND or NOR? cause E3 is only useful for NOR Chips. (or you are an expert in soldering :-) look for progskeet..

dont flash back with multiman when you dont have the very last version of it which should be fixed in NAND-handling... i found these:

multiMAN_ver_04.04.03_BASE_(20120722).pkg
multiMAN_ver_04.04.03_BASE_DEX_(20120722).pkg

search the brewology site for it.. and on XXXcrunch you find them to i think..


try all dongles you have.. also the rsod-thing.. good luck!
__________________
no way but the hard way..
FAT PS3 / CECHC04 / COK-002 / 256 MB NAND
SLIM PS3 CECH2004 / DYN-001 / 16MB NOR with E3
zaphod is offline   Reply With Quote
Old 07-23-2012   #247
tul
Member
null
 
Join Date: Sep 2010
Posts: 38
Likes: 1
Liked 2 Times in 2 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
its a nor, what you mean by try all the dongles, already tried E3 card with service mode and no go.

if a turn of power the console simply turns, and power off, after that the console will power on, beep like and ambulance and then power off, if i have some USB Pen in the console during the power on -> power off the pen blinks but doesnt do **** :D
tul is offline   Reply With Quote
Old 07-23-2012   #248
StriderVM
Member
 
Join Date: Jul 2012
Posts: 49
Likes: 1
Liked 5 Times in 3 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Originally Posted by benzinjiq View Post
Ok, I've went throught the whole procedure, and everithing went OK. The problem now is that I can't seem to be able to install DEX 4.11. Is it possible that something failed? I'm still on 3.55 and I can see *Install Packeges/*Apphome, but can't install DEX...
In Recovery Menu it says: No software found (or something like this). And If I try through the XMB it gives me Error 80029CCA (data corrupted).
How will I understand, that I'm CEX or DEX ? I can't see any new menus... Sorry for the n00b questions, but I've been through the whole tut with no problem, and now... :D Kinda funny...

I could try to install normal CEX 3.55 ROGERO CFW, but I'm not sure, that it is safe, just for testing. Any help would be nice
If I understood your post, you don't seem to update the firmware via "Install Packages" . You will need to use the PS3 Service Mode (The one that requires you to hold the power button until it beeps three times.)
************* [ - Post Merged - ] *************
Originally Posted by aries2k View Post
My hdd was also sdd1 and I did what you did. then I also just saw my usb drive and no option for hdd.
my problem was I had missed
step 1
11- Choose "Restore PS3 System".

don´t know how I missed that...I was wondering when I was going to format,lol.
Have you formatted your hdd yet?
Haha, yes, that was also exactly what I did wrong! (Although it did screw up on the metldr dump as well. Fortunately the CEX>DEX application can easily tell you botched it up by showing the root keys.)

I was able now change to 3.55 DEX with peek and poke with the guide by Captain. Thank you very much for the tutorial!
StriderVM is offline   Reply With Quote
Old 07-23-2012   #249
carldenning
Senior Member
 
Join Date: Jun 2009
Posts: 5,127
Likes: 1,880
Liked 1,792 Times in 1,172 Posts
Mentioned: 220 Post(s)
Tagged: 0 Thread(s)
Originally Posted by tul View Post
its a nor, what you mean by try all the dongles, already tried E3 card with service mode and no go.

if a turn of power the console simply turns, and power off, after that the console will power on, beep like and ambulance and then power off, if i have some USB Pen in the console during the power on -> power off the pen blinks but doesnt do **** :D
not beeing funny but if your ps3 is a nor then why u followin nand guide and also u posted your problem in the wrong thread , post it in the nor dex thread
__________________
carldenning is online now   Reply With Quote
Old 07-23-2012   #250
tysovsky
Member
null
 
Join Date: Jul 2012
Posts: 48
Likes: 10
Liked 2 Times in 2 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Yet I finally decided to flash dex nand backup to my CECHA, and it worked. Gonna test things on 4.11 dex tomorrow. Thank for guide Captain.

Sent from my LG-P970 using Tapatalk 2
tysovsky is offline   Reply With Quote
Likes: (1)
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



PS3Hax.net is Copyright © 2010-2013.
Use of this site is governed by our Terms of Use and Privacy Policy. All Trademarks and images are owned by their respected owners.
Posts and links are subject to each author on this forum and are no way affiliated with the operations and/or opinions of ps3hax.net
All times are GMT -5. The time now is 01:32 PM.